Question about 2004 Nissan Titan

2 Answers

2004 Nissan Titan LE 4x4 4LO position indicator light flashes

I have a 2004 Nissan Titan LE 4x4. I've noticed recently during hiway driving in 2 wheel drive my "Transfer 4LO position indicator light" flashes alternatly with the flashing of the "4WD shift indicator light". Whenever I get off the road and put it in 4WD, both high and low work fine. I have also run the judgement self diagnosis which shows your start signal and the flickering of the 4WD warning lamp, to check this problem out. The flickering pattern was a total of 9 blinks. It is telling me that there is more than two switch inputs simultaneously detected due to short circuit of 4WD shift switch. That's as far as the information I have takes me. Can you please steer me in the right direction? Also, while looking under the hood on the drivers side there is a loose hose that comes up next to the air cleaner box and does not connect to anything. The other end of the hose is connected to the top side of the front drive unit. Is this correct that the top of this hose is not connected to anything?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with mine flashing did u find out what it was

Posted on Dec 15, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 454 Answers

As far as your 4WD light problems, can't help you. The loose hose sounds like the front diff vent hose.

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Silverado 4WD. Service 4WD dash light comes on after engaging 4WD and acts up by engaging itself randomly for several days, then goes back to normal.


Check connection at the 4X4 control module , check power and grounds . Do you know how to do basic electrical testing ? Does your truck have manual or automatic trans mission ? Which transfer case does yours have ?

The NVG 263 transfer case features a three button shift control switch located on the instrument panel. When the ignition is in the RUN position, the transfer case shift control module (TCCM) starts monitoring the transfer case shift control switch to determine if the driver desires a new mode/gear position. At a single press of the transfer case shift control switch, the lamp of the new desired position begins flashing to inform the driver that the TCCM has received the request for a new mode/gear position. The lamp continues to flash until all shifting criteria has been met and the new mode/gear position has been engaged. Once the new mode/gear position is fully active, the switch indicator for the new position remains ON constantly. In the event that the TCCM can not or will not complete the shift, the indicator returns to the previously selected position; this is a Transfer Case Shift Control Switch Indicator Flashes, then Returns to Previous Mode condition.

The NVG 263 transfer case provides the driver with 4 manual mode/gear positions:
• 2HI - 2 Wheel Drive high range
• 4HI - 4 Wheel Drive high range
• 4LO - 4 Wheel Drive low range
• Neutral
Have it check for DTC'S - diagnostic trouble codes ?

DTC B0790
DTC B2725
DTC C0306
DTC C0327
DTC C0359
DTC C0379
DTC C0550

Your best bet would be take it to a qualified repair SHOP

Dec 28, 2016 | Cars & Trucks

1 Answer

4 wheel drive won't engage


Which do you have ?
Transfer Case - NVG 236 (Two Speed Automatic)
Transfer Case - NVG 233-NP1 (Two Speed Selectable)
The NV236 transfer case is an automatic transfer case with three drive ranges. Shifting from rear wheel drive to four wheel drive is done automatically when the transfer case shift control module receives wheel rotating slip information from the speed sensors. The transfer case shift control module then engages the transfer case motor/encoder to position the transfer case from rear to four wheel drive. When the transfer case shift control module receives information that the wheel rotation is the same on both axles, the transfer case shift control module sends position information to the motor/encoder to put the transfer case back into rear wheel drive. The three drive ranges are 2HI, 4HI, and 4LO. The 2HI position is for normal driving with the rear wheels pushing the vehicle. The 4HI, position is for driving through sand, snow, mud, gravel, or heavy rain at normal or slightly below normal speeds. The 4HI engages the front axle to allow for four wheel drive. The front axle is pulling the vehicle, and the rear axle is pushing the vehicle. The 4LO range is used for off road driving, heavy snow, deep mud, or shallow fording. The 4LO is similar to the 4HI except that the gearing in the transfer case is set for low speed and high torque. The NV236 is manufactured at Syracuse New York by New Venture Gear a division of New Process Gear for General Motors.
Is the switch light on or flashing ? If you have automatic 4x4 there are several DTC'S that can set >
DTC B2725 ATC Mode Switch Circuit Malfunction DTC C0300 Rear Speed Sensor Malfunction DTC C0305 Front Speed Sensor Malfunction DTC C0308 Motor A/B Circuit Low DTC C0309 Motor A/B Circuit High DTC C0310 Motor A/B Circuit Open DTC C0315 Motor Ground Circuit Open DTC C0323 T-Case Lock Circuit Low DTC C0324 T-Case Lock Circuit High DTC C0327 Encoder Circuit Malfunction DTC C0362 4LO Discrete Output Circuit High DTC C0367 Front Axle Control Circuit High DTC C0374 General System Malfunction DTC C0376 Front/Rear Shaft Speed Mismatch DTC C0387 Unable to Perform Shift DTC C0550 ECU Malfunction DTC C0611 VIN Information Error

Dec 01, 2015 | 2000 Chevrolet S-10

1 Answer

Nisan titan07 at chek how to fix it I wash the engine


Nissan Titan automatic transmission not shifting gears ...

www.fixya.com > ... > Cars & Trucks > Nissan
Nissan Titan cars & trucks automatic transmission not shifting gears questions and answers. ... I have a 2005 nissan titan, the check engine light is on and when shiftingto D position it won't drive with power, it seems ... 2007 Nissan Titan LE.

Sep 16, 2015 | 2007 Nissan Titan LE

1 Answer

4HI, 4LO and VSC OFF lights are flashing, the ABS and Slip Indicator lights stay on. I was operating in 4Hi earlier and all worked ok. Parked truck for about 2 hrs and then re-started to drive away the...


lot of time 4X4 will engage only in neutral and disengage in neutral. some times switching from drive to neutral and revers will help to disengage. just sake back and for till you feel the 4X4 is off.
Good luck

Mar 15, 2015 | 2011 Toyota Tundra

1 Answer

How do I fix my 99 blazer the dome lights won't turn on and the 4 who drive won't light up or work


In the instrument panel fuse box fuse # 8 CTSY LP 10A ,that's for the dome lights, fuse panel is left side of IP. What are you talking about 4 who drive won't light up or work ? 4 wheel drive ? Do you have two speed automatic or two speed selectable ?
Switch Indicator Lamps Do Not Light - One or More ? Check fuse #15 IP fuse box 10A 4WD . This is for two speed auto !

Circuit Description

The indicator lamps circuits consist of 5 individual lamps contained inside the mode/range switch assembly, they are AUTO, 4WD, 2HI, 4HI, 4LO and NEUTRAL. The AUTO, 4WD, 2HI, 4HI, and 4LO lamps are contained inside their respective range button. When the ignition is ON, the transfer case shift control module illuminates the indicator lamp that corresponds to the current ATC gear position by providing a ground through a current limiting driver.
The transfer case shift control module flashes each indicator lamp after a shift has been requested and will continue to flash until the transfer case shift control module can complete the shift. After a shift to AUTO, 4WD, 2HI, 4HI, or 4LO is made, the transfer case shift control module will flash that indicator lamp until the transfer case shift control module receives a high voltage signal on CKT 1695 from the front axle switch.
A solid state circuit located inside the switch supplies ignition voltage to the lamps. The solid state circuit also receives voltage whenever the headlamp switch is in park or headlamp position. When the solid state circuit receives voltage from the headlamp switch it will reduce the voltage that it supplies to the indicator lamps, dimming the lamps when the headlamps are ON.

Feb 07, 2015 | Cars & Trucks

1 Answer

Error message repair 4wd


I guess you probably don't know what transfer case you have ?
SERVICE 4WD
Refer to
?€¢
Transfer Case Description and Operation in Transfer Case - NVG 149-NP3


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 246-NP8


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 261-NP2


?€¢
Transfer Case Description and Operation in Transfer Case - NVG 263-NP1


The NVG 246 EAU provides 5 modes, Auto 4WD, 4HI, 4LO, 2HI and Neutral.
The four manual mode, or range gear positions, of the NVG 261 transfer case are:
?€¢
2HI - 2 wheel drive high range


?€¢
4HI - 4 wheel drive high range, part-time


?€¢
4LO - 4 wheel drive low range, 2.72:1 gear ratio reduction


?€¢
N - Neutral, 4 wheel


The NVG 263 transfer case provides the driver with 4 manual mode/gear positions:
?€¢
2HI - 2 Wheel Drive high range


?€¢
4HI - 4 Wheel Drive high range


?€¢
4LO - 4 Wheel Drive low range


?€¢
Neutral


With the info I've given you ,you should be able too now !
There is probably a code stored somewhere !
DTC B0790 DTC B2725 DTC C0300 DTC C0305 DTC C0306 DTC C0321 DTC C0327 DTC C0359 DTC C0374 DTC C0379 DTC C0550.

Jan 31, 2015 | 2004 Chevrolet Silverado 2500

1 Answer

2007 chevy trailblazer won't go into 4 wheel drive


Have you had codes checked ? While connected to a good scanner that will check transfer case switch to show if switch is working, and it could be the switch on the side of the transmission.

Feb 10, 2014 | Cars & Trucks

1 Answer

Can the four wheel drive actuator freeze up and cause the four wheel drive to not engage ?


yes. sometimes not servicing the differential can cause the actuator to stick in position. either you can or cant put it in 4 wheel. you may have to replace the actuator and service the differential to cure this. hope this helps

Feb 04, 2011 | 2004 Nissan Titan

1 Answer

My brake, slip and VDC indicators stay on.


Check brake fluid level, add fluid from sealed container if needed.

Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.

May 06, 2010 | 2004 Nissan Titan

Not finding what you are looking for?
2004 Nissan Titan Logo

1,289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...