Question about 1988 Chevrolet S-10

1 Answer

The transmission won,t shift out of low.All I have are reverse and low.The fluid looks good.What could be wrong.?It just quit shifting .

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,927 Answers

I would have the governor removed and cleaned,if a very small piece of trash gets lodged into the governor valve,it will do this,also,the valves in the valve body maybe sticking,use a product called Lucas for transmissions,it will un-stick the valves in the valve body.The only other reason would be poor hydraulics ,weak pressure,witch could be a filter restriction,or pump problem,or servos bad,witch if it is,it would need rebuilding,unless it is the filter.

Posted on Feb 08, 2010

  • Ronny Bennett Sr.
    Ronny Bennett Sr. Feb 08, 2010

    I told you wrong on the product name,it is called Lube guard,found at NAPA auto parts.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission won t shift out first gear


Clogged transmission coolant line. Use air to blow out and replace filters and fluid.

Mar 11, 2014 | Dodge Durango Cars & Trucks

1 Answer

I have a 2005 Ford Taurus, it'll shift out of park


cound be transmission fluid too low or transmission filter could be clogged.

Jul 08, 2013 | Cars & Trucks

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

F250 1998 light duty won't shift out of park


For car not changing gears and not shifting out of park mode ,it can be shifter assembly issue, or it can also be transmission issue. Get the shifter assembly inspected with ignition OFF.

For more troubleshooting, I suggest you to get the Following help link checked, its complete step by step procedure to inspect gear shift issues: -----

GEAR SHIFT ISSUES

http://alltypesofpartsreplacing.blogspot.com/2012/11/gear-shift-issues.html

==========


NO REVERSE ON TRANSMISSION
http://alltypesofpartsreplacing.blogspot.com/2012/12/no-reverse-on-transmission.html
-------------

Transmission fluid leak, transmission gears slip,
http://alltypesofpartsreplacing.blogspot.com/2012/12/transmission-fluid-leak-transmission.html
----------


These will help.

Thanks.

Dec 06, 2012 | 1998 Ford F250 SuperCab

1 Answer

2000 nissan quest won't shift to reverse


first have you checked the fluid level? are there any codes? does the transmission shift good in other gears?

Oct 31, 2012 | 2000 Nissan Quest

1 Answer

My rebuilt transmission won't go forward?


i would be checking the shifter cable adjustment first see how that goes goodluck

Sep 18, 2017 | 1992 Ford F250

1 Answer

2003 chevy trailblazer transmission chugs


For Automatic transmission problem,Check the list of help links below.click the link below:----Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 01, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Car jerks when you shift gears


If that oil is transmission fluid, you may be low on fluid. That would cause harsh shifts. Make sure your transmission is full.
Is it just reverse and drive that ****? Do second and third shift smooth? If so, you may have a too-high idle.
If idle is good, and your transmission didn't get low on fluid, then I would suggest you drain and refill the transmission, and install a new transmission filter while you have the bottom pan off. Usually, you can buy a filter and pan gasket as a kit.

Nov 17, 2011 | Mitsubishi Cars & Trucks

2 Answers

2001 f350 v10 automatic transmission will not engage gears


Hi Brent,

No gears at all is not a good sign. About the only things that can cause all the gears to go out at the same time is either the transmission has a severe fluid leak and there is no fluid left to engage the clutches or you have something broken like an input shaft.

If your truck is a 4X4 make sure there is not something silly like the transfer case being in neutral.

Otherwise, check your fluid level. If it is really low, then you need to find out why. If it is not low, look at the color of the fluid and smell the fluid. Good fluid should be pink or red. Bad fluid will be dark brown and will have a burnt smell to it.

If the fluid looks and smells bad, then it is probably time for a transmission overhaul.

Oct 31, 2011 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Automatic transmission sounds like it stuck in 3rd gear


You need to check the transmission fluid level, if it is low the tranny will not shift. If, however, the fluid is to the proper level then you will need a new transmission.
Try putting new fluid in and look for a leak in the pan gasket, then all you may need is a transmission service. When the service is done the mechanic will look for pieces of metal in the old fluid, if found this is very bad and you will need a new tranny.
You might consider a new or used car, you can definately find a good deal out there!

Nov 16, 2008 | 1994 Hyundai Excel

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...