Question about Dodge Ram 1500

1 Answer

I resenty bought a brake controler for my 97 dodge ram 1500. it came with a wire harness that should go with my truck but i cant find where to plug it into.

Posted by on

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Plug brake control adapter into mating receptacle on backside of brake control before attaching to the vehicle connector.
1. Locate the vehicle’s electric brake control harness connector. The harness will be located underneath the dash and left of the steering column, taped to another harness near the emergency brake pedal. There will be a 4-pin connector that mates with the one on the adapter.
2. Plug the brake control adapter into the vehicle’s electric brake control harness connector. Follow all brake control manufacturer’s installation instructions.

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I instALKLED A 94 318 V-8 INTO MY 97 RAM 1500 THAT HAD THE 360 IN IT. NOW THE ENGINE TURNS OVER BUT WONT START. NOT SURE WHY BUT DO i NEED TO CHANGE THE COMPUTERS AS WELL?


Yes you must install the whole wiring harness and engine sensors and the computer must be replaced, one system is OBD1 (94) the other is OBD2 (97), the two control systems are not compatible.

Jan 04, 2017 | Dodge Ram 1500 Cars & Trucks

1 Answer

Break Light wiring diagram for 1998 dodge ram 1500


haynes repair manual has a brake switch diagrame

Feb 11, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

2001 dodge ram 1500 driver's rear blinker and brake light not working. Unplugged short harness at light, and no power going to plug. Any suggestions ???


trace all the wires back to the front of the truck and check for any broken wires. Also be sure that there is a good ground at the end of the wires behind the light

Nov 11, 2009 | 2008 Dodge Ram Pickup 1500

1 Answer

2004 dodge ram 1500 slt wiring diagram for hooking up a brake controller for a trailer


Try http://www.etrailer.com/faq-wiring.aspx. If it is factory installed, there should be a plug in next to/behind the parking brake pedal... at the top. Not easy to see or get to.

Oct 18, 2009 | 2004 Dodge Ram 1500

1 Answer

HORN DIAGRAM FOR A DODGE RAM 1500 (CONNECTIONS)


Battery Constant 12v+ Positive Wire (+): Black/Orange And Red/White
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness
Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness
Ignition Positive Wire (+): Blue (16 Gauge)
Ignition Positive Wire Location: Ignition Switch Harness
Second Ignition Positive Wire (+): Yellow/Red
Second Ignition Positive Wire Location: Ignition Switch Harness
Accessory Positive Wire (+): Blue (10 Gauge)
Accessory Positive Wire Location: Ignition Switch Harness
Second Accessory Positive Wire (+): Orange
Second Accessory Positive Wire Location: Ignition Switch Harness
Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: At Headlight Switch
Power Door Lock Positive Wire (+): Orange/Violet
Power Door Lock Positive Wire Location: In Drivers Kick Panel, White 6-Pin
Power Door Unlock Positive Wire (+): Pink/Violet
Power Door Unlock Positive Wire Location: In Drivers Kick Panel, White 12-Pin
Door Trigger Negative Wire (-): Yellow
Door Trigger Negative Wire Location: At Headlight Switch
Domelight Supervision Wire: Use Door Trigger (Requires Relay)
Domelight Supervision Wire Location: N/A
Horn Negative Wire (-): Black/Red
Horn Negative Wire Location: At Steering Column Harness
Tachometer Wire Negative Wire (-): Gray
Tachometer Wire Negative Wire Location: At PCM, Connector 1, Pin A7. The PCM (powertrain control module) is located on the firewall next to the wiper motor.
Brake Light Positive Wire (+): White/Tan
Brake Light Positive Wire Location: At Switch Above Brake Pedal
Factory Alarm Disarm Wire (-): Black/Orange (To disarm requires a (-) negative through a 1565 ohm resistor and an extra relay to connect.)
Factory Alarm Disarm Wire Location: In Drivers Kick Panel, White 12 Pin Plug
Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A

Aug 22, 2009 | 1998 Dodge Ram 3500 2WD

1 Answer

Need wirering diagram to hook up trailer lights and elecric break


Also try http://www.etrailer.com/faq-wiring.aspx. They have a great website with lots of info. With the tow package, there should be a plug under the dash... far left above the emerg. brake petal. The harness that plugs into it should have came with the truck, or you can order one to fit it. Did thew truck come with a 7 pin plug on the back? If not you can order one from the above mentioned site. They also have the wiring colors.

Aug 12, 2009 | 2004 Dodge Ram 1500

2 Answers

1998 dodge ram 1500 4x4 stereo wiring


glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....

black/ light green = ground
dark green = left front spkr +
purple = right front spkr +
blue/white = right rear spkr -
brown/blue = left rear spkr -
brown/yellow = left rear spkr +
blue/orange = right rear spkr +
black/yellow = park lamps
brown/red = left front spkr -
orange = dimmer signal
pink = fused battery +
green/red = radio choke relay
red/white = fused ignition
blue/red = right front spkr -

cheers

djmac62 is also an excellent answer

Jan 10, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...