Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

How do I replace the front turn signal lightbulbs in my 2000 Ford F250 Super Duty?

Posted by on

  • Anonymous Mar 31, 2014

    Turn signals aren't working I have found that the instrument plug when I unplug it that the turn signals work but my gauges don't but when I plug it in everything works except the turn signals need help please

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

There are 2 screws on the bottom side of the turn part of your truck. The orange or clear on some models. In between the bumper and the lights you will find them. Remove the 2 screws then you need to pop the turn light out of the sockets in the header panel they fit into. Just apply even pressure to the outside by the fender with your fingers and wiggle until it pops loose and then do the same for the inner one. Once completely loose you can then turn the bulb socket which will pop out and you can see the bulb. Push in and turn the bulb counter clockwise until it releases and remove it. Replace it and reassemble in reverse!

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 F250 Super Duty Diesel 7.3 L. There is nothing blowing out of my vents. No a/c or heat. I checked fuses, all ok. When I shut the hood, it came back on. This keeps happening though.


sounds like your vaccume pump is sticking,when you slam hood it un sticks ,need to replace pump assy ,on pass,front behind battery ,1 vacc line ,1 connector,3 10mm bolts

Aug 06, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Need to replace horn in 2000 F250


The horn is inside the right fender well, the inside fender well has to be removed for access but I believe the bolt for the horn assy. is under the battery tray and that may have to be removed also to gain access to the bolt.

Jul 20, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Where is the turn signal flasher relay located on a 2001 f150


2001 Ford Truck F250 Super Duty P/U 4WD 5.4L EFI 8cyl the Flasher is located front seating area, driver side, behind left hand side of instrument panel, on fuse panel. Check the FUSE PANEL...

0bd595d.jpg


Also can check this and other details in your 2001 Ford F-250 - Owners Manual. (page 172 and next).

Good luck (remember rated this help).

May 13, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

How to remove front fender on 2002 ford f250 super duty .


take off the fender bolts and the wheel well bolts take out headlight bolts behind the headlight then it should come off

Mar 28, 2010 | 2002 Ford F250 Super Duty SuperCab

2 Answers

Ford F250 SD, 2wd. Replacing front bearing


If you have front disk brakes you have to remove the brake caliper to get the rotor off.

Oct 03, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL


hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.

Mar 15, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

2000 ford f250 super duty front windows and door locks


hola
les ecribo dede la patagonia, compre una ford 250, año 2000, tuve un choque y la camioneta no anduvo mas, quiero saber como se desactiva el sensor de choque , ya que la camioneta no funciona el motor.
atte.
Cristian Luna

Jan 11, 2009 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...