Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Grinding noise driver side front at low speed . have changed hub assembly goes away for a little while then comes back . can spin the hub and dont feel like bearing is bad. really getting to me

Posted by on

  • tintmasterpl Feb 06, 2010

    Yes sorry it is 4 wheel drive with 7.3 engine.

  • frank thomas wilson
    frank thomas wilson May 11, 2010

    4 wheel drive?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Did you recently swap tires from back to front. I had very annoying wheel bearing type noise and the tires were not noticeably worn (Bridgestones) but apparently some wear pattern was causing my noise. Swapped them back.

Posted on Feb 14, 2010

Testimonial: "thats exactly what it was. never would have thought it. Thank you for your reply"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding noise front wheel


1st have the brake pads checked, then if the pads are OK you likely have a defective wheel bearing/hub assembly

Mar 24, 2014 | Mercury Sable Cars & Trucks

1 Answer

Metal grinding noise when Turning Left only


Check the brake system of front right wheel. I am sure, the problem is there only.



Car Accessories

Aug 01, 2012 | Cars & Trucks

1 Answer

I have a grinding/scraping noise when driving forward. It sounded like rear brakes, and I checked/replaced rear parking brake parts that were suspect. Also changed rear drive shaft ujoints after noise...


Good Evening, those noises can be annoying and sometimes hard to find. However it sounds like you have a front hub assembly going bad. Usually the noise goes away when you veer one direction or the other. I have heard some transfer case noises but they usually do not go away on turns. Check those front hub-wheel bearing assemblies and see what you come up with. Hope this points you in the right direction.

Oct 08, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

Hi my car is makin a roaring noise front driver side


prop the front wheel up and spin the tire around
Listen for the grinding noise. If there replace the hub and bearing assembly

Mar 29, 2010 | 2001 Chevrolet Cavalier

1 Answer

Removing front hub assembly


I've never heard a hub make a rattle noise. A bad hub bearing will usually make a roaring or whining noise at speed and/or it will have play in it. When is the rattle noise made, over bumps, at a slow speed, at high speeds?

Jan 02, 2010 | 2000 Jeep Cherokee

2 Answers

I have a grinding sound on the front driver side when i turn left only wat is it


could be you brake pads are low, you have a lip (indentation from ware) on you brake rotors have your brake pad linings check and turn your rotors. hope this helps

Aug 26, 2009 | 2004 Oldsmobile Alero

3 Answers

Scraping pulse noise r front merc sable


Check the condition of the wheel bearings, front and back side if the brake rotor, and the back side of the rim. Everything should be clean, rust build-up can throw everything out of true. The hub or wheel-bearing should be tight and smooth when spun.

May 12, 2009 | Mercury Sable Cars & Trucks

5 Answers

Volvo XC70, Grinding Noise


sounds like c/v axles (front drive shafts) they will make a clicking sound normally when turning sharp and accell at the same time at slow speeds / look at the axle boots and look for grease on the inside of the front wheels leaking out the axle boots

Oct 07, 2008 | 2001 Volvo V70

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...