Question about 2005 Dodge Grand Caravan

1 Answer

How to remove & replace a 2005 Dodge Caravan Sliding Door Motor?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

Remove Negitive battery cable. Remove 2nd row seat on the side to be replaced or remove bench. You have to do this from the inside of the van with the door closed. Remove the upper trim aroud the window by lifting from the bottom & pull up and out to pop the clips free. Starting on the bottom of the side door panel lift the panel out and up do not brake the upper part around the lock pin. Remove sound proofing sheet. The door motor is at the bottom. Remove the U-Clip holding the drive flex to the motor use neddle nose pillers. Use a trim tool or pillers to reve the plastic push fasterners. If using pillers use the pillers only on the flat side. ##Note have seen motors attached with bolts. Remove motor. Instalation is reverse of removal. Note## When installing sound proof sheet aplly spray tact.

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace sliding door motor on 2002 dodge grand caravan ex


There are alot of little things that are hard to explain. Would say buy a Chilton with all the pics of just what to do $20 good advice








































































































Remove trim panel from door using a trim tool, use this or maybe break a clip. Remove retaining clip using needle nose pliers from flex drive assembly to door motor. Remove flex drive cable pulling straight out. Disconnect the elec. connector from motor depressing the tab. Carefully pry out the 4 push pin fasteners...Hope this helps





Jan 17, 2010 | 2002 Dodge Grand Caravan

1 Answer

Sliding door panel 2005 chrysler T&C


ba43568.jpg

e420a16.jpg

If you need anything else, let me know.

Aug 29, 2009 | 2006 Dodge Grand Caravan

1 Answer

Automatic Sliding Door problems on 2005 Dodge Caravan


We have the same problem, just opposite doors - the passenger slider will close to 80%, but the driver still functions fine. There must be an easier solution than new wiring harness/motor??

Aug 19, 2009 | 2005 Dodge Caravan

2 Answers

Power sliding door opens part way


Replace the wire track harness in the lower door opening.

May 29, 2009 | 2005 Dodge Caravan

1 Answer

Power sliding door opens part way


it must be having problem with the electriacl motor for this motor might have gone weak & felt to do rather required function so better check for this issue to your nearest authorised dealer or service centre for this issue they surely help you out with the problem you are facing or dealing with so untill then see you sir do keep in touch for more problem we might help you out

May 24, 2009 | 2005 Dodge Caravan

1 Answer

Sliding door wires 2005 caravan


Hi my name is Allen!

Those wires are called track wiring and it depends what options you have, if you have power sliding doors, they run power and ground to the motor that moves the door, it's a common problem for the wire to break and your door want move. If thats what your problem is, just replace the wiring and the power door will work properly. The wiring is also for the power locks so they will lock and unlock.

For further assistance contact me at FixYa!

Dec 30, 2008 | 2005 Dodge Caravan

2 Answers

Dodge caravan sliding doors


First, keep in mind that as you begin to remove these doors you run the risk of causing serious scratches to the paint and glass, so put some masking tape and/or plastic sheeting around both sides of the door (rear quarter panel and rear glass, front door and front door glass)
I would get a Haynes repair guide since that's what I have to work from and it will tell you step by step with pictures, what to do. It's not hard, but you need to get all of the attach points unhooked to be successful. Suggest you have a helper working with you to keep the door steady.

Oct 27, 2008 | 2005 Dodge Caravan

Not finding what you are looking for?
2005 Dodge Grand Caravan Logo

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...