Question about 2004 Mazda 6

1 Answer

Both low beam headlights are out. Don't know if

Both low beam headlights are out. Don't know if it's the bulbs, but all fuses interior and under the hood are good. Is it unussual for both low beam headlights to burn out at the same time?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 200 Answers

Could be the dimmer switch. Probably located near the base of the steering column and activated by a long rod from the lever.

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

No headlights for my 2002 hyundai accent GL.


Check the bulbs could be blown low beam

Jan 03, 2015 | 2002 Hyundai Accent

1 Answer

Low beam headlight - passenger side - on my 2006 Buick Lacrosse does not work. I've tried a new bulb - no help. The fuse - underhood fuse box - for the low beam is good. There is no voltage to that fuse...


From Info I have looked at I believe under hood micro switch relay 35 is for low beam and 34 is for high beam. It also looks like you have a different fuse for each light. The relay are for both low beam or both high beams. each headlight has its own fuse. I believe #4 fuse under hood is for passenger side low beam. fuses 1-4 under hood are for the four headlights as I understand the info I have seen.

Aug 04, 2017 | 2006 Buick LaCrosse

2 Answers

2003 GMC Envoy low beam head lights will not come on. The bulbs are not blown, fuse's ok, no power coming to the head light connector. minimal power to the fuse compartment with fuse removed. 9 to 10...


The problem is a Headlight module. Fuse box under the hood has two black modules side by side, the one on your right is the headlight module the one on the left is the fan module. Try swapping them, if the headlights work replace bad module, don't drive vehicle with the bad module in the fan slot. Mine kept going bad because I had a high intensity bulb on one side.

Oct 02, 2011 | 2003 GMC Envoy

4 Answers

Both Low beam headlights aren't working in my 2002


my suggestion is that you check/ replacr the HDM(headlight driver module) relay in the main fuse box located under the hood near the battery.

Jul 30, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

High beams work low beams do not


you don`t say if you have checked the fuses for the headlights.if the fuses are okay and you know that the low beam filaments are working.you may have to feed power and ground directly to the proper headlight prongs from the battery to make sure the bulbs are good.then it could be a relay for the low beams or a switch for the headlights.you don`t say if you have daytime running lights on this car as there is a module for this system that may be the problem for the now low beams.

Mar 28, 2011 | 2006 Chrysler PT Cruiser

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

1 Answer

I only have high beam headlights. I have replaced the light bulbs and checked the fuses. All the other lights work.


about troubleshooting your headlights on your vehicle. I would isolate the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light poke the wire and see if the test light illuminates with the headlight switch on. ---- Also check the wires, and check the fuse for your low beams. could of blown a fuse on your lows, but your highs will still work.
Every single time I have had a failure of low beam in a headlight without failure of high beam, it has been because the lamp bulb or halogen lamp module has reached the end of its serviceable life, not because of any wiring problems. Low beam burns out first because it is on the most. If low beam is lost simultaneously in both headlights, I would check fuse first, then the headlight switch. If low beam is lost on one side only, it is almost always going to be due to the bulb or lamp module needing to be replaced. In that case, replace them in both headlights because the other one will be going kaput in short order, as well.
There is something to check. Does the low beam relay click when you turnt he low beams on?
if it does not click then
Then find the BCM at the base of the steering column. In there find the grey connector and in there, find the pink/white wire in terminal A4. Use a wire to jump that wire to ground. IF the low beams come on, then it is likely the BCM is bad.
Also check a bad wire between the fuse block and the BCM. before replacing the BCM . Start under the fuse block. This is the fuse block under the hood.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Mar 18, 2010 | 2004 Chevrolet Cavalier

1 Answer

No low beam only high beam


check the ground connection of the bulbs. check the light switch. the headlight relay is located under the dash or under the hood.

Nov 25, 2009 | 1994 Mazda 323

Not finding what you are looking for?
2004 Mazda 6 Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...