Question about 1992 Honda Accord

1 Answer

Horn and brake lights

Well i dunno i was goin 2 lunch from work when i went through decent size puddle. Got back to work and a little while later heard my horn going off constantly so i tried pressing horn button and kept goin intil I started it. Now it doesnt work and car wont shift from park unless i use shiftlock release.(which gonna fix buy putting new brake light switch in)

Well I changed brake light switch and still nuthing, Im wondering should I try horn relay but i cant find it

Posted by on

  • bigzo22 Feb 06, 2010

    checked horn fuse and was blown replaced and it blew again

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

First if brake lights arent working then the shiftlock wont work. Works off of same circuit. I would check fuses for brake lights and also horn. Not exactly sure on the 92's but good chance theres fuse's inside car and also under hood.

Posted on Feb 06, 2010

  • Matthew Raker Feb 06, 2010

    Sounds like you might have gotten alot of water into the fuse/relay box. not possitive of the location but know its under hood in a black plastic like box. If youve got extensive water in that box it could cause lots of problems.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have electrical issues on a 2004 mazda 3.


I would check every single fuse in the car. Blown fuses can cause weird issues like this. While the initial issue with the mechanic does sound like an alarm problem....the rest does not unless the shop that installed it really butchered the job.

Jul 18, 2016 | 2004 Mazda 3

1 Answer

2001 4Runner. Car security went bust first, then the horn stopped working, then the hazard lights. Now, the brakes as well. Any help please?


All except the brakes sound like fuses failing, or wires breaking. A quick check of the fuse box should remedy those.

What do you mean by "the brakes"?

does the pedal go to the floor without stopping the truck?
do the brake lights not come on?
is the brake indicator on the dash on?

need a little more to go on

May 13, 2015 | 2001 Toyota 4Runner

1 Answer

Sebring to A Neighborhood Mechanic Due to a ABS light n I took my 2000 Chrysler Sebring to A Neighborhood Mechanic Due to a ABS light n brake light on my dashboard n he told me it was the REAR ABS...


I'm sorry to say you need trained help or a good DIY neighbour to get to the bottom of this.; The ABS sensors on the rear brakes will not lead to air in the brakes or grinding of the brakes. It sounds like you have an ABS pump fault in the main unit. This can cause the brakes to hang up after releasing the pedal. The rear wheel ABS sensors may only need their mounting positions cleaned up and their location to the brake reset, this can be as little as 1-2mm. I'm sorry for your financial situation but you are going to need help and my advice is don't drive the car until you have it fixed. Your life or someone else's is in your hands.

Nov 06, 2014 | Cars & Trucks

1 Answer

I have a 2006 Mazda 6. It got stuck in park and the brake lights and horn went out.


The problem is with the brake lights, there is a solenoid which prevents you taking the vehicle out of park unless you have your foot on the brake, the solenoid is wired into the brake light circuit. Bridge the two wires to the switch and see if the brake lights come on, that eliminates the switch, as the horn has stopped working as well the chances are it is a fuse. To test a fuse, remove it from the box and use a multi meter set on resistance and check for continuity, if they are all ok, you are looking for a wiring fault! You could try using a live fused fly lead from the battery direct to the brake light switch to put the brake lights on, and see if the vehicle will come out of park. Then it's just a matter of finding the wiring break? Try all connectors. Good Luck

Jan 21, 2014 | Cars & Trucks

1 Answer

Its -19 degrees and my 2011 Avenger is acting up


all I can say is that real cold temps are cars.Minor problems can turn out to be large ones.I\'d put car in a garage and let it warm up,and test it.

Jan 07, 2014 | 2011 Dodge Avenger

1 Answer

Drove through a puddle,power steering out and temp gauge on high, battery light on


I've seen it happen many times on the older Caravans, if you hit a really deep puddle, the splash can knock the accessory drive belt off of its pulleys. You can just gently pry the belt back on, consult a service manual for detailed installation directions.

May 08, 2012 | 1998 Dodge Caravan

1 Answer

Drivers side brake light and horn won't work,,is it the multi function switch? 1999 chev blazer 4x4 . if so how much does a new one cost?


No there not connected, replace the brake light
1999 Chevrolet Blazer Auto Light Bulb Size Guide
Low Beam Headlight Bulb Size: 9006
High Beam Headlamp Light Bulb Size: 9005
Parking Light Bulb Size: 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3057
Tail Light Bulb Size: 3057
Stop Light Bulb Size: 3057
High Mount Stop Light Bulb Size: Assembly
Fog/Driving Light Bulb Size: 880 or 881
License Plate Light Bulb Size: 194
Back Up Light Bulb Size: 3156
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 161
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168 or 211-2
Step/Courtesy Light Bulb Size: 168 or 211-2
Trunk/Cargo Area Light Bulb Size: 211-2
Under Hood Light Bulb Size: 93
Instrument-General Light Bulb Size: 161 or 37 or PC194 or PC74
Check Engine Indicator Light Bulb Size: PC74
Hi-Beam Indicator Light Bulb Size: PC74
Seat Belt Indicator Light Bulb Size: PC194
Brake Warning Light Bulb Size: PC74
Automatic Transmission Indicator Light Bulb Size: 194
Directional Signal Indicator Light Bulb Size: PC74
As for the horn, inspect the fuse and relay and most common it would be a bad ground wire or worst a bad horn due to corrosion. Horn will be located in the drivers side fender.
Thank you for using fixya.

May 13, 2010 | 1999 Chevrolet Blazer

1 Answer

Car won't start after getting wet


check your battery cable isnt loose

Apr 15, 2010 | 2006 Ford Escape

1 Answer

My Sidekicks brake lights and horn are not


car has a short.
and/or
replace brake light switch
and
replace horn switch and horn relay

Aug 04, 2009 | 1989 Suzuki Sidekick

2 Answers

Brake Light Problem


the bulbs are a dual philament eventhough the tail lights work the brake light part of the bulb is burnt out

Sep 03, 2008 | 2006 Hyundai Sonata

Not finding what you are looking for?
1992 Honda Accord Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...