Question about 1994 Pontiac Bonneville

1 Answer

How do I get to the blower motor on 93 bonneville

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 262 Answers

The blower motor is accessed from under the hood at the passenger side firewall

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower motor resistor heater


test blower with battery blowerblows good get a resister but beware of the blower switch we flick on and off ck sw

Sep 29, 2013 | 2002 Pontiac Bonneville

1 Answer

Can't get my blower motor out of my 1996 Bonneville


You will need to remove the engine's valve cover at the rear of engine to remove the blower motor, also replace the blower motor resistor while you are in there.

Oct 30, 2012 | 1996 Pontiac Bonneville SE CA Value

1 Answer

2005 pontiac bonneville blower motor


Did you check the blower fuse ??

Jul 08, 2012 | 2005 Pontiac Bonneville

1 Answer

Blower motor relay 93 bonneville ssei


The blower motor relay is located center rear of engine compartment below right maxi fuse block see no. 7 below - the fuse you're looking for is the A/C fuse 30amp it powers the blower motor relay/motor itself

zjlimited_1962.jpg

Sep 30, 2011 | 1993 Pontiac Bonneville

1 Answer

Wheres blower motor relay 98 pontiac bonneville


The relay for the blower motor is located on the fire wall almost beside the blower motor

Jan 22, 2011 | 1997 Pontiac Bonneville

1 Answer

1992 bonneville sse w/ac replaced blower motor +


You replaced the blower control module or the blower control panel on the dash? This has automatic temp control right?

Mar 31, 2010 | 1992 Pontiac Bonneville

1 Answer

Need location on blower motor resistor on 1994 pontiac bonneville


58f261e.jpg

Fig. 1: The blower motor and fan assembly is mounted in the heater and A/C module, and is accessible from the engine compartment

GM Bonneville/Eighty Eight/LeSabre 1986-1999
Blower Motor - REMOVAL & INSTALLATION
(see Figures 1 and 2)
  1. Disconnect the negative battery cable.
  2. If necessary, tag and disconnect the number 2, 4 and 6 spark plug wires from the ignition coil and move the coil out of the way.
  3. For 1993-99 vehicles, remove the nuts and cross brace bar.
  4. Detach the electrical connections from the blower motor.
  5. Disconnect the cooling tube from the blower motor.
  6. Unfasten the screws securing the blower motor to the blower module assembly.
  7. Remove the blower motor and fan assembly from the module.
  8. If necessary, unfasten the nut attaching the fan to the blower motor shaft, then pull the fan from the blower motor.
68515cf.jpg

Fig. 2: You can disassemble the fan from the motor by removing the retaining nut


To install:
  1. If the fan was removed from the motor, position the fan on the shaft, then install the retaining nut. Tighten the nut to 12 inch lbs. (1.4 Nm).
  2. Position the blower motor and fan assembly to the module, then install the retaining screws. Tighten to 5 inch lbs. (0.6 Nm).
  3. Connect the cooling tube to the blower motor.
  4. Attach the electrical connector to the blower motor.
  5. On 1993-98 vehicles, install the cross brace bar and retaining nuts. Tighten the nuts to 18 ft. lbs. (25 Nm).
  6. If removed, install the coil and connect the spark plug wires, as tagged during removal.
  7. Connect the negative battery cable.

Hope this helped (remember rated and comment this).

Mar 26, 2010 | 1994 Pontiac Bonneville

Not finding what you are looking for?
1994 Pontiac Bonneville Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...