Question about 2000 Ford F250 Super Duty Crew Cabs

1 Answer

On a 2000 ford super duty does the cab have to come off to remove cylinder head

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

No it does not. Your engine should either be the V8, V10 gasser or the 7.3 ltr diesel. All of these engines have timing and gears in the front side of the engine. The only ones that will need the cab removed or pulling the engine is the trucks equipped with the 6.0 liter engine as they have the gearing on the back side of the engine. These started in 2003 and went until 2007 I believe.

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Ford F-350 Super Duty 4 Dr Lariat Crew Cab wont shift into reverse


is it a standard trans. or an automatic
if standard it sounds like a broken or bent shifter fork
if auto. u have a broken reverse band

Feb 24, 2014 | 2000 Ford F350 Super Duty Super Cab

1 Answer

My Ford 2000 F-350 Power Point Fuse is good but I have no power at the outlet?


If you are sure the fuse for that circuit is good, I would check the socket for power and ground.

Sep 08, 2012 | 2000 Ford F350 Super Duty Super Cab

1 Answer

No running lights on trailer


how many pin connector do you have

Jul 16, 2012 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Location of the cylinder head temp sensor on a f250 2000


Did the problem come on suddenly or was some previous action or work done......

Nov 05, 2011 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Ware is the slave cylinder for a 2000 F250 superduty located at


Driver's side of the transmission bell housing. Follow the clutch master cylinder line down from the firewall.

Sep 04, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

#2 cylinder misfiring or skipping. Need the location of #2 cylinder for a 2003 Ford F250 Super Duty Triton 5.4 liter motor


Cylinder #2 will be the second cylinder from the front on the passenger side, and here is a diagram to help assist you.

ae98262.jpg

Jul 14, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Pluge came out when driving re tapped now it hesitates changed coill and allpluges v10


may have damaged valve train. check compression on affected cylinder.metal particals may have fallen into cylinder.usually to repair plug threads the head must be removed.

Nov 03, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Radio dose not work


According to your owners manual the Radio is Fuse #29 in he underhood Fuse/Power distreibution Box,

The power distribution box is
located in the engine compartment near the brake
master cylinder.

Feb 25, 2009 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Horn location


is it under the grill toot horn and locate

Jan 06, 2009 | 2000 Ford F350 Super Duty Super Cab

4 Answers

2000 ford f250 super duty 4x4 7.3L diesel oil leak


The HPOP (high pressure oil pump) is right under the filter housing. There are 2 lines that distribute the oil to the cylinder heads. The o-rings on those fittings go out. Kit is available from Ford or International. You will need a special wrench to get to the fittings though.

Jun 06, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...