Question about 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

Need to replace tail light bulb 2007 maxima - 2007 Nissan Maxima 3.5 Sl Sedan

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

You can get access to the light bulbs through the trunk. Go by the bad light and pull the carpet back. You will see the bolts/wingnuts there. Take them out and the light assembly should come out, and you can change the bulb from there.

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1991 Nissan maxima. All my lights,tail lights and brake lights work EXCEPT my left brake light. Changed the bulbs and still dont work. Can someone help?


Pull the bulb back out and look in the plug. They get corroded and the tabs will spread apart and/ or break off. Bend them back if they are there, replace it , if not.. If it looks good, you need to use an ohm meter and check continuity of the tabs to the wire. They usually break close to the plugs.

Dec 31, 2014 | 1991 Nissan Maxima

1 Answer

Change brake light . How to get at bulb ? Driver side brake light is burned out . I need to replace it . How do I get to the bulb ?


open trunk and pull back carpet around light. Remove 2 nuts, then the tail light needs to be pulled out because it is held in by a clip that can be snug at times. Once out you have access to all lights on that side.

Aug 14, 2010 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

Change rear light bulb


Pull the tail light assembly out.
Owner manual has instruction on how to remove tail light for bulb replacement.

Jul 16, 2010 | 2007 Audi A3

2 Answers

2000 Nissan Maxima. Headlights work but tail lights won't come on. How do you fix the wiring of this?I have changed the bulbs and nothing. The brake, reverse, and turn signal lights work, so the bulbs...


tail lights work on a different filament than the rest of the lights you mentioned, it is possible both bulbs are burned out for that filament. if not, check the fuses as the tail light circuit in some cars is on a seperate fuse. the remaining possibility could be bad socket contacts.

Nov 15, 2009 | 2000 Nissan Maxima

1 Answer

Replace rear tail light bulb on a 2005 nissan maxima


Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Oct 04, 2009 | 2005 Nissan Maxima

1 Answer

Replaced tail light fuse, which turned on tail


most likely you have a short in one of the bulb connectors or the hot wire from them is pinched on medal somewhere. Or you have water intrusion shorting one out. Inspect the bulbs. Leave both bulbs out. install fuse. Press brake pedal several times and hold. Inspect fuse. if its blown its the pedal switch that's bad or a pinched wire from there. If good put one bulb in. Test again,, then the next bulb. If you see something obvious fix it.

Jul 18, 2009 | 2004 Nissan Maxima

1 Answer

How do you change out the brake light bulb on a 2007 Maxima


Open the trunk, on the inner part of the actual trunk door, locate the side of where you want to replace the brake light bulb, and probably have to unscrew the mount with a screwdriver and then the bulb will be easily removed.

Jul 15, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

How do change the tail light on a 2007 nissan maxima sedan


I think it is the same as a '04 maxima. Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jun 30, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

How to replace a tail light bulb in 2005 nissan maxima


Pop The Trunk And Inside The Trunk, Immediately Behind Where The Light Is There Will Be A Panel Of Carpeting Remove It. Then You'll Have Access To The Rear Of The Light Find The Burnt Bulb Grasp And Twist As You pull. Then Pull The Bulb From The Harness And Replace.

Jan 18, 2009 | 2005 Nissan Maxima

1 Answer

Need to change the stop light for 05 nissan maxima.


Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jan 09, 2009 | 2004 Nissan Maxima

Not finding what you are looking for?
2007 Nissan Maxima 3.5 Sl Sedan Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...