Question about 1994 Toyota Previa

1 Answer

WHERE TO GET PARTS AS-PISTON ENGINE Gaskets, timing belt.??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toyota Master
  • 752 Answers

Any parts place should have it do you have autozone,pepboys,napa,advance auto just to name a few should have ur parts or they will tell you where to get them

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will not start


Terry, May be a timing issue, you will have to check the timing.

Apr 08, 2016 | Cars & Trucks

1 Answer

I had a broken timing belt and replaced the heads, valve stems, seals, gaskets and springs. how do I time the piston to valve clearance to prevent kissing.


you don't change the piston to valve clearance
the valve timing does that as it opens and closes the valves so that the piston doesn't hit it
all the details for timing the valves are in the workshop manual as you have not bothered to include the make, model ,year and engine type in your post

Mar 14, 2016 | Cars & Trucks

1 Answer

Car hesitates and backfires at lower speeds?


check the firing order of the spark plugs and make sure the number 1 piston is on top dead center and start from that check the marks on the crank shaft pulley if donot match your timing belt(or chain) position is no good and double check all pushing rods.

Sep 22, 2012 | 1998 Ford Escort

1 Answer

Yeah i have a 2002 lincoln ls 6 cylinder and recently the engine makes a wied screeching sound and the engine light keeps blinking. i was changing the sparkplugs and found lots of oil in the sockets my dad...


By your description it seems as though everything may be related. the screeching is likely oil on the drive belt and the engine light may be because the belt is slipping. The oil deposits more than likely will be related to the gaskets....if it were failed piston rings you would see blue smoke out of the exhaust at the very least, so don't worry too much there

Feb 17, 2011 | Lincoln LS Cars & Trucks

2 Answers

I own a 2000 Nissan Frontier crew cab v6 - I was wondering what would happen if my timing belt broke - I just turned 107000 mi. - would the motor lock everyting up - or just the belt broke - also I...


If your timing belt breaks some of the valves will stay open and the pistons will come up and either break the valve or could put a hole in a piston. This is very costly. The rattle could be the belt tensioner

Jun 28, 2010 | 2000 Nissan Frontier

1 Answer

I have a 1998 sebring convertible 2.5L V6 that i changed the head gaskets and timing belt on. after putting the car back together i cannot get it to turn over. i did get it to crank once and than shut it...


Always turn an engine over by hand first man.turn it 2 revolutions of the crank and see if it turns freely.If tour starter will not turn the engine then tou may not have got your valve timing right and have valve to piston contact[not good] Check your valve timing again [with the plugs out turn over your engine by hand.

Mar 01, 2010 | Chrysler Sebring Cars & Trucks

1 Answer

Engine knocking


Hi,
Good news is - I don't think you need a new engine.

As there are many moving parts that could create a knocking sound, it usually needs careful inspection to identify where it is from.
I will give a list of some of the causes and remedies. Yours will probably be one of them, but unless I was there - it could be any.

Loose exhaust component (causes rattles and thumps) - replace parts or joints.
Loose Engine mounts - Engine will move about a lot more than normal - Replacement of mounts.
Fraying Belts - causes continual ticking or slapping - Replace belts and check tension.
Timing is off - bad running, lack of power, pre ignition or knocking at low revs. Check timing belt - Replace, Tune engine.
Cracked valve - slight misfire worse at low revs - Replacement valves.
Clutch Problems - Broken spring or loose bolt - Check clutch plate - replace clutch plates.
Older engines - often accompanying smoke -
Broken Piston ring - continual ticking or occasional misfire - Replace Piston rings
Worn Piston bearings - Piston Slap - Replacement of all piston bearings.

Transmission Problems (only heard when in gear or with clutch out) - Broken gear teeth or worn bearings - Replacement of Transmission or rebuild.

Some of these remedies require engine removal and strip down, others are a simpler fix.

Dec 26, 2008 | 1990 Cadillac Fleetwood

1 Answer

Timming belt broke


Go to your local NAPA, Carquest, Advance Auto Parts, O'Reilly's, Checkers, AutoZone, or whoever you deal with, and they can provide you with a timing mark index for your application. If they tell you they can't, it's because they don't want to. You may also find that this is an interference engine, and that a valve job may be in order. The piston and the valves occupy the same space, but at different times. When a timing belt breaks on an interference engine, the piston and the valves may then try to occupy the same space at the same time. Piston wins, valves lose. In most cases anyway.

Nov 10, 2008 | 1989 Honda CRX

1 Answer

Oil pump


You're going to need gaskets for sure, but you're going to be better off spending a lot more on parts as well. To access the oil pump, you have to disassemble a LOT of the engine, as it's driven off the crankshaft and is behind the timing belt sprocket on the crank, which is behind your main belt pulley at the bottom center of the engine. All of that (including the timing belt) must be removed to change the oil pump. You are better off buying the timing belt service components (timing belt, accessory belt(s), timing tensioner, water pump, thermostat) and installing them at the same time to save yourself from paying the labor to duplicate the effort later on - it's all coming apart anyway, so you may as well install new gear now and not have to worry about it in the future.

Aug 26, 2008 | 1997 Mercury Tracer

2 Answers

Need to know what parts should be replaced when changing the timming belt on a 2001 toyota camery 4cyl


Hi. Since you took the chance of opening the engine to replace the timing belt, you might replace the seals and gaskets for the head, cover, and crankcase, including the valve seals. in this way you will add brand new seals, minimizing or eliminating any leak problems. Also, try to use shur-tak spray. This one hold the gaskets in place while putting the engine back together and adds a protective layer to them as well. Ask for it at any parts store.

Aug 12, 2008 | 2007 Toyota Camry

Not finding what you are looking for?
1994 Toyota Previa Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...