Question about 2000 Chevrolet Corvette

1 Answer

Back up lights don't work. I changed relay in fuse box and tested reverse switch on transmission.What should be done next. 2000 corvette.

Posted by on

  • bretchesjack Feb 06, 2010

    lights come on when unlocking dorrs with key fob

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

Check the light bulbs.

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No reverse light, all fuse good. reverse Switch?


It's not that simple anymore . The transmission range sensor switch is what they have now . This range sensor informes the PCM - engine computer what gear the vehicle is in. When you put the gear selector into reverse B+ voltage from the range sensor to the PCM tells the PCM reverse has been selected , the PCM then will energize the reverse lamp relay (located in the under hood fuse/relay box) there by turning on the reverse lamps . There are two fuse's in the under hood fuse/relay box . F27 10amp. & F35 10amp.

Aug 11, 2017 | 2010 Ford Escape XLT

2 Answers

2004 f 150 reverse lights don't come one


First of all, go to the central junction box (CJB) and check 10A fuse 14 which feeds power to the DTR sensor. Next, check 20A fuse 10 which feeeds power to the reverse relay. Check the reversing lamps for burnout. Start the engine and place the selector in R and check the reversing lamps. If they do not turn on, either the DTR or the reversing relay is defective

Oct 17, 2012 | 2004 Ford F150

1 Answer

2004 Tacoma - tail lights don't work but brake lights and reverse lights do work. Bulbs look ok. fuse looks okay. Wiring looks ok. Could it be a relay or is there something else to check? Than


try cheaking the light switch its self may be faulty not normally a relay for but it shold tell you on fuse box which relay runs light ign ect

Sep 21, 2012 | 2007 Toyota Tacoma

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

1 Answer

I don't have any reverse lights on my 2000 toyota avalon


if the bulbs are good, then check the signal from the transmission range switch.you can check that at the bulb socket with the park brake set, the key on/engine off and put trans in reverse. use a test light and check power in the light socket. no power indicates bad fuse, bad wiring, or bad range switch.

Jun 14, 2012 | Toyota Avalon Cars & Trucks

1 Answer

My bmw 2002 z3 reverse lights wont come on. Its not the bulbs. What could it be?


There is nominally a fuse, relay, and a switch associated with your reverse lights. Possible repair listed from 'easy to hard' by escalation

easy:
disconnect your negative battery cable, check the fuse block. It should be a 20A fuse(#F203). Some models use a 10A fuse(#F26). Replace as needed
Reconnect the battery, test.
if that doesn't work...

moderate.
have already checked the fuse, check to see if you have a "reversing light relay" (K6325) (My 2001 z3 does not) If present, disconnect negative battery cable and replace the entire relay. It is not worth trying to refurbish them.
Reconnect the battery, test.
if that doesn't work...

hard...
If both the fuse and relay are in good order, it is likely a fault in your wiring or the "reversing light switch"(S8511)

On the manual transmission:
The switch is located on the left of the gertrag transmission
The switch is located on the right of the ZF transmission

unscrew the switch from the transmission
install the new switch, tighten to 15 ft-lbs torque

On the automatic transmission:
If replacing the fuse and relay did not work there is an issue with your transmission range switch, various shift solenoids, shift linkage, etc. I highly recommend a dealer or qualified facility's examination.


I hope this helped!

Mar 17, 2010 | 2002 BMW Z3

1 Answer

Back up lights on 2000 corvette won't work.


Go to the Brake Light Switch located on the rear side of the Brake Pedal Arm.
Test this Switch by pushing the plunger in and check to see if you have Brake Lights. If you do have brake lights then the switch is good. Most of these plungers can be adjusted out or in to make a good connection. with the Brake Pedal Arm to activate the brakes.
If you do not have brake lights when you depress the plunger:
Remove the switch from the support arm.
Disconnect the electrical connection.
Check for Voltage.
If you have Voltage: replace the Switch.
If you do not have Voltage then recheck the Fuses and Relays.
Let me know if this worked or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 06, 2010 | 2000 Chevrolet Corvette

1 Answer

No reverse lights on 2000 grand am or shift out of park lock


try disconnecting the plug off the reverse light switch (on the transmission) and bridging out the 2 terminals and then see if your revers lights work if they do replace the switch

Oct 01, 2009 | 2005 Pontiac Grand Am

2 Answers

My corvette doesnt want to start because theres no power going to the fuel pump fuse.


I am looking at alldata , the schematics for the fuel system. I see a fuse in the fuse block(10 amp) that comes from the fuel pump relay to the pump. I see a fuseable link (link H)that goes through a oil pressure sending unit. I would get a test light and test the oil pressure sending unit, the inline fuseable link and the relay. If still no power check the connection at the pump and then work backwards testing the harness.

May 27, 2009 | 1985 Chevrolet Corvette

Not finding what you are looking for?
2000 Chevrolet Corvette Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...