Question about 1990 Toyota Celica

3 Answers

I have a 90 celoca gt s and the clutch kind of loses pressure inbetween gears and have to pull the pedal up and it seems fine while not driving.itcomes back and has spring but not much. i bled the clutch and that didnt realy seem to help??

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

90 nx celica wont pump fuel

Posted on Apr 17, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 200 Answers

The pedal returns to normal position by spring tension, not fluid. You can try lubricating the pivot points. Sounds like it's binding.

Posted on Feb 06, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Replace the clutch master and slave cylinders.

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine revs but no acceleration


Clutch plate and pressure plate seem to be too weak to pull the car. Or one of the CV joints is detached from the gear box. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

May 22, 2013 | Honda Civic Cars & Trucks

2 Answers

My clutch won't engage 1997 Honda civic


Clutch plate and pressure plate seem to be too weak to pull the car. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

Apr 06, 2013 | 1997 Honda Civic

1 Answer

Yo I have a 1990 honda prelude si ,I have an issue with clutch pedal, my clutch pedal seems to stick when depressed it still has good pump pressure but I have to lift it up. Now I live in Idaho and it


The pedal return spring should be checked. Also the pedal bushings where pedal connects to the pedal support up under dash may be worn and not allowing free pedal movement. Work the pedal with your hand and watch the upper mounting of the pedal to see if you can see the problem. I would expect the bushings need replaced. You might try a little light oil where the clutch pedal attaches.

Jan 15, 2013 | 2000 Honda Prelude

1 Answer

1996 vw passat clutch fluid


The clutch uses the brake fluid to work; check the brake fluid level.

Jan 06, 2013 | 1996 Volkswagen Passat

1 Answer

99 Camry CE Clutch pedal seems to work well, but when in gear, acceleration is very poor--esp. in lower gears. When I apply pressure to the acceleration pedal, the rpm's go up (as when you're in neutral...


Sounds like you need a new clutch... I doubt the minor adjusting available will help.

The pedal will work fine.. if fully out.. is there a little play at the "top".. you know where you can press gently on the pedal but nothing is engaging.. while driving.. if so.. the pedal is probably adjusted just fine..

The clutch material is either worn .. or the pressure plate/diaphram is weak or has a broken spring.. either way it needs attention..if you replace or have the clutch and pressure plate replaced.. have them resurface the flywheel and inspect or replace the pilot bearing too.. then check the master and slave cylinders while they are at it.. no sense in dropping that kind of money and not have those few things considered.

Parts/kits are probably in the 150 - 200 dollar range..Centerforce makes a good kit.. I wouldn't even hazard a guess on labor.

Best of luck to you!

Apr 17, 2011 | Toyota Camry Cars & Trucks

1 Answer

1997 Probe Gt, 5 speed, 2.5 L V-6; 77,750 miles: replaced clutch master cylinder 11/15/2010. Clutch free play okay, pressure to push clutch pedal down- okay (these conditions apply to vehicle after...


THe problem can only really be with the clutch master cylinder. What you describe sounds like the master cylinder is not relieving pressure and this is building up in the salve cylinder, applying pressure to the pressure place and causing the clutch to slip. Can you make the problem go away even temporarily, if you open the bleed screw on the slave cylinder? You say that the free play is correct, but is the master cylinder returning fully to its released position?

Jan 26, 2011 | Ford Probe Cars & Trucks

1 Answer

The clutch pedal at times gets soft and gear shift is hard I have to turn off the truck pump the pedal for a while, some times when it is in 4th gear is hard to gear down


I have a 92 toyota camry and had to have my clutch replaced & the switch a year ago I already know it's all hydraulic but now the clutch pedal feels spongy easy to push in I have to wait till the car warms up & the rpm's drop even in 90 degree weather & then it's still hard to shift into gear once I'm able to drive it around for a little while it seems to work fine, I called Firestone who done the clutch they said it COULD be the clutch master cylinder how could I be sure or what can I check to be sure of what it could be before I take my car anywhere to be fixed.

Jan 25, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

I have a 89 toyota pickup 4 speed. When I'm stopped at a stop light, and let out on the clutch it seems like it has lost pressure. When I'm shifting down the road it shifts fine. I checked the fluid and it...


this sounds like the clutch slave is goin out, this unit is on the outside of the transmission. Possibly losing pressure!! Your transmission does not use transmission fluid, but instead gear oil. Have the following checked:
1. Clutch Slave (possibly worn)-this will cause soft or hard clutch pedal feel, slipping clutch, unintended clutch release, hard gear engagement, no/insufficient clutch movement.

*2. Clutch pedal Mounting Plate (possibly cracked)-this will cause improper gear engagement, hard gear engagement, soft pedal feel, insufficient clutch movement.

*this plate is located above the clutch pedal itself, apply pressure on the pedal with one hand while inspecting the plate for fatigue cracks(use a bright flashlight). This is very common on these models. This problem will eventually get worst and most mechanics never figure this out.

more questions email me at gimconsulting@ymail.com!!

Mar 15, 2010 | 1989 Toyota Pickup SR5

1 Answer

I have a 90 jeep wrangler, 4cyl and 5 speed transmission, when i accelerate in any of the gears, it makes a popping noise and the second it makes that noise it seems like the jeep stops pulling, if you...


It sounds like it is the throw out bearing. From your description of the vehicle not pulling its weight, it is going to need a clutch. The throw out bearing will come in most clutch kits, so when you replace the clutch you can replace the throw out bearing, pressure plate, and pilot bushing.

Oct 18, 2009 | 1990 Jeep Wrangler

1 Answer

Clutch change


hi it seems your clutch is losing pressure,it works like a shock, known as a hydrolic clutch, i recommend you change it asap.

Feb 05, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
1990 Toyota Celica Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...