Question about 1999 Ford Expedition

1 Answer

I need to change heater core i need diagram - 1999 Ford Expedition

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

No you dont drain coolant disconnect the two heater hoses headed to the firewall . under the dash you have to disconnect the black casing cover . take your time on doing this . if you think you cant take to a local garage

Posted on Feb 06, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 611 Answers

SOURCE: heater core

go to the libruary n get a service manual

Posted on Jun 13, 2008

emissionwiz
  • 75822 Answers

SOURCE: heater core replacement

This is a really easy job, disconnect the heater hoses at the firewall, go inside the truck on the passenger side there is a plastic panel/cover over the core, 6 bolts/screws I think, remove the cover pull the core, tops 1 hour, as job at work I did them in 20 minutes.

Posted on Oct 15, 2008

  • 337 Answers

SOURCE: heater core

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800a8c4e

Posted on Dec 13, 2008

  • 3 Answers

SOURCE: need a diagram or instructions on how to replace a heater core 97

buy a haynes repair manual for your vehicle

Posted on Mar 12, 2009

  • 93 Answers

SOURCE: how to change heater core in 92 chevy pick up

unfortunately the fastest easiest way is usualy to remove the entire dash and its about a 2 day job

Posted on Feb 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a diagram for replacing heater core on 1969 f-250 defrost heater


You have an easy one. Follow the heater hose to the firewall. Remove them. remove the bolts holding the core in place and pull out the core. Reinstall. Newer ones, you have to remove the entire dash.

Nov 07, 2015 | Cars & Trucks

1 Answer

I need a diagram of where the heater core is in the engine and the easiest way to replace the heater core.


Heater core replacement is delicate and it is very easy to damage hard to get parts, including the core itself. This job may be best for a shop to handle. The heater core is located in the heater box, follow the heater hoses from the engine to the passenger side firewall area...

Mar 02, 2011 | Geo Prizm Cars & Trucks

1 Answer

Heat dont work fine suppost to be heater core or cooling sensor i need diagram for the heater core so i can change it


from autozone.com:

1992-96 Models

See Figures 1, 2 and 3

  1. Disconnect the negative battery cable.
  2. From under the dash, remove the heater protector from the front of the A/C and heater unit. It is attached by two clips.


jturcotte_299.gif

Fig. Fig. 1: The heater protector is a panel attached to the front of the unit

  1. Unscrew and unclasp the heater core. Disconnect the heater pipes.
jturcotte_300.gif

Fig. Fig. 2: There are three screws holding the pipe clamps

  1. Pull the core out of the vehicle.





jturcotte_301.gif

Fig. Fig. 3: Slide the core out in this direction from the unit


To install:

  1. Place the core into the A/C and heater unit.
  2. Connect the heater pipes.
  3. Install the 3 clamps and screws to secure the unit.
  4. Install the heater protector.

9. Remove radiator cap, start car, refill system, allow car to reach normal temp with thermostat open and coolant flowing in radiator. open any bleed ports on engine to release trapped air. top off radiator and close cap.

Nov 26, 2010 | 1994 Toyota Camry

3 Answers

Heater not warming up


Check the fuses. My heater went out so I changed the fuses and it works perfectly now!

Feb 13, 2010 | 1994 Mercury Sable

1 Answer

Need a heater core diagram for a 91 mazda b2200


The only thing to do is get a diagram from the MAZDA dealer parts dept. "A few parts fell out" is way to vague to help you.

Dec 30, 2009 | 1991 Mazda B-Series

2 Answers

How to change heater core in 2001 chevrolet blazer


Hi:
I have changed out a heater core on a Blazer like yours and while it isn't extremely difficult, it is quite a job, as you need to remove the dash to do so.

If you need some guidance, I would suggest that you spend about $20 and get a subscription to :
www.alldatadiy.com

It helped me on all of the cars that I had, and has step by step instructions, as well as printable diagrams and pictures.

Dec 18, 2009 | 2000 Chevrolet Blazer

1 Answer

How do i change the haeter core?


I believe all your major auto parts stores have web sites with instructions and diagrams to help you with your project.

May 03, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

Heater Core Replacement for 1986 Buick Electra Park Ave


there is no easy way to change out a heater core...you have to take the bottom part of the dash loose and that takes some doing. once you get the bottom of the dash apart you will see the heater core.then you have to go under the hood and unhook both water lines that run to it, you should then be able to pull the heater core out and install the new one

Feb 09, 2009 | 1986 Buick Electra

3 Answers

Heater core metal line to rear heat


need to change cooling lines for 2003 kia sedona,need diagrams

Dec 30, 2008 | 2003 Kia Sedona

1 Answer

Heater core


The automotive repair manuels that you can buy at the major part stores such as Autozone, Advance or ORiley's do a good job of describing how the heater core is removed. Most heater cores come out from under the dash, while a rare few are removed from the firewall.

One wonders why you are changing the heater core. Are you getting steam on the inside of your windshield? Usually the best indication your heater core is leaking, or are you getting no heat? In which case it make be duct doors.

Bill

Oct 13, 2008 | 1998 Dodge Stratus

Not finding what you are looking for?
1999 Ford Expedition Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...