Question about 2003 Dodge Intrepid

1 Answer

How do you replace head light bulbs in a 2003 dodge intrepid

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

On each headlamp, you need to remove the screws holding the headlamp the the car (2 screws per headlamp)
Then pull the lamp out and change the bulbs.
Dont touch the new bulbs with your hands, use the plastic bag they came in (but remove the bag after install!!!)

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace left rear turn signal on dodge intrepid?


Open trunk, pull carpet back (may have to undo some fasteners). The tail light assembly should be visible. Unscrew the plastic fasteners to the tail light. The whole tail light assembly should now be able to be removed from the outside of the car. You will see the individual bulb sockets where the wires lead to the bulbs. Twist to remove. Take the burned out bulb to the car parts store. Reverse these steps to reassemble.

Oct 24, 2014 | 2000 Dodge Intrepid

1 Answer

My water outlet cap popped off and its leaking water and the water that stays boils. Should i replace my water pump 2003 dodge intrepid se 2.7


replace the cap--is the radiator damaged? No reason to replace the water pump. Boiling is caused by leak, faulty thermostat, clogged radiator, or head gasket.

Aug 22, 2010 | 2003 Dodge Intrepid

1 Answer

Axcle shaft 2003 dodge intrepid


remove tire/wheel and remove axle nut!! i thinks its a 32 mm socket and then take the upper strut bolts out of the knuckle theres 2 bolts 18mm if not there 15 mm bolt heads and tilt the knuckle outwards then drive the axle back with a hammer til it clears then take a flat tip bar and pry the axle out of the tranny

Jan 21, 2010 | 2003 Dodge Intrepid

1 Answer

How to change out a head light bulb in 1999 Dodge intrepid


remove the two bolts that hold the whole headlight assembly in and pull it out and change your bulbs.

Dec 28, 2009 | 1999 Dodge Intrepid

1 Answer

How do i change the brake light on 2002 dodge intrepid


pull the carpet out a little where the light is or plastic cover ... twist the light fixture left and pull out the bulb .....when replacing the bulb don't touch the glass part of the bulb the natural oil from your fingers could damage the new light.

Oct 25, 2009 | 2002 Dodge Intrepid

1 Answer

How do you adjust head lights on a1996 dodge intrepid after replacing both light assembly. Car was hit in the front & had to replace both lights on the car, lights are used from junk yard.


You should have two plastic nuts on each headlamp assembly, one will be for your high beams and one will be for your low beams.

The nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail (might see holes in your rail above the headlamp unit where the screws are hidden)

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Sep 21, 2009 | 1996 Dodge Intrepid

1 Answer

94 dodge intrepid no low-beams


It could be a dimmer switch. Although make sure both Head light bulbs aren't burnt out. Check for power and ground at the low beam headlight connectors.

Feb 26, 2009 | 1994 Dodge Intrepid

1 Answer

I have a 1997 dodge intrepid my brake lights are not working but the tail lights are so which bulb is the brake light , the one one on right or left.


first of all do you have a third brake light and does it work???? you could have a bad brake light switch turn on the head lights check all rear lamps then put on the 4 way flashers and check the bulbs the ones that dont light should be the brake lights or replace the tail lights they should be double fillament

Jan 29, 2009 | 1997 Dodge Intrepid

Not finding what you are looking for?
2003 Dodge Intrepid Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...