Question about 1989 Dodge Ram 50

1 Answer

Do I have to remove the timing belt to change the water pump?

Posted by on

  • 1 more comment 
  • russbfrye Feb 06, 2010

    4 cyl, 2.0L manual 2WD, water pump quit today and wasn't sure if I would have to deal with the timing belt to change.

  • russbfrye Feb 06, 2010

    4 cyl, 2.0L manual 2WD, water pump quit today and wasn't sure if I would have to deal with the timing belt to change.

  • yadayada
    yadayada May 11, 2010

    what engine do u have

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,164 Answers

The water pump is not driven off the timing belt, so no u just change the pump and leave the belt alone. here is the part number and price for the pump.

CARDONE SELECT Part # 5533124 {New Pump; Includes Gasket}
$29.79 Source www.rockauto.com


Do I have to remove the timing belt to change the - da2fd72.jpg

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ford escort Zx2 2000 and my water pump is leaking bad I have lost pressure when I hit my gas pedal inorder to replace my gas pump do I have to replace my timing belt as well?


If the water pump is leaking, it needs replacement. Timing belt is replaced at certain mileage intervals . You can have the belt inspected by a garage. The timing belt does not have to be changed to replace the water pump. If a timing belt is changed, then it is standard procedure to change the water pump, since the water pump is removed when replacing the timing belt.

Mar 22, 2014 | Cars & Trucks

1 Answer

Need to change water pump in 99 plymouth voyager 3.0 liter


  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.

To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.

  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs.
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50 / 50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.

Oct 16, 2013 | 1997 Plymouth Voyager

2 Answers

Need to no after how many miles we have to change the timing belt


It is recommended that a timing belt should be change every 100,000km. Honda's and Acura's especially. Whenever the water pump is changed, it is also wise to change the timing belt too as it is all in one spot, and VS. In some cars, [Acura's], when the timing belt breaks, it also can tear your valves in your engine apart, so I hope that this answers your question

Jan 04, 2013 | Cars & Trucks

1 Answer

1994 accura integra how do you replace water pump without replacing timing belt


Hi:
Sorry, but the timing belt must come off to remove the water pump, because that is what spins the water pump.

Common sense says to replace the timing belt and tensioner when the water pump gets changed, and change the waterpump when you change the timing belt...

Apr 30, 2010 | 1994 Acura Integra

1 Answer

How do I change a water pump on a 2004 kia sorento?


Kia Sorento 2003-05
Water Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

  9. dc45c19.jpg

    Fig. Water pump and timing belt assembly-exploded view

To install:

1016213.jpg

Fig. Water pump bolt locations
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. Refill the coolant.
  7. Run the engine and check for leaks.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

To install:


e9be8c3.jpg

Fig. Water pump bolt locations

596080e.jpg

Fig. Water pump O-ring installation
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. To adjust the drive belt tension, hang the belt on the pulley of the tensioner and install the tensioner.
    NOTE If the tensioner is already installed, loosen its mounting bolts to allow belt installation
  7. Install the drive belt.
  8. Adjust the belt tension to specification by turning the adjusting bolt clockwise or counterclockwise.
  9. Air conditioning belt tension should be 0.28-0.039 inch. Alternator belt tension should be 0.39-0.051 inch. Power steering belt tension should be 0.31-0.051 inch.
  10. Torque the tensioner assembly bolt to 33-36 ft. lbs. (45-50 Nm).
  11. Refill the coolant.
  12. Run the engine and check for leaks.

TY for using Fixya; remember comment and rated this.

Apr 01, 2010 | 2004 Kia Sorento

3 Answers

91 carolla water pump


No. You don't have to remove the timing belt to change the water pump. Check out the autozone.com website and register. It doesn't cost anything and you will have access to a repair manual for the vehicle. The steps for replacing the water pump can be found there. ( I checked) Hope this helps and best wishes.

Aug 18, 2009 | 1991 Toyota Corolla

2 Answers

WHERE IS THE WATER PUMP LOCATED ON A 1998 PLYMOUTH GRAND VOYAGER


Here are the steps required to change the water pump on the 3.0L engine.

  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
  3. Remove the drive belts. Remove the timing belt covers and the timing belt.
  4. Remove the water pump mounting bolts.
  5. Separate the water pump from the water inlet pipe and remove the water pump.
  6. Inspect the water pump and replace as necessary.
To install:
  1. Clean all gasket and O-ring surfaces on the water pump and water pipe inlet tube.
  2. Wet a new O-ring with water and install it on the water inlet pipe.
  3. Install a new gasket on the water pump.
  1. Install the pump inlet opening over the water pipe and press until the pipe is completely inserted into the pump housing.
  2. Install the water pump-to-block mounting bolts and tighten to 20 ft. lbs. (27 Nm).
  3. Install the timing belt and timing belt covers. Install and adjust the drive belts.
  4. Reconnect the negative battery cable. Fill the cooling system to the proper level with a 50/50 mixture of clean, ethylene glycol antifreeze and water.
  5. Run the engine and check for leaks. Top off the coolant level, if necessary.
34bef4a.jpg

Jan 12, 2009 | 1998 Plymouth Grand Voyager

1 Answer

1995 Plymoth Voyager


The water pump bolts directly to the engine block, using a gasket for pump-to-block sealing, The water pump is driven by the timing belt and is serviced as a unit.Disconnect battery ground cable.Remove crankshaft drive pulleys and torsional damper,and Right Engine Mount & Bracket.Place a jack under engine to support and slightly raise engine, then remove engine mount bracket.
Remove timing belt cover, then mark belt running direction for reinstallation.
Loosen timing belt tensioner, then remove belt and crankshaft sprocket flange shield.
Drain cooling system.
Remove water pump mounting bolts.
Separate water pump from water inlet pipe, then remove water pump.
Reverse procedure to install, noting the following:
Use a new O-ring on water inlet pipe.
Torque water pump mounting bolts to 27 Nm (20 ft. lbs.).

Dec 24, 2008 | 1995 Plymouth Voyager

1 Answer

How to change the water pump on a ford escort 1.3gle 1986 model


  1. Let me know if you cannot see diagrams(happens sometimes) or if you have any questions
Just to make sure. I assume that you are seeing coolant leakage from around the water pump assembly.

  1. Disconnect the negative battery cable.
  2. Place fender covers on the aprons.
  3. Drain the cooling system.
  4. Remove the accessory drive belts.
  5. Remove the timing belt cover.
  6. Use a wrench on the crankshaft pulley to rotate the engine so No. 1 piston is on TDC of the compression stroke.
Turn the engine only in the direction of normal rotation. Backward rotation will cause the timing belt to slip or lose teeth.
  1. Loosen the belt tensioner attaching bolts, then secure the tensioner over as far as possible.
  2. Pull the belt from the camshaft, tensioner, and water pump sprocket. Do not remove it from, or allow it to change its position on, the crankshaft sprocket.
WARNINGDo not rotate the engine with the timing belt removed or serious engine damage could occur. The 1.3L and 1.6L engines are of the "interference type," meaning it is possible for the valves to contact the pistons if their reciprocation is not carefully timed and controlled. An engine allowed to spin freely without the timing belt could bend valves and scuff pistons almost instantly.
  1. Remove the camshaft sprocket.
  2. Remove the rear timing cover stud.
  3. Remove the heater return tube hose connection at the water pump inlet tube.
  4. Remove the water pump inlet tube fasteners and the inlet tube and gasket.
  5. Unfasten the water pump to the cylinder block bolts and remove the water pump and its gasket.
0900c1528008b2ee.jpgFig. 1: If equipped, remove the cover from the water pump 0900c1528008b2ef.jpgFig. 2: Unfasten and remove the heater return tube hose connection at the water pump inlet tube nuts from the studs 0900c1528008b2f0.jpgFig. 3: Location of the water pump mounting bolts-1.9L engine 0900c1528008b2f1.jpgFig. 4: After unfastening the water pump retaining bolts, remove the water pump from the engine compartment 0900c1528008b2f2.jpgFig. 5: If you are reusing the old water pump, remove the gasket ... 0900c1528008b2f3.jpgFig. 6: ... and carefully clean both of the water pump mating surfaces using a gasket scraperTo install:
  1. Make sure the mating surfaces on the pump and the block are clean.
  2. Using a new gasket and sealer, install the water pump. Tighten the bolts to 30-40 ft. lbs. (40-55 Nm) on 1981-87 models, or to 15-22 ft. lbs. (20-30 Nm) on 1988-90 models. Make sure the pump impeller is able to turn freely.
  3. Install the water pump inlet tube and the inlet tube gasket and fasteners.
  4. Install the rear timing cover stud. Install the heater return tube hose connection at the water pump inlet tube.
  5. Install the camshaft sprocket.
  6. Install the belt from the camshaft, timing belt tensioner, and water pump sprocket.
0900c1528008b2f4.jpgFig. 7: Radiator hose-to- engine mounted water pump inlet tube-gasoline engines 0900c1528008b2f5.jpgFig. 8: Exploded view of common water pump inlet tube and related fasteners-non-A/C type 0900c1528008b2f6.jpgFig. 9: Exploded view of water pump and related components-1988-90 1.9L engineDo not rotate the engine with the timing belt removed.
  1. Tighten the belt tensioner attaching bolts, then secure the tensioner over as far as possible.
  2. Install the timing belt cover.
  3. Install the accessory drive belts.
  4. Refill the cooling system and reconnect the negative battery cable.

Nov 15, 2008 | 1983 Ford Escort Gt

1 Answer

HOW TO CHANGE THE WATER PUMP


There is no easy way, the water pump is driven off the camshaft belt, you must pull the timing cover to remove the belt, line up all the timing marks before you remove the belt, don't reuse the belt.

Oct 22, 2008 | 1990 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...