Question about 1995 Honda Accord

1 Answer

How to install new ingnition wires on a 1995 Honda Accord with a 2.2 liter 4- cylinder engine Wires were detached from the distributor. I need to the know the sequence for the installation of the new wires. Which wire to which spark plug. If you have a picture of the sequence it would be great. Thanks, Jim

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 538 Answers

The firing order on most inline 4's is 1-3-4-2. If number one is marked on the cap then all you have to do is take the cap off and have someone crank the engine with the starter to see which way the rotor turns.
If the cap is not marked remove number spark plug and hold your finger over the hole, while some one bumps the starter. When you feel compression (air blow out of the hole) stop, look at which terminal on the distributor cap the rotor is pointing to, that wire goes to number one. Number one is the one closest to the belt end of the engine. Good luck!

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

That helps but where is the number 1 cylinder on the distributor cap 1994 honda accord ex


From ZJ limited: "1.6L Engines Firing order: 1-3-4-2 Distributor rotation: Clockwise.

cdd80c6.gif
"

Apr 12, 2015 | 1994 Honda Accord

2 Answers

1993 honda accord lx new coil no spark


The 1993 Honda Accord LX came with a 2.2 Liter Inline 4 cylinder engine. It gets 125 horsepower. ------------------------------------------------------------------------------
Renault CAN Clip

Apr 08, 2013 | 1993 Honda Accord

1 Answer

I have a 98 honda accord 5 spd it has a 4cyl motor vtech i just need to know how to fix a miss fire in cylinder 2 and wich one is cylinder 2


Cylinder #2 is the the second spark plug counting from the right to left.
EX.Below are spark plug on engine
engine
-------------------------------
' (oil cap) '
' (4) (3) (2) (1) '
'_________________'

Your misfire can be cause by couple of things but the cheapest way that you can try to fix your car is to do a tune up by replacing:
1)all spark plugs
2)do a oil change
3)spark plug wires
3)distributor cap and rotor

note misfire can be cause by:
1.bad gas
2.spark plug and/or wire
3.distributor cap and/or rotor
4.valve adjustment
5.injector
6.off timing
7.ECM
8.bad wiring(power, ground or feed line)

Jul 08, 2011 | 1998 Honda Accord

1 Answer

Lost firing order of sparkplug wires 94 honda accord


For the 1994 Honda Accord 2.2L SOHC In-Line 4-Cylinder:
Firing Order:
1 - 3 - 4 - 2
Cylinders:
.........(back)..........
|...4....3....2....1...|
.........(front)
Distributor:
......4
3..........2
......1.......\\\\\\
........\\\\\\\\\

Let me know if this helped. Thanks for using FixYa.com!


Jul 28, 2010 | 1994 Honda Accord

2 Answers

What is the spark plug firing sequence for my 2000 honda accord?


2.3 L 4 cylinder is 1-3-4-2 & the distributor rotates clockwise.

3.0 L V6 is 1-4-2-5-3-6

2.3 liter
Cylinder # from passenger to drivers side 4-3-2-1
Distributor rotating clock wise #1 is at 6 O"clock (towards the radiator.)

3.0 liter V6
Cylinder # from passenger to drivers side, firewall 1-2-3
Cylinder # from passenger to drivers side, radiator 4-5-6

Good luck and keep me posted if you have any other questions.


Nov 08, 2009 | 2000 Honda Accord

1 Answer

How much quarts of oil does 1995 accord take?


hello,the correct amount of oil is 4 quarts with a new filter on the 4 cylinder engine and 4 1/2 on the 6 cylinder engine both when installing a new oil filter 3.7 and 4.2 without a new filter installed.

Sep 29, 2009 | 1995 Honda Accord

1 Answer

Plug wires and distributer cap


for the 1.5L -1.6L- 2.2L and 2.3L ENGINES. from left to right engine cylinders is 4 3 2 1 .now at distributor cap .get a piece of paper draw a big circle now at top of circle from left to right will be 2 then 1 from bottom of circle left to right will be 4 then 3.thats where you will put your plug wires.now the circle you draw 2 upper left of circle 1 upper right.at bottom circle 4 lower left of circle and 3 at lower right.

Jun 26, 2009 | 1995 Honda Accord

1 Answer

Honda Misses.


Pin point the dead hole and check that injector.

Dec 23, 2008 | 1995 Honda Accord

1 Answer

1989 Honda Accord Ignition Wires


I'll see if I can help the firing order is 1-3-4-2.

O O O O
4 3 2 1

Front of car
The o's represent the cylinders and the #'s represent the # of the cylinder.

On the distributor cap the top one is for #4 cylinder the next one down is #2 cylinder The next one is #1 cylinder and the last one is #3 cylinder. Hope this has helped you out and God bless your husband and you and our troops overseas!!!!!

Sep 11, 2008 | 1989 Honda Accord 4 Door

Not finding what you are looking for?
1995 Honda Accord Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...