Question about 2007 Chevrolet Equinox LS New Cars

3 Answers

Why does stabilitrak light come on saying service stabilitrak, stabilitrak off?

Posted by on

  • 2 more comments 
  • mike watson
    mike watson May 11, 2010

    Is there an ABS light on also?

  • Rob A Aug 26, 2013

    Bad vibration @25mph also

  • Rob A Aug 26, 2013

    Bad vibration @ 25 mph also

  • Anonymous Mar 21, 2014

    service stabilitrak

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 212 Answers

It's telling you your stabilitrak system is not functioning properly. Sensors in system are failing and setting service light. You need a GM dealer to diagnose system.

Posted on Feb 06, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try replacing the terminating resistor in the wiring harness (by the spare tire).

Posted on Nov 06, 2012

  • gjs7
    gjs7 Aug 13, 2014

    Resistor worked for 3 mos. then the light popped on. Replaced replaced the brake switch. six mos no more lights.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

There is a complete transmission recall up to 120k miles on 2007-09 Equinoxes as of Mar 15, 2015. These vehicles have major powertrain issues and this is just one one of them. Tell the dealer to perform an oil consumption test to see if you need a top-end rebuild.

Posted on Apr 05, 2016

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cansmo
  • 2431 Answers

SOURCE: no power steering and stabilitrak

You may be entitle to a campaign about ESC/steering module relearning, what happens if you leave the key in the ACC position for 2 seconds without starting the ESC is disable until you restart the vehicle. Here is the letter to owner number 07224A070911-005 , Hopefully this is still active and they should not charge you anything

Posted on Sep 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is making my stabilitrak light staying on


StabiliTrak service light - Chevy TrailBlazer, TrailBlazer SS and ...

forums.trailvoy.com > ... > 02-09 General Tech Q&A > General

Dec 24, 2009 - 11 posts - ‎7 authors
However, the StabiliTrak system seems to be working, as in my area ... If you have OnStar push the button when the Service Stabilitrak light is on have them run a diagnostic. ... 2007 Chevy TrailBlazer LS .... Choose your make. Service Stabilitrak light comes on
11 posts
Mar 31, 2011
Service Stabilitrak
11 posts
Mar 27, 2011
very strange thing happend/ traction control light ...
8 posts
Sep 2, 2010
Abs and traction control light
11 posts
Sep 20, 2009
More results from forums.trailvoy.com

Feb 09, 2016 | 2007 Chevrolet Trailblazer 4.2

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

I had a problem with power steering leak . They changed the hoses and pump and reservoir and rack. Now I have stabilitytrac control light on and when you are stopped you can't turn the steering wheel.


Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox
Jul 9, 2012 - I have a 08 Equinox with 79000 miles on it, for the last few weeks or soI've been having the service traction control/ service stabilitrak light ... HELP - Service Stabilitrak & Service Traction Control - Chevrolet ...
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
More results from chevroletforum.com

How To COMPLETELY Disable Traction/Stabilitrack Control ...

? 6:16
https://www.youtube.com/watch?v=TUoV2ue7amY
Jul 7, 2013 - Uploaded by Kyle Riegle
How to completely disable traction control on gm/chevy trucks and suv's. ... I got to anaheim the light of the ...

Has anyone ever had the service stabilitrak, service traction ...



Dec 05, 2015 | Cars & Trucks

1 Answer

#8 indicator light came on. I have no idea what this means?


StabiliTrak Problems - Free Lemon Law Help

www.lemonlaw.com/wordpress/stabilitrak-problems/
Oct 22, 2012 - Having StabiliTrak problems with your GMC, Buick, Chevrolet or Cadillac? Get free ... We owned a 2011 gmc Terrain with same issues. ... #8 Bill Hale says: ... A warning came on saying that I needed my Stability Serviced.

Jul 28, 2015 | 2011 GMC Terrain

1 Answer

I keep getting a message service stabilitrak


StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

Apr 29, 2015 | Cars & Trucks

1 Answer

What is an average cost to service the Stabilitrak System in a 2002 Cadillac Escalde


If the system fails to turn on or activate, the StabiliTrak light along with one of the following messages will be displayed on the Driver Information Center (DIC): TRACTION CONTROL OFF, SERVICE TRACTION CONTROL, STABILITRAK OFF, SERVICE STABILITRAK. If these DIC messages appear, make sure the StabiliTrak system has not been turned off using the StabiliTrak on/off button. Then turn the steering wheel clockwise from the nine o'clock position to the three o'clock position. If this clears the message(s), the vehicle does not need servicing. If this does not clear the message(s), then turn the vehicle off, wait 15 seconds, and then turn it back on again to reset the system. If any of these messages still appear on the DIC, the vehicle should be taken in for service.

Mar 17, 2013 | Cars & Trucks

4 Answers

My service stabletrack keeps come on how to fix that


Hi there:

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.


Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.


When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.


When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.


You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.


Hope this helps.

Jun 03, 2012 | 2006 Chevrolet Blazer

1 Answer

I have a wrench with a car swerving light up every once in awhile but I have no idea what it means and I have no idea what stabilitrak is


{: ) A car swerving light on the instrument cluster is the StabiTrak indicator, sometimes called the traction control indicator. A wrench beside it tells it requires servicing.

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.
Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.
When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.
When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.
You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.

Jan 25, 2011 | 2006 Chevrolet Trailblazer

Not finding what you are looking for?
2007 Chevrolet Equinox LS New Cars Logo

16,863 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...