Question about 1999 Jeep Cherokee
TRY SOME BLACK GRAFFITE AND PUT IN THE KEYHOLE. IF THAT DON'T WORK, TRY OPENING IT FROM THE INSIDE
Posted on Feb 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HHR back hatch problem
It most likely will be the fuse for the hatch, I would definately check out the fuse before trying other things. If the fuse is ok then it could be the release motor on the hatch.
Posted on Jun 12, 2008
SOURCE: hte back door wont open
Probably a issue with your actuator... there is a recall due to the "latching system does not meet the inertia load requirement" might want to check with the dealership to see if your vehicle is with this group, hope this helps :)
Recall 04V602000: Liftgate Latch Release Rod Replacement
Certain 2004-2005 sport utility vehicles and certain 2001-2003 sport utiity vehicles having rear liftgate components serviced with 2004 equivalent components fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components." The rear liftgate latching system does not meet the inertia load requirement in one direction.
Posted on Nov 08, 2008
you don't. take it into a Hyndai Dealership and have the handle repaired/replaced. The rear hatch panel/cover has to be removed (from inside the vehicle) to access the hatch latch and open the door.. from that point the handle can be replaced/repaired.
Posted on May 27, 2009
It sounds like the handle has become disconnected from the mechanism. You will have to remove the inner door panel and reattch. It is not a complicated or difficult job but if you get a professional it could cost upwards of $100.
Posted on Jul 16, 2009
You need to tighten the lock mech on the boot lid. this will close the boot just enough more to turn the light on. It's no biggy, you might need a star driver depending on bolt head. move it into the boot lid approx 4mm to start. then 1mm until 10mm. if no joy then it may be the sensor.
All the best
Posted on Jul 25, 2009
Tips for a great answer:
Apr 21, 2016 | 2008 Pontiac Torrent
Apr 12, 2016 | 2009 Kia Sportage
Apr 15, 2013 | 2007 GMC Envoy Denali
Mar 19, 2013 | 2005 Ford Freestar
Jul 08, 2012 | 2007 Scion xA
Jul 07, 2012 | 2001 Ford Escape
Nov 22, 2011 | Cars & Trucks
Jun 04, 2010 | 2005 Dodge Durango
Nov 17, 2008 | 1996 Mercury Villager
120 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: