Question about 1998 Ford Windstar

1 Answer

98 windstar #2 misfiring running lean obd says

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

Is this a 0174 code ?
You need to clean your MAF sensor with Mass air flow cleaner. Remove MAF from intake tube next to throttle body, inside looks like a honey comb, there is a thin wire, do not touch, just spray it clean, let it air dry.
Clear code, test drive

Posted on Feb 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge ram 1500 5.9L 2wd codes P0300, P0301, P0302, P0303, P0171. What all do I need to do to resolve??


the p0300--p0301-p0302=p0303 are misfire codes and can mean needs tune up or wiring problem and p0171 is system to lean bank 1 with this code if you correct it will probably correct the misfire codes your receiving
http://www.obd-codes.com/p0171 Fixing Hesitating Car P0171 Code YouTube P0171 System Too Lean Bank 1

Aug 26, 2016 | Dodge Cars & Trucks

1 Answer

Check engine light code p2196,p2197, po300 ,304,305,306,p2 ,Im freeking out.


P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder 1 Misfire Detected P0302 Cylinder 2 Misfire Detected P0303 Cylinder 3 Misfire Detected P0304 Cylinder 4 Misfire Detected P0305 Cylinder 5 Misfire Detected P0306 Cylinder 6 Misfire Detected P0307 Cylinder 7 Misfire Detected P0308 Cylinder 8 Misfire Detected P0309 Cylinder 9 Misfire Detected P0310 Cylinder 10 Misfire Detected P0311 Cylinder 11 Misfire Detected P0312 Cylinder 12 Misfire Detected P0313 Misfire Detected with Low Fuel P0314 Single Cylinder Misfire (Cylinder not Specified) P0315 Crankshaft Position System Variation Not Learned P0316 Misfire Detected On Startup (First 1000 Revolutions)

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com
-----------------------------------------------------------------------
P2195 O2 Sensor Signal Stuck Lean Bank1 Sensor 1 P2196 O2 Sensor Signal Stuck Rich Bank1 Sensor 1 P2197 O2 Sensor Signal Stuck Lean Bank2 Sensor 1 P2198 O2 Sensor Signal Stuck Rich Bank2 Sensor 1

Read more at: http://www.obd-codes.com/trouble_codes/
Copyright © OBD-Codes.com http://www.obd-codes.com/p0002

May 07, 2015 | 2006 Ford Taurus SEL

1 Answer

98 lincoln conttinental running lean stalling out


Check for vacuum leaks. if misfiring address the misfires as this will cause O2 sensors to detect more oxygen in the exaust system. Check you MAF sensor and clean if dirty

Sep 29, 2012 | 1998 Lincoln Continental

1 Answer

Cylinder misfire on #5 on 2001 ford windstar


I've been having this same problem, it's been bugging me for months, then it came to me out of the blue this afternoon. The DPFE sensor which replaces the MAP sensor on new vehicles. If it goes bad it can cause misfires and a lean situation. So I unplugged it this afternoon, no misfire sense

Feb 28, 2012 | 2001 Ford Windstar

1 Answer

If it rains my 01 ford windstar will not want to run. It will back fire and miss. When dry for few days it will run better engine light is on but if you clear the codes it will run like nothing is wrong....


Windstars are known for lean codes caused by upper intake plenum gaskets. Also, there is a small tube going into the air intake hose that will pull out if you tried to install an air filter. It goes into the air intake hose between the air filter box and the throttle body on the firewall side of the hose. Check it. As far as the EGR concern you would need to provide the exact code. The lean codes won't cause what you're describing. The symptom you're describing sounds more like a misfire. Windstars are known for ignition coils going bad due to hairline cracks allowing moisture in and causing the misfire. The coil is located behind the intake plenum. Also, windstars are known for fouling #'s 1,2 and 3 plugs with oil. Good luck. Be sure to have your rear axle and front subframe checked for cracks at a ford dealer. There's a safety recall on them and if it's too bad, Ford will purchase the vehicle for 1.5 times the book value if it's unsafe.

Apr 03, 2011 | 2001 Ford Windstar

1 Answer

1999 3.8L Ford windstar misfire


replace the EGR unit
put a can of injector cleaner in the tank
check the cat converter for blocking the exhaust system

Jun 02, 2017 | 1999 Ford Windstar

2 Answers

Why is my 1997 expedition showing a misfire on number 2 cylinder OBD code PO302. Also I am getting code readings PO174 andPO171 system to lean on Bank 1and 2


PO302 is being a misfire, could mean the plug is bad or the coil is bad for that cylinder. Which can give you the misfire reading and the system to lean codes. Check the #2 coil for firing.

Jan 28, 2010 | 1997 Ford Expedition

1 Answer

I have a ford windstar 2001 lx there are four code's i need info


#1 is the egr position sensor #4 Is for single cylinder misfire so this could be the coil or a bad plug or wire ..but with fords should check for a vacume leak that can cause a misfire to .....#2#3 are 02 sensors before i would change them i would check the mass air flow sensor ..Hope this helps

Nov 10, 2009 | 2001 Ford Windstar

2 Answers

2001 Ford Windstar, check engine light has been on for a while, but started flashing last night. It ran out of oil in 1 month's time. Brand new transmission 1 month ago, they told us that it had lean...


if the light is flashing it most like hasly some sort of misfire or converter failure, p0171 and p0174 is lean bank 1 and 2, replace you upper and lower plenum gaskets, while they have they off have they replace your ignition coil, plugs and wires, windstars are known for 2 things, lean codes,(plenum gaskets) misfire(bad ignition coil)

Jul 09, 2009 | 2001 Ford Windstar

Not finding what you are looking for?
1998 Ford Windstar Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...