Question about 1998 Ford Expedition

1 Answer

My 95 ford explorer, has a factory alarm, it won't turn off, and therefore I cannot start my truck.....we were having issues with the ignition, and now the truck won't start at all, we took out the relay for the horn, but the lights and everthing still flashing, I have never had the code for it(the door) and I'm not needing the alarm, so how do I by-pass it all together

Posted by on

  • yadayada
    yadayada May 11, 2010

    on this u can't bypass it without a rewire of the whole system.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 344 Answers

Dark green with purple wire in the drivers kick panel ground this wire to disarm you alarm for good

Posted on Feb 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont start


Does it crank and not start or won't crank at all? If it won't crank at all then the starter or solenoid that fires it could be defective. Also if it won't crank could be the neutral safety switch in the transmission keeping it from starting. Is there an alarm on this car? Alarms (especially aftermarket ones) usually have a starter interrupt circuit that prevents the ignition switch from activating the starter when they are set. Factory alarms may prevent the ignition system from firing if they are set or defective. Anyone been doing "non-standard" wiring under the dash recently??? Check that first then check the large gauge wiring connections, starter, ignition switch wiring and alarm(s) in that order and you should find your problem. This issue can be fairly simple but can also quickly turn into an complicated electrical troubleshooting nitemare. You may want to consider having it towed to a reputable shop for professional attention.

May 12, 2013 | 2000 Nissan Altima

1 Answer

Is there a killswitch in a 1991 explorer


I had a 91 and don't remember a kill switch of any kind in it. What was the scenario when the vehicle died? May be able to guide you in the right direction.

Aug 06, 2017 | 1991 Ford Explorer

2 Answers

My 2004 v6 ford explorer won't start new batery and new starter no luck wont even click ?


Did you check the start relay for voltage? Ohms reading?

If I remember correctly the circuit goes like this:
Key turns ignition switch which puts voltage to the start relay which engages the solenoid.
So if it isn't even clicking and your headlights seem to be working fine then it is either the ignition switch or the start solenoid coil.
On older Fords the start solenoid used to be remote mounted on a fender. I heard newer Ford vehicles had it integrated with the starter like GM does.
A quick visual inspection will tell you which and where you need to look.
You might check if there is a fuse for that as well.

Apr 01, 2010 | 2004 Ford Explorer

1 Answer

Changed engine in 2002 ford explorer alarm system won't let start engine


if its a factory alarm put key in door and lock and unlock drivers door, then try to start,try that. good luck.

Nov 01, 2009 | 2002 Ford Explorer

2 Answers

Replaced the ignition lock and tumbler. Alarm going off nostart


you need to have the keys programmed with a ford scantool. that's the only way.

May 24, 2009 | 1997 Ford Explorer AWD

1 Answer

Need new keychain alarm button


Is this a factory installed alarm system? If so, unlocking the driver door with the key will allow the car to start. If not then you will have to remove the aftermarket alarm system to start the car.
If you have a factory alarm system you can get a new FOB (key chain alarm button) from a ford dealer, but it must be programmed using a scanner , before it will work in your vehicle.

May 23, 2009 | 1996 Ford Explorer

1 Answer

Factory installed alarm won´t deactivate


Open the door insert key in ignition. turn to on

Now hold down the red button which should be flashing, untill silent

this will deactivate the alarm.


Jun 29, 2008 | 1999 Mitsubishi Montero Sport

Not finding what you are looking for?
1998 Ford Expedition Logo

525 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...