Question about 1990 Mitsubishi Mighty Max

2 Answers

Changed fuel punmp still haveing problems would my fuel problem be a sensor

Posted by on

  • yadayada
    yadayada May 11, 2010

    what sensor?



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 580 Answers

Have you changed the fuel filter? If not do so.

Posted on Feb 05, 2010

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check the fuel pump relay or the ASD relay. Using a fuel pressure tester, make sure you have the proper fuel pressure.

Posted on Feb 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you change the power steering punmp?

the best thing you can do is BUY a repair manual for it then read it

Mar 14, 2017 | Cars & Trucks

1 Answer

94 Dodge diesel change transfer punmp twice. Running change the fuel filter and it will not run now

It was running before you touched it - right? So now you go back over every little thing you did to undo the damage. Only you know what you done did or what you touched.

Sep 11, 2015 | Dodge Cars & Trucks

1 Answer

Lateral sensor problem with a vw mk4 4 motion golf just replaced abs sensor on front left put it on diagnostic tool and it's coming up lateral sensor prob which had nothing to do with the prob at the...

No just the ABS will not work but then when i was young cars never had this as they still had cable brakes so one adjust ones driving to compensate ,ie go slower and be carefull in wet or icey conditions and if the time comes for a emergency stop yank the handbrake on and punmp the brakes ,simple

Jan 05, 2014 | Cars & Trucks

1 Answer

Pontiac Aztek 2001 - 3.4l (non-GT); Codes: P0135, P0141, P0420 all O2 + Converter. Ideas on problem?

P0135 bank 1 sensor 1 open or short in wires,bad connections,bad sensor ,or bad ecm. P0141 bank 1 sensor 2 same diag as P0135. P0420 cat below threshold open or short, or faulty Ho2s may have several problems. start with sensors circuit if good change sensors if not trace to ecm if reading not right replace ecm if all good replace sensors clear codes retest drive two drive cycles for cat to clear tests. then with no dtcs present test fuel pressure , injectors,then ignition system ,timing valves ,map,maf sensors,throttle sensor,crank sensor cam sensor, compression.

Aug 02, 2012 | 2001 Pontiac Aztek

1 Answer

Were is the fuel pump i have a small gas leak and i think it is comeing from the fuel punmp so i am told. thanks Bill

if its leaking from the pump why cant the guy that SEES it leaking tell you? if its a mechanical pump its on the left front corner of the engine. Usually just a hose.

Aug 26, 2011 | 1985 Ford Econoline

1 Answer

Code P0133-02 (o2 sensor slow response) keeps coming up even though we changed this sensor like 3 times. How can I get my car to pass inspection? It's been 3 days of changing sensors, changing brands of...

just because you have a slow response code does not mean that you have a bad sensor, the slow response code is just telling you that the fuel system is very slow to respond to fuel delivery changes, this could be caused by many different things it could be as simple as the oil is contaminated with fuel, it could also be a problem with the fuel pressure, could also be a vacuum leak. the fact that you keep getting the same code with different sensors tells me that the problem is not the sensor but the fuel injection system. there is a flow chart for the fuel system and i am afraid you are going to have to have someone run a diag. check on the fuel system.....SORRY

Jan 13, 2011 | 2001 Hyundai Elantra

2 Answers

Fuel pump rely keeps going bad why is this?

There is a short in the wiring or the punmp is drawing to many amps and needs replaced

Dec 11, 2010 | 2005 Chrysler Pacifica

3 Answers

Smell like it is burning lean and it fell like it is going to go dead at the red light

o2 sensors will have to be changed. You should change them when exhaust is warm. Make sure you use an 02 socket only

Sep 10, 2009 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Can a bad map sensor cause a 2002 nissan maxima to have problems going above 2000 rpmscar runs has engine code for bad map sensor but will not go over 2000-2200 rpms so you canot really accelerate normally...

If the sensor is bad it causes the computer to change air/fuel mixture for the fuel injection and would have that effect,other possible causes would be a clogged fuel filter or the fuel pump is going bad but you need to change the map sensor if it is sending a code.

Aug 20, 2009 | 2002 Nissan Maxima

Not finding what you are looking for?
1990 Mitsubishi Mighty Max Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides