Question about 2008 Chevrolet Impala

1 Answer

The wiper fluid pump is not working. Does it have

The wiper fluid pump is not working on my 2008 Chevy Impala LTZ. Does it have a fuse?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

Yes, it has a fuse. if the fuse is good, check for voltage at the pump itself with a test light or meter.

Posted on Feb 05, 2010

  • feelyourpain Apr 14, 2011

    This is a known issue with the fuse, factory installed with under rated fuse. They suggest replacing fuse with higher rated fuse. The fuse may not look 'burnt' to the eye, but upon closer inspection you may see the middle section of the fuse 'cut out' / vaporized.

  • benzc240 Jun 02, 2011

    My washer quit working and as feelyourpain said there was a fuse issue. My fuse was fine so I took out the passenger side headlight ( one screw and a slide out locking tab) to gain access to the pump motor, I wiggled the connection and it's worked ever since.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will 235 70r16 tire go on 2008 chevy impala


For the 50th anniversary edition model, P235/50R 18
For the LS model Impala, P225/60R 16
For the LT model with a 3.5 liter engine, P225/60R 16
For the Lt model with a 3.9 liter engine, P225/55R 17
for the SS and LTZ models, P235/50R 18
Source: Goodyear Tire Manufacturer

Feb 19, 2017 | 2003 Chevrolet Impala

1 Answer

Looking for the fuse for the wiper motor 2008 chevy impala


WPR fuse 25amp under hood fuse box .
Wiper/Washer System Components
The Wiper/Washer System consists of the following components:
• Windshield wiper/washer switch
• Body control module (BCM)
• Wiper PCB relay
• Wiper high PCB relay
• Windshield wiper motor
• Windshield washer fluid pump
• Windshield washer fluid level switch
• WPR fuse 25 A
• WSW fuse 10 A
This is more then likely not a fuse issue !!!!!!!
Low Speed Operation
When the wiper switch is in the low speed position, ground is applied through the switch internal resistor and the wiper switch low signal circuit to the body control module (BCM). In response to this signal, the BCM energizes the WIPER PCB relay by applying battery voltage through the wiper relay control circuit to the coil side of the relay. This allows battery positive voltage from the WPR fuse to flow through the switch input side of the WIPER PCB relay and out to the switch input side of the WIPER HIGH PCB relay. Since the wiper high relay is de-energized and its switch contacts are normally closed to the low speed control circuit of the windshield wiper motor, the motor will operate at low speed.
Wiper motor low speed operation and the wiper PCB relay can also be commanded ON/OFF by using a scan tool. Refer to Control Module References.
The PCB relays mentioned above are soldered right into the circuit board inside the fuse/relay block under the hood . There are alot of reasons for the wipers not to work ! The fuse could be blown but fuse's don't just blow for no good reason , short to ground , low resistance high current flow etc.... Intermittant !

Power and Grounds
With the ignition in the ON position, accessory voltage is supplied through the 25A WPR fuse to the WIPER PCB relay, the WIPER HIGH PCB relay and the WS WASH PCB relay that are all located in the underhood fuse block. Refer to Wiper/Washer Schematics.
G200 provides ground for the windshield wiper motor and the WIPER PCB relay. G100 provides ground for the windshield washer fluid pump and the windshield washer fluid level switch.

Dec 04, 2016 | Cars & Trucks

2 Answers

Wiper motor


Possible wiper linkage has broken/seperated from wiper motor. The wiper cowling covering the linkage assembly will need to be removed to inspect/repair

Feb 13, 2016 | 2008 Chevrolet Impala

1 Answer

The wiper fluid pump is not working on my 2008 Chevy Impala LS. Does it have a fuse?


You can check that in the owners manual, all fuse diagrams are there. If you don't have the owners manual you can download one free HERE

Sep 17, 2012 | 2008 Chevrolet Impala

1 Answer

2008 chevy impala ltz wont start, first message: service stabilitrak, second message: battery saver active, what can i do to get it started?


have the battery ckecked then ck. 4 security codes and alt. output should be around 13.5 eng running

Jun 06, 2012 | 2008 Chevrolet Impala

1 Answer

01 Impala LTZ with 3.8 Trans won't shift out of


CHECK TRANSMISSION FLUID LEVEL FIRST BUT IT SOUND LIKE YOU NEED A FLUID AND FILTER CHANGE IF TRANSMISSION FILTER STOPPED UP TRANSMISSION PUMP CAN DRAW FLUID THROUGH CLOGGED FILTER.WHEN ENGINE AND TRANSMISSION GET HOT FLUID WILL GET HOT AND THIN ENOUGH TRAVEL THROUGH FILTER SO CAR CAN SHIFT INTO OVER DRIVE.DO A FLUID AND FILTER CHANGE SEE WHAT HAPPENS.

Aug 31, 2011 | 2000 Chevrolet Impala

2 Answers

Windshield washer pump fpr a 2006 chevy impala is there a fuse that could be bad ?


Yes, you could check for a fuse burnt out, but generally if the windshield washer pump doesn't buzz or turn so you can hear it, it means that in this weather, it is frozen up or burnt out. Usually it's just frozen with summer formulatioin of windshield wiper fluid which freezes at 32 deg. F.

Try to warm up the car in a heated garage to see if the windshield wiper fluid becomes unfrozen.

And, try to flush out the old fluid when you get it the pump free of ice, and install -20 deg. F or better wiper fluid.

Good luck on this repair.

Dec 18, 2010 | Chevrolet Impala Cars & Trucks

2 Answers

2006 chevy impala windshield wiper fluid will not work. It's not frozen, and the tank is full. Do I need a new pump, and if so where is the pump located?


I just fixed the wifes 2006 Impala, windshild washer. If you look at the manual, under the hood fuse panel, you will find two fused identified as windshild wiper. The one at the bottom is the washer pump. They even conviently provide a spare (10 amp) fuse just below it. swap out and ops check okay. Hope this helps.
SundogKB

Jan 18, 2010 | Chevrolet Impala Cars & Trucks

Not finding what you are looking for?
2008 Chevrolet Impala Logo

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...