Question about 1995 GMC Sierra

2 Answers

How do i take off the manuel handle for the window of a 1995 G.M.C. SIERRA 1500 Ext. interior

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 75 Answers

The first order of business: grab a screwdriver and wedge it between the door panel and crank. There’ll often be a plastic disc in between there as well as a clip. You may not be able to see the clip very well, or at all in some cases.If you can see the clip, start stuffing a rag in the space where the clip is. If you can’t see it, make a guess which side of the disc the clip is on. If you’re wrong the worst that’ll happen is you’ll have to repeat this. No harm done.Now using a flossing or shoe-shine motion (whichever analogy you prefer) work the rag back and forth, applying a little pressure. Most of the time the horseshoe clip is facing with the prongs down toward the handle, in which case you’ll want to work the rag around so the rag is hitting that part of the shaft. But sometimes it’s the other way, and you’ll need to spin the rag around and work that side of the crank.If everything goes well you might hear a tiny pop. You might be rewarded with the clip flying loose. Or you might hear nothing. In any case, try and remove the crank. If it doesn’t come loose, try again on the other side of the plastic disc or the reverse side of the shaft.
Note: Don’t lose the clip. You’ll need that to put the crank back on.
Installation is pretty simple as well. Just reassemble the crank/clip/disc and position the clip so it’s stuck on the crank in the slots but the prongs don’t go in them. Carefully position the crank in place and nudge the clip home with a screwdriver once it’s seated.

Posted on Feb 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

If it's the window crank use a screwdrver to push c clip off it it's the door crank it is the same thing but may have a locking screw behind the plastic plate. it has to e removed with a knife blade then remove the screw then remove the c clip.

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace window regulator rollers on 1995 GMC sierra 1500


You can't. Replace the regulator. Been there , done that. They don't last.

Aug 15, 2015 | 1995 GMC Sierra C1500

1 Answer

Window crank


It may be the power window regulator, and the window has become unaligned. This may be useful if you need to check it or replace it.

http://toyotarepair5.blogspot.co.uk/2011/05/how-to-replace-toyota-window-motor.html

Jun 03, 2017 | Toyota Cars & Trucks

1 Answer

How do you take off the knob for the manual windows in a 2002 GMC Sierra 2500HD? I need to replace my speakers and i cant take the interior of the doors off to replace the speakers because of that window...


on the handle you have a plastic cover that goes from the knob to the wide end.prise this off and you will see a screw,remove it and the handle will fall off.

Aug 26, 2010 | 2002 GMC Sierra 2500HD

1 Answer

I have a 1995 GMC K3500, I'm trying to replace the interior driver's side door handle, and I'm having trouble getting the window crank off, any advice?


There is a clip behind the handle, sometimes you can get a small screw driver or flat metal and pry it off gently, becareful because if it flies off, you may not be able to find it. It PUSHES off, out of a slot in the handle.

May 12, 2010 | 1993 GMC Sierra K3500

1 Answer

The interior lights do not work on my 1995 GMC 1500 Sierra Pickup


Either the door switch, console light switch (if it can turn /on/off these lights) fuse, relay and its source of power. If the interior lights on ceiling have an on/off switch check this out to. B+ must be present at these lights when doors are open or switches are closedaka on position. I would check for B+ leaving the relay after each one of the controls are activated seperately. Remember the relay and fuse are common to all the controls.

Apr 09, 2010 | 1995 GMC Sierra C1500

1 Answer

Pass. side front and rear power windows stopped working


if they only stoped working on the passengers side I would check the wirring going into passengers side door for a broken wire, or right at the passengers side kick panel.

Mar 14, 2009 | 2008 GMC Sierra 1500

1 Answer

2008 GMC Sierra Ext. cab runnungboard lights


yes wire the runningboard lights together and then to the interior light post on fuse box or to interior light switch on drivers side door

Nov 08, 2008 | 2008 GMC Sierra 2500HD 2WD

1 Answer

1995 GMC Sierra Ext Cab


You need to replace the blower motor resistor

Sep 22, 2008 | 1995 GMC Sierra

2 Answers

How do you repair a gmc sierra 1998 inside door handle


You have to remove the door panel, if you have roll down windows the handle will have to be removed. After panel is removed you have to drill the one rivet that hols the interior handle. slide the handle down and unfasten the rod retaining clip. Please make sure you do not break the clip. Install the new interior door handle, clip and provided fasteners. Try the door before you install the interior door panel, Note the is a good time to lube the window roller and the door mechanism. Make sure to install the water shield to provide the protecting from the elements. Line all the plastic retaining clips and or replace if they are broken. Good Luck.

Jul 22, 2008 | GMC Sierra Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...