Question about 2005 Honda Civic

1 Answer

55 plate civic type-r has developed a headlight fault

The nearside cluster is not working as it should- the sidelights are ok but as soon as you put the dipped headlights on this brings the full beams on but all are really dim,then if you put the highbeams on the n/s cluster goes out completely but the offside works properly. Iv changed all the lamps in the nearside and no joy-iv also swapped all the lamps from one side to the other but the fault stays on the n/s cluster,any tips? Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 75,197 Answers

What is a "55 Plate"?

Posted on Jun 29, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

j_del
  • 1586 Answers

SOURCE: my headlights dont work my

It's likely your switch. It failed on my girlfriend's 93 Civic LX and changing the light switch/stalk fixed the problem. She'd turn on the switch for the low beams and get nothing.

You can get the switch assembly at a dealer, on eBay, or at a scrapyard. Changing it is easy - remove the steering column trim covers (a handful of screws on the bottom) and this will expose the switch body. Unscrew it so it comes free, unplug the harness that is plugged into it, plug in the new one, screw it back in place, and reinstall the column trim, and you're done. It's about a five minute job, no joke.

Posted on Aug 09, 2008

  • 1 Answer

SOURCE: 2003 honda civic headlights problem

the comination switch

Posted on Nov 16, 2008

  • 150 Answers

SOURCE: 1986 Honda Accord Passenger Headlight doesn't work

Check the earth wires have a good connection and are clean..

Posted on Feb 28, 2009

  • 2 Answers

SOURCE: 2001 honda civic: headlight problem

There was a recall for this problem, if youve never had it fixed you should take it in to your local dealer.

Posted on Mar 20, 2009

obzy
  • 31 Answers

SOURCE: 2000 honda civic vp keeps blowing low beam fuses left and right.

Fuses nearly always blow because of a bad earth. The switch only needs to short for a moment and the fuse will blow.

See if you can find a replcement swtich from a local breaker's yard or ebay and go on from there.

Posted on Apr 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Sidelight bulb replacement on 1997 toyota corolla


open up the bonnet and you should see a screw attaching to the sidelight cluster. this is the only screw to... unscrew. after this pull the sidelight straight forward not sideways or any other way, then you should be able to access the bulb. putting it back is basically all that in reverse, just observe the little clip on the back of the cluster that it goes into the hole its meant to :-)
hope this helps as i had trouble at first

on Feb 21, 2009 | 1997 Toyota Corolla

1 Answer

H1 mobile reset


My nearside main beam isn't workingicon1.png,on my freelander 2005. I have checked the fuses and they are okay and replaced the bulb and checked the fitting all looks fine, but still not workin all other front nearsides are okay (sidelight and full beam), as are the offside ones

Jul 25, 2013 | Hummer Cars & Trucks

1 Answer

1997 passat sidelight fault


The problem is likely in the headlight switch--either a failing contact or perhaps an issue with the connector at the switch. see wiring diagram below.

0900c152800c2f17-cq3vfglkpckz1g4izlohzujr-2-0.gif

May 18, 2017 | 1997 Volkswagen Passat

1 Answer

Headlights not working on classic rangerover 1991


For All Types of headlights not working problem? Click the link below :----http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html
----------This will help.Thanks.

Mar 05, 2012 | Cars & Trucks

1 Answer

I have a 1998 Z3 1.9. The nearside (UK) sidelight does not come on, but the high beam does (same single element bulb). Checked sidelight fuses after replacing bulb... neither seems faulty. Any help as to...


hi.
the side light and the high beam will be different bulbs. they may appear to be the same, but if you look carefully, there is a smaller bulb, normally just below the main bulb. the sidelight will usually be a small 5watt bulb where the main beam bulb will be much larger, and anywhere between 45 and 65 watts. look for the smaller bulb and replace that first..

Aug 03, 2011 | BMW Z3 Cars & Trucks

2 Answers

My nearside main beam isn't working, I have checked the fuses and they are okay and replaced the bulb, but still not workin all other front nearsides are okay (sidelight and full beam), as are the offside...


My nearside main beam isn't workingicon1.png, I have checked the fuses and they are okay and replaced the bulb,the fitting is fine. but it's still not workin all other front nearsides are okay (sidelight and full beam), as are the offside ones

Oct 05, 2010 | 2004 Land Rover FreeLander

1 Answer

Headlight swicht broke


Removal & Installation
  1. Disconnect the negative battery cable from the battery.
  2. Remove the lower steering column cover-to-instrument panel screws and the cover.
  3. Remove the instrument cluster trim plate-to-instrument cluster screws and the panel, then allow the panel to hang to the left side by the wiring.
  4. Disconnect the electrical connector from the rear of the headlight switch.
  5. Disengage and remove the headlight switch from the instrument cluster trim plate.
To install:
  1. Connect the electrical connector to the rear of the headlight switch.
  2. Engage and install the headlight switch in the instrument cluster trim plate.
  3. Install the instrument cluster trim plate-to-instrument cluster screws and the panel.
  4. Install the lower steering column cover-to-instrument panel screws and the cover.
  5. Connect the negative battery cable to the battery and check operation.

Apr 27, 2010 | 1995 Chevrolet Astro

1 Answer

Electrical fault, Brake-light / Side light


hi simple one the brake light bulb replace the bulbs brake light filiment has gone on one side droped on to the lights circiut hence press brake light headlights come on and vise versa yates210456

Oct 05, 2008 | 2000 Ford Escort

Not finding what you are looking for?
2005 Honda Civic Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...