Question about 1999 Chevrolet Suburban

2 Answers

2002 Trail Blazer. Wipers work on low and high

2002 Trail Blazer. Wipers work on low and high but only come on once in the intermittent settings

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

The switch is bad replace it, it is a common problem costs about $60.00 and has two screws holding it on. you can get it at auto zone Shucks or Orilays or checker auto or pep boys.

Posted on Feb 05, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

Sounds like the wiper module is bad. if it is toy will have to replace the wiper motor. the module is built right in

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the relay location in the relay box


The problem would be in the stalk controller. The wiper Relay is what provides power to the motor for all settings, the delayed wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working.

Jul 27, 2014 | 1998 Ford Ranger

2 Answers

Wipers don't work in high speed and when intermittent wipers are set they stop in the middle of the windshield.


Yes that is likely a switch problem. Before you buy any parts have a shop confirm my guess.

Mar 21, 2014 | 1994 Ford Crown Victoria

1 Answer

I have replaced the wiper switch on my 1990 F 250 and it still is not working properly. Since the wipers work I am assuming it is not the motor. That seems to indicate it is something called the...


Hi:
If your truck has a wiper switch that you rotate counter clockwise to get the intermittent wipe mode, and turn clockwise to get to the low and high settings, then your truck has a interval wiper relay module. You could have a bad wiper switch assembly too, as the intermittent part of the switch is seperate from the low and high wiper switch. It is a inexpensive part, less than $20 for the switch, and the interval wiper relay part is somewhat expensive, 70-100 bucks or so. My truck didn't have intermittent wipers when I bought it, so I went to a junk yard and removed a switch and a module from a wrecked truck for $40, and it has worked fine ever since. Maybe you can find a good used part to swap into your truck for testing? Once you buy new electrical parts, you cant return them!

Apr 21, 2010 | 1990 Ford F250

1 Answer

1998 Blazer wipers will work then stop. High speed will be intermittent and slow, then stop. Is this still the circuit board and is so, where do I find it?


I would start by changing the wipers RELAY. It is located in the fuse box either under the dashboard or in the engine compartment.

Good Luck

Mar 03, 2010 | 1998 Chevrolet Blazer

1 Answer

2002 chevy tracker the intermittant wipers will not work?


You could have a bad wiper motor circut board problem. You can pick on up at a parts store for less then at the dealer but check to make sure it's the board and not the switch it self.
Good luck and hope this helps. 

Apr 23, 2009 | 2002 Chevrolet Tracker

2 Answers

Wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.


i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Thanks
Please leave rating

Apr 21, 2009 | 2000 Isuzu Amigo

1 Answer

Trying to put on a power steering pump for a 2002 trail blazer


once u take off the belt.see the holes in the pully put socket in the hole once u line them up with the 3 bolts to take it off

Feb 01, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

2005 Dodge Ram 1500 4x4 - Intermittent wiper problem


There is a fault with Wiper stalk have got same prob with my 2006 ram 1500 5.7l hemi they should change under warrenty are with mine

Oct 12, 2008 | 2002 Dodge Ram Maxi

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...