Question about 2004 Land Rover FreeLander

1 Answer

My back passengers window does not go up and down on the electric switch ? motor works, just think window is detached inside door panel, is this easy to access and self-fix?? Many thanks Col

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Land Rover Master
  • 5,763 Answers

If the motor works then the regulator is broken, you hear the motor running ? is this how you now the motor is good? if so then check the regulator. just remove the panel and check the regular, this is the part that the motor moves to control the glass and yes you can do the job,the plastic holders or the cable breaks.hope this helps

Posted on Feb 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you fix power window that does nothing


Check the up down switches they cop a lot of work where the.back ones don,t get a lot. Check the electric. motors and runners inside the door .

Sep 02, 2017 | Cars & Trucks

1 Answer

Right passenger rear window on my 1999 Cadalic DeVille will go down but not back up. Any suggestions?


Do you know how to test automotive electrical circuits with a DVOM - digital volt ohm meter , pull the inside door panel check for B+ voltage at the motor and switch . Power at up an down switch an motor , the window regulator is bad . Automotive Electric Window and Switch Troubleshooting Repair Guide

Feb 09, 2017 | Cars & Trucks

2 Answers

My passenger side electric window stopped working on my 1991gmc sierra 1500. The passenger side switch panel don't work for the window but works for the lock. Driver side master switch doesn't work for the...


The odds of both switches going bad at the same time is high, remove the door panel and tap on the window motor with a hammer, while trying the switches. I may have jammed up. Ground a test light and check the motor connection, while trying the switch, power will show on either side depending on if it turning up or down

Mar 19, 2015 | Cars & Trucks

1 Answer

My power windows in driver side and passenger back window wont go up or down.


A master switch may be at falt, but try you may want to check power gets to window motors, remove door panels and use your test lite activate switch and see if lites Ok then needs a window motor if no your master switch is bad..
Very rarely on this year you may also found broken wires between drivers door and vehicle, where harness pass from door to inside car, disconet harnes from inside left kick panel and pull it out towars door pull black rubber boot back remove electrical tape and check all wires if any open or split repair and rechek al over. good luck

Dec 05, 2010 | 1996 Toyota Camry

1 Answer

Back weindow doesnt work. motor and switches are fine. i think its a grounding problem, but i dont know how to fix it.


I have a '94 Camry that the passenger side back window would go down,but not back up. The problem was at the driver's door where the wiring comes from the body, inside the rubber wire loom there was a broken wire. Found it while installing new speakers and wire(had the door panels and kick panels off) Easy fix with soldier and soldier iron.

Feb 01, 2010 | Toyota Camry Cars & Trucks

2 Answers

How to replace passenger side mirror on 2007 Camry


To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.

Dec 04, 2009 | 2007 Toyota Camry

4 Answers

2000 Saturn SL2 driver's side electric window. Motor works - but window does not go up and down, or goes part way, or goes crooked. What is the fix and steps to accomplish it "? . Also best method to...


Fore remove the door panel in a SL2, you have to take off the door handle. You have to disengage the door locking mechanism from the door handle, then unscrew the panel and take it off.

The door handle unhinges from the locks and from the window controls. If your windows are electric, just unsnap the cord attached and leave it hanging out.

You may have to work with the door handle as it won't come out of the slot very easily and you don't have a lot of room. A flat bladed screwdriver with a long metal piece should work to unsnap it.


ION, L-Series, S-Series 1999-2005 - Window Systems

Door Glass & Regulator
Power Windows
Diagnosis & Testing
Driver's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the driver window switch.
  2. Test for infinite resistance between the signal terminals A and B and the B+ circuit terminal E with the passenger window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  3. Test for less than 2 ohms of resistance between the signal terminal A and the B+ circuit terminal E with the passenger window switch in the UP position. If greater than 2 ohms, replace the driver window switch.
  4. Test for less than 2 ohms of resistance between the signal terminal B and the B+ circuit terminal E with the passenger window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
  5. Test for infinite resistance between the signal terminals F and H and the B+ circuit terminal E with the driver window switch in the INACTIVE position. If less than infinite resistance, replace the driver window switch.
  6. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal E with the driver window switch in the UP position. If greater than 2 ohms, replace the driver window switch
  7. Test for less than 2 ohms of resistance between the signal terminal H and the B+ circuit terminal E with the driver window switch in the DOWN position. If greater than 2 ohms, replace the driver window switch.
Passenger's Window Switch
  1. Turn the ignition OFF, disconnect the harness connector at the passenger window switch. Test for infinite resistance between the signal terminals G and F and the B+ circuit terminal with the switch in the INACTIVE position. If less than infinite resistance, replace the switch.
  2. Test for less than 2 ohms of resistance between the signal terminal G and the B+ circuit terminal with the switch in the UP position. If greater than 2 ohms, replace the switch.
  3. Test for less than 2 ohms of resistance between the signal terminal F and the B+ circuit terminal with the switch in the DOWN position. If greater than 2 ohms, replace the switch.
Window Motor
  1. Install a 30-amp fused jumper wire between the control terminal A and 12 volts. Momentarily install a jumper wire between the control terminal B and ground. The motor should perform the UP or DOWN function.
  2. If the function does not perform as specified, replace the motor.
  3. Reverse the jumper wires; the motor should perform the DOWN or UP function.
  4. If the function does not perform as specified, replace the motor.
Removal & Installation
Window Motor & Regulator
  1. Raise the window to the full UP position.
  2. Remove the upper trim panel.
  3. Remove the manual window regulator handle, if equipped.
  4. Remove the power door lock switch, if equipped.
  5. Remove the pull cup assembly.
  6. Remove the door trim push-in retainers.
  7. Remove the screw from the trim panel.
  8. Pull the bottom of the door trim out to disengage the clips.
  9. Lift up on the door trim panel to disengage the inner belt molding from the door flange.
  10. Remove the door trim panel.
  11. Remove the radio speaker.
  12. Remove the front door water deflector.
  13. Disengage the door glass to the regulator sash channel clips. Separate the door glass from the sash channel.
  14. Push the window to the up position and tape in place.
  15. Loosen the power window regulator bolts.
  16. Remove the rear regulator bolt.
  17. Lift the window regulator, disengaging the loosened bolts from the door.
  18. Disconnect the regulator electrical connector.
  19. Remove the power window regulator from the door.
To install:
  1. Installation is the reverse of removal.
Window Switch
  1. Using a flat-bladed tool, pry the switch from the door trim panel enough to expose the locking tabs.
  2. Press the locking tab to remove the switch from the door trim panel.
  3. Disconnect the electrical connector.
  4. Remove the switch.
To install:
  1. Installation is the reverse of removal.

I hope helped with this; good luck.

Oct 21, 2009 | 2000 Saturn SL

3 Answers

Passenger window will not go up i think its


if the fuse was an issue then all the windows would be inop, not just one, the most common fault is the electric motor that runs the window up and down.

Oct 03, 2009 | 2003 Ford Expedition

1 Answer

Front windows don't go down


well you can take the door panels off using a philips. pry the little reflector off and remove the one philips in there. then by the arm rest remove that small piece with a lil screwdriver. 2 more bolts under there. remove lil triangle from top of door. then pull out on door panel. id use some jumper cables to make sure motor is working. start trying to elimanate the problem. may be window motor, switch, body control module or fuses

Jul 05, 2009 | 2001 Oldsmobile Alero

1 Answer

Remove inside panel pass.side door of 2001 Dodge gr.caravan sport


1, Disconnect the able from negative terminal of the battery.
2. Pry the courtesy light from the door trim and disconnect the wire connector..
3. Remove all door trim panel retaining screws and door pull armrest assemblies.
4. Remove the door switch panel and the control switch panel and the control switch assembly.
5. On models with memory seats/mirrors, use small-flat bladed pry tool to remove and disconnect the wire.
6. Grasp the trim panel lift up and pull out to detach it from the door. Disconnect the inner door handle lock rod from the handle. Unplug any electrical connectors remaining and remove the door panel.
7. To install, connect the wire harness connectors and place the panel in position in the door. Press the trim panel down into place until the hooks are seated.
8. Install the armrest/door pulls, the courtesy light and the window switch'
9. Reconnect the battery


Also. You will need star pattern drivers to remove the window and motor from your door. If you have all the equipment it should only take you 1 hour.

Jan 15, 2009 | 2000 Dodge Caravan

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...