Question about 1998 Oldsmobile Cutlass

Open Question

How do I remove headrest on 1998 cutlass - 1998 Oldsmobile Cutlass

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove head rest in a 1998 mustang


loosen up the cover to the seat and reach into the actual seat from underneath, there should be 2 latches. The closest one at the bottom of the headrest system locks the headrest at the upmost position. If you lift up that latch (as in pull it away from the headrest) the headrest should be easy to just push the rest of the way...

Apr 03, 2014 | 1998 Ford Mustang

1 Answer

Remove headrest for reupholstering


Many times there is a sliding knob or button on the outside of the seat. You hold the slider up while lifting on the head reat.

Mar 29, 2014 | 1997 Oldsmobile Cutlass Supreme

1 Answer

I need to remove the headrests to install seatcovers on my 1998 Cutlass Supreme


Sorry I don't know this exact model, so if this does not help please post again.

Look at the base where the bars go into the seat, around the bases will be a button or what looks like a button on the base, you either push this in, now if it does not push in then it's usually a clip thet needs to come out.

Look at both bases, carefully for a spot where a small notch is, this is so the plastic clip can be pulled out so the headrest can be pulled out.

So try pushing in on the spot that looks like it has a seam around a button, or you pull it out.

Apr 15, 2013 | Cars & Trucks

1 Answer

Trying to remove the headrests from the front seats of a 1998 Buick Regal LS. Want to remove old sheep seat covers for cleaning. Can't find any release. There is a small hole in the back of each plastic...


THERE MAY BE O LOCKING MECHANISM INSIDE! TRY USING A SMALL HARD WIRE, LIKE A LONG ALLEN WRENCH THAT WILL FIT IN THAT HOLE! IF THERE IS ONE THERE, YOU SHOULD BE ABLE TO RELEASE IT WITH A LITTLE PRESSURE TO UNLOCK THE HEADREST!

Mar 01, 2011 | 1995 Buick Regal

2 Answers

I need to remove my headrest to change my seatbelt guide ; i can t get headrest to come off. Thank you


Pull the seat fabric down in front to expose the plastic piece that the headrest bar inserts through. You will see a small wire clip inserted through plastic. Remove it by prying with small flat head screwdriver. Repeat on other side. Headrest will then slide out.

Jul 02, 2010 | 1997 Chevrolet Cavalier

1 Answer

How do you remove the headrest on a 1998 daewoo


hi normally you can do this by...pulling the headrest top its maximum height , at the bottom you should see two black plastic rings, on either side of these rings are little partitions push these inward and pull the headrest at the same it can be a bit awkward but if you do one side at a time or get someone to pull the headrest while you push the clips in can be very helpfull...hope this helps please vote thanks

May 11, 2010 | 1999 Daewoo Lanos

1 Answer

Front power headrest removal


hello,you need to remove your rear seat,,look for your your headrest valve ,there is a lock pin with tension clip in headrest rod ,remove the pin,try to remove your headrest slowly,ty

May 07, 2009 | Mercedes-Benz 560-Series Cars & Trucks

1 Answer

Cannot remove back seat headrests for 98 328i


Im doing the same thing.. Push the headrest full forward, then lift hard to get past last indent in pole.. This worked for the front as well.. i also could not find a hole to push

Apr 05, 2009 | 1998 BMW 3 Series

1 Answer

Headrest removal


Usea small flat screwdriverand run down along side the inside of the headrest rod. You will unclip 1 side and the rod will release. Do the same on the other and the headrest will come off. When you want to put back on just install and push down. Follow same procedure when you want to remove again. It is a little touchy but as soom as you remove 1 you will become a expert. I have done hundreds of those in the past couple years.

Jul 19, 2008 | 1998 Pontiac Sunfire

2 Answers

Toyota tacoma headrest removal


There should be a button on the base of the headrest to raise & lower it. Push the button, and lower it. With the button pushed, raise the headrest, and pull hard. They ARE tight.

Jun 25, 2008 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
1998 Oldsmobile Cutlass Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...