Question about 1999 Chevrolet Silverado 1500

3 Answers

Where is the crank sensor located on the motor for a 1999,5.7 Vortec, engine and what tool will i need to replace it may i have a picture veiw? or how do i go about looking information

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1999 chevy 1500 series has spark getting fuel wont start replaced crank position sensor cap n rotor getting backfire through throttle body.

Posted on Feb 08, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am Trying to do an engine swap on my 2000 chevrolet c1500 pickup, I'm putting a 5.7 vortec in place of my 4.3 vortec is there anyone that has done this please email me at hanger18@cableone.net Thank you.

Posted on Mar 27, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

My book only goes up to 98 and shows it in the side of distributor base.If you have distributor would think the same spot.If you have coil pack would look around the front harmonic balincer.Well hope this helped.

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the location of the crank sensor on my Toyota Celica st202 2.0 16 v engine import model


short answer, there is NONE.

wow no year car stated. gen6 1993 to 1999?

what country, in USA, all car in 1996 , gained a crank sensor if not already there. this sensor was for making the OBD2 misfire monitor function correctly.



so, no country NO JOY? the 1millionth post with no country stated. and a very technical question, related to smog too.

but?

if the scan tool does not show a DTC error for it, it\'s not bad.

so why look?

which engine: of the 3

2.0 L 3S-FE I4,

2.0 L 3S-GE I4,

2.0 L 3S-GTE I4 turbo,



ill pretend (dumb huh) its a 1999, 3S-FE engine, with USA market codes on the body tag.



a fast look at alldata.com the 1993 has no such sensor , only the CMP cam sensor in the dizzy.



the 1996 car the 3S engine was dropped and 5A replaced

the ckp crank sensor on the 5A runs off the front of crank at front of engine, at the right side. of crank pulley



our looks like this.



bc56052d-a780-4b26-9867-89fd5c934b11.jpg



if i look at our, 3S engine, 1993 there is no such sensor.

sorry , none. that year

so why not post the symptoms and not chase phantoms.

Oct 03, 2014 | Cars & Trucks

1 Answer

Where is crank shaft sensor located


old post.
There are many Vitara engines, what size is yours.?
the noid lamp will not work VR crank sensors.
and many Halls will fail that test too, (a 10,000 ohm pull up stops that)
the noid suck big time current. (if your NOID is LED, then yes it works on most HALL sensors and never VR type.
the VR type has only 2 wire. the Hall has 3 or 4 wire (power)
the G16 motor uses hall sensors and creates a nice square wave. any DSO can see that signal.

why not say why you suspect this sensor.
and the car still starts with a Dead CKP on this G16 motor.!
The CKP only makes "ECU misfire work, detection"
the 1995 had no such sensor. and runs.
if the car will not start, then its not the CKP it\'s the CMP sensor
(dead spark) (no spark? the ECU cuts all FUEL)
the cam or DISSY sensor inside it is CMP.
this CMP dead, causes NO Spark , no start and No fuel.

the crank CKP sensor on some suz, are not hall but just a VR coil
and you need scope or other very special tool (mag) to test it.
on all 1999 here, our Scan tools tells you which is bad.
no scan tool? P0340, 355, cranking or running.

I post this to show that , it\'s best to post simptoms first
then ask how to find out why.
the first step is the CEL lamp. (what it does and the scan tool facts)
or post here.
http://www.fixkick.com/bbs2/Suzuki-bbs/forumdisplay.php?fid=2

Feb 04, 2013 | 1999 Suzuki Vitara

1 Answer

How to locate the crank positioning sensor on a 1999 dodge caravan 3.0 l motor


the crank position sensor is located on transmission housing near the top at back of engine. this is for a 97 but yours should be the same. if not there, check left side rear of engine. good-day!

Jul 21, 2011 | 1999 Dodge Caravan

2 Answers

305 vortec engine and has no fire need to know where to start, how to check crank sensor, or what else i need to check


if it died all of a sudden no warning, replace the ingition moduel located in the distrubitor. These are common to go out without warning and would cause no spark. It's like a $30 part and just simple tools needed to replace. If it went out over time let me know and I'll tell you what else to check.

Jun 06, 2010 | 1997 Chevrolet K1500

1 Answer

1999 chevy suburban 5.7 L. vortec. Can a bad camshaft sensor cause a no start? rebuilt engine, fuel pressure 60 LBS.,spark at all the plugs, compression 140 lbs, timing is dead on.


i do believe it will not start with out it if you can hook up a scan tool to it crank the engine and look at rpms while cranking should read about two hundred forty rpms thats what fires the injectors the cam sensor tells the computer what cylinder is ready to fire next also scanner will set the cam timming.

May 27, 2010 | 1997 Chevrolet Blazer

2 Answers

Location of the camshaft and crankshaft sensors


cam sensor is on the driver side, front of the motor, just below the valve covers in easy veiw, just outboard of the water temp sensor and they both share the same wiring harness.  The cam sensor is on the passenger side, actually on the transmission bell housing.  It takes the signal from the flywheel next to the ring gear, about an inch from the engine on the transmission bellhousing.  Accesible from the top and easier if you remove the air filter duct.  Or jack up the front passenger side and easier if you come in from the front and its behind the axel, behind the motor, go up the bell housing, just below crank shaft level.  Go with this first , it tells the comp when to send fuel.  If you're getting spark with a 1381 code and you're choosing between CAM & CRANK, start with this, this is the culprit.  Consider getting it from the dealer.  Good luck.  This is Waverunner70, Hope I could help.

Feb 28, 2009 | 1999 Dodge Intrepid

4 Answers

Crank sensor location 1999 dodge durango


the crank sensor is located passenger side back of the engine were the trans and engine come together .there are 2 - 13mm.bolts that bolt to top of the engine.

Feb 22, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...