Question about 1995 Chrysler LHS

1 Answer

1995 CRYSLER LHS,WONT START AT ALL,TRIED CHANGING SENSORS,FEUL PUMP,COIL PACKS AND COMPUTER BOXES,JUST WONT START?ANY IDEA?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 234 Answers

If it is cranking with out turning over I would check the fuel pump and ignition relay, crank and cam sensors.
Basically you need to figure out if you have a spark issue or a fuel issue. (as long as you didn't have a serious overheating problem). One way to help you figure this out is by spraying in some starting fluid while cranking the engine. If it starts you have a fuel problem, if nothing then you have a spark problem (assuming you didn't blow the head gasket from overheating and was running normally before this happened).
Based on what you've already done here are my recommendations:
No spark: check ignition relay
No fuel: check fuel pump relay (aka shutoff relay, aka fuel pump shutoff relay), crank and cam position sensors, fuel filter.
There is also one other possibility, that the timing belt snapped. You would need to remove the timing cover to check this.

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sorry 2003 holden astra city i put another engine into it and have done a new fuel pump all the sensors feul relays coil pack sparkies timing belt etc etc etc nothing left to change and when she starts she...


You need the computer that went with the engine you put in,it controls all the sensor.the sensors are set to that computer box.please let me how you get on

Mar 03, 2015 | Holden Cars & Trucks

2 Answers

I have a 97 lhs that wont start we have replaced


a double post? see my long answer, on 1st post.

Oct 02, 2013 | 1997 Chrysler LHS

1 Answer

Why wont my 1995 chrysler lhs coil pack get a spark?


Its probably a bad crank position sensor or cam angle sensor.

Less likely, it could be a broken timing belt, bad ASD relay, or bad ECU(PCM).

Jan 21, 2011 | 1995 Chrysler LHS

3 Answers

Starting problems


since the computer is only supposed to send fuel and spark signals in reaction to input info, unless a wire in the harness is either grounding or crossing into an output wire, i'd think it's safe to assume the computer is doing that internally. Another reason is that if it were a wiring problem, pretty likely it would not run well after you did get it started.
The only thing I'd do aside from replacing the computer is to unplug all the sensors one by one while it is acting up, to get an idea about wether the errant signal is coming from a sensor or internally.
Likely you can get another computer from a scrapyard.for lots less than a new one. Since this is a "guess" repair, you may want to try that.

Jul 13, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Engine turns over but not fire from coil pack


coil , mas air flow sensor , can go on and on . best thing is to check for malfunction codes

May 24, 2009 | 1995 Chrysler LHS

1 Answer

Tried to hook up computer to get diagnosis and read error


have you checked your crankshaft position sensor. they tend to go out pretty regularly

May 20, 2009 | 2001 Jeep Cherokee

1 Answer

Have 1995 jeep wrangler-2.5 engine, won't start, have power to coil pack but not past coil pack, replaced coil pack with new one,electrical problem or possible sensor just not sure what to look for,anyone...


Most common cause is the crank sensor...It tells the computer when to fire off coil. Cam sensor does this as well but is less prone to failure. Don't change parts because I said so! Proper testing is essential! Test b&c terminals of sensor with an ohmeter. There should be no continuity there (same as when the ohmeter probes are not connected to anything) Terminals should be marked on harness connector.

Apr 15, 2009 | 1995 Jeep Wrangler

2 Answers

Escort 1998 1.8 zetec mis firing


Hello, did you try changing your coil pack

Feb 07, 2009 | 1996 Ford Escort 4 Door

2 Answers

Please help me


have you checked the starter

Nov 06, 2008 | 1995 Buick Regal

Not finding what you are looking for?
1995 Chrysler LHS Logo

776 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...