Question about 1991 Honda Accord

1 Answer

Changed cap and rotor but the problem still persists the car does not want to start

Posted by on

  • philschneide
    philschneide May 11, 2010

    Have you checked the coil and the igniter (inside your distributor, looks sort of like a small circuit board)?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 435 Answers

Have you check if the spark plugs fire.

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1959 chevy apache truck wont start turns over but wont start not getting spark after rotor and cap change


possible bad coil and or points and capacitor. this has breaker point ignition under that cap you changed.

May 24, 2017 | Cars & Trucks

1 Answer

Having trouble starting my 1995 Jeep Grand Cherokee. Changed out distributor cap, rotor, module and spark ignitor coil and no luck. Checked for spark by taking loose a spark plug wire and using a sc


is the check engine light on. it sounds like a bad sensor crankshaft positioning sensor or camshaft positioning sensor will cause it not to start.

Aug 16, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Changed spark plugs, changed ignition coil. still not getting any spark and car wont start


Please change the rotor and cap before you go any further. The rotor tip can be worn which can prevent charge from getting to the plug wire. The contacts inside the cap could also be corroded.

Apr 22, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Car will turn over but not start.


is it possible the rotor is in the wrong position remove cap and rotor and flip the rotor 180 degrees and you might get lucky hope this helps good luck

Apr 12, 2010 | 2000 Mitsubishi Diamante

2 Answers

96 chevy tahoe won't start?


Mine did this with a cap and rotor. I changed it six months prior, but ended up having a faulty cap from Jegs which caused it to backfire. I had crank, spark, fuel, but the cap was crossfiring and wouldn't run.

This cost me a new flexplate, two starters, still a cap and rotor just due to the backfires.

Apr 26, 2009 | 1996 Chevrolet Tahoe

1 Answer

Only does this in gear its 4.0 petrol auto,car sounds like its backfireing which is why plugs were changed but the problem persists any advice would be welcome


problem i had was car backfireing but idle was ok ,i changed the plugs,oil and air filter distributor cap ,rotor arm and finally the petrol filter its stopped the back fireing but now its stuttering on the motorway so if anyone has any suggetions on that it would be helpful and apprieciated thanks

Mar 19, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Spark after i changed distributor cap but wont start


sounds like you haven't indexed the rotor correctly or the cap isn't seated correctly.  Did you replace the plug wires correctly?  Dis you bump the position of the distributor?

Mar 13, 2009 | 1995 GMC Jimmy

1 Answer

1994 Dodge Spirit


Check the Hall Effect pickup which is under the distributor rotor. It will cause the problems you are describing if it fails. It might be sticking, then when you play with the cap or rotor you jar it loose for a while. It tells the computer that the engine is turning, like a crank sensor. Cheap fix if that's what it is.

Jul 30, 2008 | 1994 Dodge Spirit

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...