Question about 1995 Toyota 4Runner

2 Answers

It's a standard and the clutch will not depress.the engine runs o.k. and I can change the gear shift with the engine going with no grinding but nothing else happens. The vehicle does not move because the transmission is not engaged ,why?

Posted by on

  • Enos Hodder Feb 05, 2010

    no, it does not go in at all

  • badbrains May 11, 2010

    Does the clutch pedal feel like there is nothing there? Does it go all the way to the floor very easily?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Sounds like the slave cylinder or throw-out bearing may be stuck.

Posted on Feb 05, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This happened to me, a slave cylinder replacement and fresh brake fluid solved the problem.

Posted on Feb 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 legacy wont go into gear runs and you can shift thru the gears push in and let out clutch nothing get a kittle grind sound when you try reverse


could be shift fork thats in the tranny or it you could have snapped the main shaft not an easy fix you might want an expert mechanic to take a look at it good luck

Jan 25, 2013 | 1990 Subaru Legacy

1 Answer

I have an 1989 GMC Sierra K1500(4x4)5-speed. grinds when going...


It may be the transmission input shaft bushing or bearing, located in the rear of the engine crankshaft, in front of the clutch assembly. If the bushing or bearing is dry (needs to be greased), the input shaft will still try to turn with the engine rpm, even though the clutch pedal is depressed. Also, the clutch disc may not be fully releasing, which could possibly be corrected by adjusting the clutch pedal linkage. good luck

Jul 26, 2017 | GMC Sierra 1500 Cars & Trucks

2 Answers

Must depress clutch while in neutral then will be able to go in gear on 1996 jetta 2.0 manual


well usually you have to do so in order to change gears
anyway this maybe a clutch problem and or needs a gear shift adjustment
more likely the clutch plate

Sep 27, 2009 | 1996 Volkswagen Jetta

2 Answers

Grinding gears from 1st to 2nd, 3rd to 5 ok


Either your clutch is getting bad, or you're shifting down too soon, and up too late. Try double clutching. Push in your clutch and push it into neutral. Release the clutch, fan the gas pedal, push the clutch again and shift into 1st. All this does is sychronize the speed of the transmission with the speed of the engine. There were, in the 60's, a lot of cars with the old "three on the tree" that you had to do this every time, and you get pretty good at it after a while.

Jun 02, 2009 | 1995 Hyundai Sonata

2 Answers

On my 1976 Triumph TR6 when shifting I get a little grinding as it goes into gear 2nd,3rd mainly. I just rebuilt the gearbox and installed a new clutch about 700 miles ago. When its cold 2nd gear is worst,...


Sounds like a sychro problem when you rebuilt. I have always found with my gearbox, even when warm it is easy to beat the sychros so i make slower changes. Unless you fix the sychro rings the problem will only get worse

May 16, 2009 | 2006 Triumph Tr 7

1 Answer

1991 Mercury Topaz with 5-speed will not go into gear.


how much clutch pedal do you have when the car is running does the pedal feel loose? if the clutch is not disengaging when depressed it is most likely time for a new clutch

Apr 20, 2009 | 1991 Mercury Topaz 4 Door

4 Answers

Transmission shifting proublem M5R1 1997 FORD RANGER


internal slave cylinders are known to leak , unfortunate it is behind clutch assembly , i would change both , clutch master and slave cylinder

Feb 27, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Grinding and very hard to shift, and now the shifter is stuck


how does the clutch pedal feel?..clutch out of adjustment,needs clutch job...kev-mn.

Dec 10, 2008 | 1995 Pontiac Sunfire

1 Answer

Transmision shifting problem


Reverse is not sycronized, this means the gears have to stop to mess and not grind, two thing cause this, being to quick to slam into reverse after clutch is depressed, a problem with the clutch.

Jul 27, 2008 | 1991 GMC Sonoma

1 Answer

2nd gear clutching


STOP Downshifting!
STOP Forcing gear change, watch the Engine RPMs and shift accordingly, HOMBRE's are as good as the operator's. Hombre's have dash shift indicators which illuminate when it's time to 'shift' and not before, This has nothing to do with gear oil either. If you've drained it, you best fill it immediately and make sure it's ample level. The heat these gears sustain in is inceredible, cooling lubricant is essential. Here's a tip, while engine is OFF, ignition key is engaged, dash is illuminated, depress clutch peddle, keep it depressed and walk through all gears with gear shift, shifting should be smooth and unpeded, including reverse. If resistance is experienced at one or more gears, gear alignment is off as a result of inproper gear shifting while driving. Continue to drive vehicle just shift slower until clutch needs replacement then do an entire drive shaft upgrade. It worth it, it's great truck.

Jul 25, 2008 | 1998 Isuzu Hombre

Not finding what you are looking for?
1995 Toyota 4Runner Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...