Question about 1994 Buick Park Avenue

1 Answer

94 buick park ave hard start, wont stay running, lack of power

I have a 94 buick park ave; It is hard to start. It wont stay running. When it dose run it has a total lack of power... This problem came on suddenly without warning. I put in/on a new computer, coil mod, plugs and exhaust system. It has lots of spark and fuel in fact it likes to flood out. / to top it off i can get in it, start it up once in while and it runs great until i push the gas pedal then it quits / other times i have to hold my foot to the floor just to get it to start.Next im thinking cam or crank sensor i need help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Change the temp sensor on the thermostat housing, i had a problem like that on one once it fixed the problem right up.

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 park ave ultra is hesitatating when I start using the gas as I start an incline mostly but sometimes just randomly an it's getting worse


Engine Stalling Due to Mass Air Flow/Crankshift Position ...

repairpal.com > Problems > Buick > Park Avenue
Buick Park Avenue Engine Stalling Due to Mass Air Flow/Crankshift Position Sensor Failure. This is a verified ... 1997 Buick Park Avenue- 3.8L V6160,000Visitor. Engine stalls ... car runs then stalls and won't start for thirty minutes. Upvote (36).

Buick stuttering Questions & Answers - Fixya

www.fixya.com > Forum > Tags > stuttering
94 Buick Park Avenue that stutters under a light load I have a 94 Buick Park Avenuethat ... Buick Century 97 runs rough and stutters when cold and gas applie Engine runs rough ... I have a 1994 buick lesabre it starts ok but stutters and stalls.

Oct 30, 2015 | Cars & Trucks

1 Answer

I have a 95 park ave 3800 oil pan was damaged due


Do you have power at the injector plugs with the key on?

Apr 22, 2010 | 1995 Buick Park Avenue

3 Answers

I have a 1995 Buick Park Ave Ultra. The car has power but will not turn over. I was told by one shop that it might be the V.A.T.S. system and by another that it is the IGNITION CONTROL MODULE.


Make sure the battery cables are clean and tight on the battery. Check to see if the wires to the starter are tight. Try starting it in neutral to make sure the safety switch is being make. Also hold it up into park and try.

Mar 22, 2010 | 1995 Buick Park Avenue

1 Answer

94 buick park ave. i have to belts on my car the


Lossen the altenater or the idler pulley.

Dec 19, 2009 | 1994 Buick Park Avenue

1 Answer

94 buick park ave starts runs for about one minute then dies


be sure the cig lighter is working, if it does not work the scanner will not work and be sure the C.E.L. works. if not check the bulb

Apr 06, 2009 | 1994 Buick Park Avenue

1 Answer

1991 buick park avenue will not stay running and runs rough


I think you got your answer to the alarm issue. I had the same problem with rough idling, lack of power, and the chugging that occured when going up hill. I have a 1991 Park Avenue with 190k miles. Fixing the catalytic converter helped, but the real problem was in the ignition control module. It seems that older buicks will heat these units to the point that the glue inside melts and eventually exposes the electronics. Look for glue or exposed wires below the ignition coil. It's a $100 part that you should be able to change yourself. I hope that helps.

Jan 23, 2009 | 1991 Buick Park Avenue

1 Answer

Blower motor on Park AVe '94


Relace blower control module.

Jan 18, 2009 | 1994 Buick Park Avenue

Not finding what you are looking for?
1994 Buick Park Avenue Logo

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...