Question about 2006 Chevrolet Aveo
The owners manual should have info on how to reset the light. check under maitinence.
Posted on Feb 05, 2010
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
. Have the shop who preformed the oil change check it out. Maybe the tech pull out a wire to a sensor by accident. If all checks out ok then have the codes retrieved with a scanner, and have the appropriate repair done.
Posted on Mar 29, 2010
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
Posted on Apr 08, 2010
you would add transmission fluid directly into the dipstick tube. this would require the use of a transmission funnel to slide into the tube.
Posted on Jun 20, 2010
Its easy. I did mine about a month ago. You need to take off all the bolts on the top part of the motor. there are some tubes on the left side of the motor by pushing them out of the way... you take the old one off and replace it with the new one making sure its aligned and the you put it back on.. the bolts need to be hand tightened kinda as tight as you would do your tires.
Posted on Aug 14, 2010
Tips for a great answer:
Jan 06, 2013 | 2006 Chevrolet Aveo
Oct 05, 2012 | 2006 Chevrolet Aveo Hatch
Jan 06, 2011 | 2006 Chevrolet Aveo
Aug 04, 2010 | 2006 Chevrolet Aveo
Apr 07, 2010 | 2006 Chevrolet Aveo
Mar 29, 2010 | 2006 Chevrolet Aveo
Dec 28, 2009 | 2005 Chevrolet Aveo
Aug 21, 2009 | 2006 Chevrolet Aveo
Jun 11, 2009 | 2005 Chevrolet Aveo
Jan 30, 2009 | 2006 Chevrolet Aveo
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: