Question about 2003 Chevrolet Impala

1 Answer

My car windows wouldn't let down could it be the power switch??

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Check the basic area first which would be the fuses-the circuit breakers which controls the power windows.look on the passenger side labeled FUSES.

Posted on Apr 10, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Power window won't go down but you can here the motor running in the door

You can remove the door handles and power window switches and the screws in the door pad and push up on the pad and it will come out of the track and then you can see the motor and replace the part yourself. Hope this helps.

May 05, 2017 | Chevrolet Camaro Cars & Trucks

1 Answer

The auto. door locks, radio, and dome lights not working

You have burned out the vehicle's controls modules, call your insurance company, they should cover this type of unfortunate mistake.

Jun 15, 2017 | 2000 Mazda MPV

1 Answer

What causes a power window on a 2001 durango to go down but not back up

Possible bad window switch. If the window motor were bad, or if power was not getting to the switch, the window wouldn't work at all. The switch should be tested for correct operation. Remove the switch and apply 12 volts to the power terminal of the switch. Then toggle the switch and use a 12 volt test light to confirm continuity on the up and down terminals. If it is defective, replace it with a new switch.

Sep 02, 2012 | 2001 Dodge Durango

1 Answer

Venture pass window not going up i manually got it up and switch works to get it back down but not going up ruled out bad switch by taking 1 outta my friends rig and tested it that way could it be a broke...

There could be a few causes:

1) A bad window regulator or motor. It is entirely possible for a motor or regulator to fail, but usually they fail completely (meaning the window wouldn't go up OR down).

2) Broken wires or a bad connector. This will have to be traced out manually.

3) A defective driver's master window switch. Your driver's window master switch is part of the circuit for your passenger window motor/switch. If you have a friend with the same exact vehicle, I would suggest trying to swap the driver's master window switch, and see if that helps.

Otherwise, you'll have to check for proper power/ground at the passenger window motor, the two wires should switch polarity depending upon which way you press the window switch. Just make sure that when the switch is pressed "up", one wire has 'power', the other is grounded. Then press "down" on the switch- the one with 'power' will now be grounded, the one that was grounded will now have 'power'. If this is all OK, you're going to have to trace it back through the system until you find the issue.

Jul 02, 2011 | 2004 Chevrolet Venture Passanger

1 Answer

My 2005 kia spectrum passenger front window goes down but not up.i have replaced motor and no luck. what should i do?

You only replace a motor if it quits

It is a DC Motor & will run in either direction

Did you apply power to the old motor or replace
a perfectly good motor?

If it goes down & not up,wouldn't you conclude that
the switch is bad, in the up position?

Jul 01, 2011 | 1999 Kia Sportage

1 Answer

I have a 1992 Cavalier and the driver side power window won't work-I don't hear any clicking or noise. All the other windows work-the buttons are all on middle console. How can I fix this problem...

HI there your problem is the motor . each window has it's sprat
motor . to be shore check the switch by remove it from console .
and with a test light
find the wires cumming out of the switch for driver side door window
see if you have power . you should have power on one wire all
the time with ignition switch in the on bastion .if you have power
as you operate the window switch .put the window is still not going
up or down you need window motor.

good luck re post if you need more help OK

Jun 29, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

2001 ford sport trac with power rear window

You have an electric window right? if so the motor brushes are most likely stuck ( common concern), try hitting the bottom front of door panel with palm of your hand while holding the switch to down or up, if the window springs to life the motor is defective, in any event you need to pull the door panel and test the motor for 12 volt signal to one of the terminals, 12 volt signal will reverse on the connector depending which direction the switch is held to operate the window. If the 12 volts is prsent replace the motor, I wopuld recommend rockauto web site for best price.

Jul 15, 2008 | 2001 Ford Explorer

Not finding what you are looking for?
2003 Chevrolet Impala Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides