Question about 2008 Hyundai Tucson

2 Answers

Luggage cover missing needed to purchase a new one as it went missing, where and how much would it be?

Posted by on

  • jeni dsuja Sep 02, 2013

    Luggage covers are available at Luggage Armour LLC. PROTECT and PERSONALIZE your luggage With Luggage Armour, your bag is always covered-Rain, dirt, oil and grease. Your luggage is protected by layers of non-permeable water-proof neoprene and nylon. Choose from a variety of colors and prints. Add your initials, company logo or favourite art work.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

<a rel='nofollow' href="http://myluggagecovers.com">Luggage covers</a> are available at Luggage Armour LLC. PROTECT and PERSONALIZE your luggage With Luggage Armour, your bag is always covered-Rain, dirt, oil and grease. Your luggage is protected by layers of non-permeable water-proof neoprene and nylon. Choose from a variety of colors and prints. Add your initials, company logo or favourite art work.

Posted on Sep 02, 2013

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Check this out....
http://www.hyundaiaccessorystore.com/Hyundai_Tucson_Cargo_Screen.html

Posted on Feb 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a Hyundai 00285-03006 fully enclosed luggage carrier and the instructions are one picture with no words. The picture does not describe where the carrier is in the picture, where the rails fit...


That same luggage carrier is sold (as OEM approved equipment) for MANY different makes and models of automobiles. From what I can see, it simply clamps onto the cross-rails on your luggage rack. (Not much instruction needed) It does require however, that you have a luggage rack and a cross-rail kit. The cross-rail kit is sold separately. I would give you the part number, but the cross-rail kit varies depending on your make, model, and year.


dttech_88.gif


Cross-Rail Kit


dttech_21.jpg

May 22, 2011 | Hyundai Veracruz Cars & Trucks

2 Answers

2005 lincoln Ls left rear brake light bulb needs replaced. took 2 screws off but metal enclosure is tight and siliconed on. what do i do?


Lamp Assembly -Stoplamp Removal and Installation
  1. Remove the luggage compartment scuff plate.
    • Pull to unsnap.
  1. Position the luggage compartment side trim panel aside.
    1. Remove the pin-type retainers.
    1. Position the luggage compartment side trim panel aside.
  1. Remove the stoplamp assembly.
    1. Disconnect the electrical connector.
    1. Remove the three nuts.
    1. Push the rubber grommet through the sheet metal and remove the stoplamp assembly.
    • If necessary, install new bulbs.

Nov 15, 2010 | 2005 Lincoln LS

1 Answer

2008 Jeep Grand Cherokee - My tail light lens covers seem to be loose. When you open the rear deck, you can see two black plastic caps where I think there are screws behind them to tighten the actual lens...


those are not really screws. they are a "one time" clip which hold the lighs in place. I just went theu the same issue. I pull the caps with needlenose pliers, and cannot reuse the. Went to the jeep dealers and purchased 2 new ones at 5 euro (am in germany) a piece. so, I went to the hardware store and purchased 2 flat head screws and it works much better.

Oct 30, 2010 | 2008 Jeep Grand Cherokee

3 Answers

Luggage Capacity of Chevrolet HHR


all the baggage u listed will fit easily in the rear cargo area and more, my family has one of these.

Aug 04, 2009 | Chevrolet HHR Cars & Trucks

1 Answer

Porsche Boxter rear luggage compartment lid pull-button problem


remove the two plastic bungs in the side of the cover panel down side of seat, then inside are two 6mm allen screws, these need to be loosened, not removed to allow the trim to be lifted up to access switches. refitting is reversed

Jul 06, 2009 | 1997 Porsche Boxster

1 Answer

I can not lowet top and i have set tray pan in trunk i just purch


In your trunk check the luggage storage rack. This gives more room for luggage but needs to be lowered if you want the top down. hope it works for you .

Apr 09, 2009 | 2001 BMW 325

1 Answer

How do I replace a taillight lens on a 1991 Geo Storm?


Rear Turn Signal, Brake and Parking Lights


STORM COUPE
  1. Disconnect the negative battery cable.
  2. Lift the luggage compartment floor carpet toward the front of the vehicle and remove the spare tire cover panel.
  3. Remove the ten plastic retaining clips from the rear end trim panel.
  4. Disconnect the luggage compartment lamp electrical connector.
  5. Remove the luggage compartment trim panel and the rear end trim panel.
  6. Disconnect the rear combination lamp assembly electrical connector. Fig. 1: Rear Turn Signal, Brake and Parking Lights — Storm
84256028.gif
  1. Remove the seven nuts and the rear combination lamp assembly from the vehicle.
  2. Disconnect the rear combination lamp electrical connector.
  3. Remove the four bulb sockets from the rear combination lamp assembly and remove the four bulbs from the sockets. To install:
  4. Install the four bulbs to the sockets and install the four bulb sockets to the rear combination lamp assembly.
  5. Connect the rear combination lamp electrical connector.
  6. Install the rear combination lamp assembly to the vehicle and the seven nuts.
  7. Connect the rear combination lamp assembly electrical connector.
  8. Install the rear end trim panel and the luggage compartment trim panel.
  9. Connect the luggage compartment lamp electrical connector.
  10. Install the ten plastic retaining clips to the rear end trim panel.
  11. Install the spare tire cover panel and the luggage compartment floor carpet.
  12. Connect the negative battery cable.

Mar 21, 2009 | 1991 Geo Storm

1 Answer

Tail lights alway on problem


If are the lights on luggage door ,may be wiring between the body/luggage door.
They can cut off because "you" open/close the luggage door "many times".
Take out rubber cover protection and check wires.

Aug 17, 2008 | 2000 Saab 9-3 Viggen

1 Answer

Luggage carrier slats for 2008 chev. equinox


I purchased them but did not have them installed. the instructions seem simple. 1 with flat bedded tool pry the plastic covers up. 2 open the latches on the crossbars and slide them into position. 3 replace plastic covers. I have not yet try to install them yet with the same worries of scrathing or damaging the covers. The illustration shows th entire cover to come up but does not give a hint to wher you should pry it from.

Anty other info would be appreciated.

Jun 14, 2008 | 2008 Chevrolet Equinox

Not finding what you are looking for?
2008 Hyundai Tucson Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...