Question about 1989 Buick Regal

1 Answer

Driver side power window/lock control buttons on arm rest the backlight is burned out, is that easy to fix?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Buick Master
  • 2,030 Answers

Yes it is VERY

take the control panel off and you will see the connector for the light...turn the light socket to remove it...pull the bulb out...replace buld...reverse to put back together...your done

Posted on Feb 04, 2010

Testimonial: "wow, awesome answer and very fast. seems like an easy fix. I'll let ya know when I get it back from the shop, MAS sensor may be bad or something"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

2001 ontiac Montana Van front power windows only working sporadically, is it a short or does something need to be replaced?


Check for child saftey lock out switch on the drivers side you will see it near the other window controls .

Jul 07, 2014 | 2003 Pontiac Montana

1 Answer

No power to Windows


There is a switch on the driver's side door's arm-rest with all the window buttons that locks all the windows. Could that be the problem? If that is too simple, replace the fuse.

Mar 29, 2014 | 2005 Mercury Mountaineer

1 Answer

No power to driver side window and power lock


most likely you have a short in wiring harness, best thing to do is remove drivers side kick panel that cover next to your left foot while driving you should see a group of 15 to 20 wires wraped together that goes to the drivers door. once you find this grab a test light attach to a good ground remove some of the tape so you can see the wires check to see which ones have power by poking tester into the wires, write down the color code for wires that light up, then pull the power control box and check those same color coded wire when you find the bad one you can run a new wire from where you first checked it to just before the control box you can either solder or crimps then tape it up then the rest of the harness that you opened up as well. Good Luck

Nov 15, 2012 | Cars & Trucks

1 Answer

92 buick power locks stopped working


On my F250 when the windows went out I had to replace the drivers side switch to get both working again. I am putting my money on the switch is bad. Some of these control panels are all wired together in one so it would make sense that your seats went out as well if all controls are on the arm rest. This on the up side is not a difficult or that expensive to fix on your own.

Aug 31, 2012 | 1992 Buick LeSabre

2 Answers

WHEN KEY IS TURNED ON POWER non of the window will go up. WINDOWS WILL NOT GO UP.


Make shure the button lock windows on your arm rest is not engaged,check fuse on power windows,because all windows have a seprate motor it would have to be the power to them. On the rear doors they have a child safety switch that stops the window from working!

Aug 24, 2010 | 2003 GMC Yukon

1 Answer

All my power windows operate fine from the drivers side switch. None operate on there on individual switches.. What could the proble be


The simplest possibility is that you have inadvertently engaged the child-proof window-lock. This happens frequently with my rental car customers, who call complaining that their windows do not work. The button is usually on the driver side arm-rest right next to the window controls. On your car, it could be someplace else. If you cannot toggle the window lock using the button, there is a possibility that the window-lock switch itself has gone bad, and needs to be replaced.

Mar 21, 2010 | 1997 Oldsmobile Cutlass Supreme

2 Answers

Passenger side power window does not go down


I would start by locating the fuse for the power windows, if one side is working move to step 2. I have replaced window regulators on several american vehicles, the honda should be no different. Youcan order the power window regulator online on autopartswarehouse.com, or take a chance at your local junkyard. you will need to remove the door panel, start at the release mechanism inside, usually 1 screw with a small plastic cover. in addition, 1 screw in the grab area of the arm rest, also covered. at the bottom of the panel under the arm rest start to pry off the door panel, you can take it off with a flat blade screwdriver or flat pry bar. it will make a snapping sound. then proceed, there are about about 8-10 total clips. after this is done, you will need to un hook the power window and door lock connections. next remove the door light connection at the bottom of the door. remove the plastic lining as careful as possible. you will need to put this back on after you finish. usually there are three screws attached to the regulator and 4 screws, 2 on each side of the alignment tracks. in addition there are 2 screws holding the window to the brace that moves up and down. remove the window bolts first and remove the glass, then proceed with the rest of the bolts, then re assemble as you have taken apart. On the hondas I would say about 2-3 hours will be need for each window. Good Luck!!!

Sep 09, 2009 | 1996 Honda Civic

1 Answer

Drivers side window control cluster


The control may have gone bad... You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can disconnect the controls and test them

Aug 09, 2009 | GMC Denali Cars & Trucks

1 Answer

Power windows don't work


check your driver switch's(main) window lock feature button...Possible moisture inside, stuck or electrically damaged. The entire switch will need to be replaced if this is the problem. Hopefully this helps

Jul 30, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...