Question about 2000 Ford Contour

1 Answer

Replaced a alt on ford contour

How do i replaced a alt.on 6cyl. ford contour 2000

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

Dis-connect bat, take off serp belt, unbolt alt, remove wires from alt, install reverse order

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where reclaim port is located & how to remove used fliud from 2000 ford contour se 4 cyl.


The ac fluid(gas ) never gets old as it is a gas . The oil never oxidises as there is no air in the system so it never needs replacing. Most problems with ac units come from leaks and owner interference ( replacing gas that doesn't need replacing) or over filling with the wrong gas or just not understanding how and why it all works.

May 25, 2014 | 2000 Ford Contour

2 Answers

2000 ford contour 2.5 dohc charging issues


2010-11-12_171856_chg.jpgthis is a 2.0l engine but it may have the same wires as yours. I am thinking it is a fusible link problem but I don't see one in the diagram. I am seeing a fuse in underhood fuse block. Did you check it?

May 04, 2014 | 2000 Ford Contour

2 Answers

Fuel filter installation


Hello there:
assuming that thisiswhat youare loking for here Ford Explorer Fuel Filter - Hastings Product Description: HASTINGS FUEL FILTER -- OEM Direct Fit Replacement In-Line Fuel Filter, 3 1/8 O.D., 5/16 Inlet, 5/16 Outlet, 6 25/32Length, Replaces Ford F0TZ-9155-B; Baldwin BF1166,
  • 1991-1998: Eddie Bauer; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: Sport; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: XL; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: XLT; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1993-1998: Limited; 6Cyl 4.0L GAS, FI, VIN "X";
ahg8018.jpg Ford Explorer Fuel Filter - Fram Product Description: FRAM IN-LINE GASOLINE FUEL FILTER -- 7.16" Height, 5/16 (Tube) I.D., 2.13" O.D., Features High Technology Filtration, Designed To Provide Optimum Balance Between Low Restriction And Required Efficiency, Comes With....
  • 1999-1999: XL; 6Cyl 4.0L GAS, FI, VIN "E";
  • 1999-1999: XL; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: Eddie Bauer; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: Sport; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: XLS; 6Cyl 4.0L GAS, FI, VIN "X";
are several filters that willfit your vehical

Nov 22, 2009 | 1996 Ford Explorer

1 Answer

Waterpump belt


you have a serpentine belt, which is one belt drives all, so the routing of this belt is very specific also it matters whether or not you have a/c. Locate your belt routing chart under the hood before beginning. There is a tensioner pulley mounted on a spring arm, the spring arm should have a square drive hole in it, either 3/8" or 1/2" drive size you will need a ratchet of the proper size to insert into this square hole. Using the ratchet move the tension arm (away from belt) to loosen the belt and remove, route and install the new belt and move tensioner the same way place the belt over it and release. Hope this helps, let me know

May 16, 2009 | 2000 Ford Contour

1 Answer

How do i get alt off a 98 ford contour


you dont have to pull your engine out you can get the alternator out thru the left wheel well after you pull the splash panel

Apr 02, 2009 | 1998 Ford Contour

1 Answer

2000 Ford contour se Alternator replacement question


please rate as fixya if this is what you want.

you did not say if 4 cylinder or 6 cylinder. they are different.
here's 4.

SECTION 414-02: Generator and Regulator 2000 Contour/Mystique Workshop Manual
REMOVAL AND INSTALLATION Generator —Vehicles with 2.0L Engine Removal
  1. Release the fuel pressure. For additional information, refer to Section 310-00A . For additional information, refer to Section 310-00B .
  1. Disconnect the battery ground cable.
  1. Remove the intake air resonator.
    1. Disconnect the air cleaner outlet tube.
    1. Remove the bolts and nuts.
    1. Remove the resonator.
  1. Disconnect the fuel line.
  1. Disconnect the ground cable.
  1. Disconnect the generator electrical connectors.
  1. Remove the accessory drive belt. For additional information, refer to Section 303-05 .
  1. Lower the vehicle.
  1. NOTE: The lower bolt cannot be fully removed until the generator is repositioned.
    Fully loosen the lower bolt and remove the upper bolt.
  1. syp~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: There is a very limited amount of space in which to remove the generator. Do not overstress or damage any hoses or cables.
    Lift the generator clear of the engine.
Installation
  1. NOTE: To aid installation, push the sliding bushings flush with the generator casing.
--------------------------------------------------------------------------------------------

Mar 22, 2009 | 2000 Ford Contour

1 Answer

2000 Ford Contour Acceleration Probs between 40-55 mph


Transmission was initially misdiagnosed as being ok. The problem was the "range sensor", which showed up on the transmission shops diagnostic computer on a second look.

Replacement of the range sensor solved the problem. This was a $150.00 fix. Unfortunately a lot of other cash was spent because of the initial miss.

Feb 08, 2009 | 2000 Ford Contour

1 Answer

2000 Ford contour se Alternator replacement question


whats a ford contour?? if its like a mondao then its relativly easy,disconnect battery first and make sure you have the radio code

Jan 01, 2009 | 2000 Ford Contour

1 Answer

2000 ford contour


this is what you have to do you have to have a bar across the top of the engine with a chain so the engine does not fall down you also have to remove the axel on the driver side making sure you have jack stands and the car supported for safety but you can also go to auto zone and have them to print you a step by step diagram

Jul 01, 2008 | 2000 Ford Contour

Not finding what you are looking for?
2000 Ford Contour Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...