Question about 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer will turn over but not fire. I have changed cap rotar plugs wires and fuel filter.what next

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

U need to ck for spark & fuel,,pull off one plug wire & put a spark plug in it,,lay the plug on the exhaust manifold so u can see the spark plug electrodes,,have someone turn over the motor look for a spark,,,or buy a spark tester,,,

Posted on Feb 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 plymouth grand voyager not fireing at coil also fuel pump not working drove home now won't start lady lost husband with 3 kids 1 grand kid needs help


No spark at the coil replace all spark plug wire and coil wire but start with fuel pump first it wont start anyways without fuel id look into a new cap and rotar with the plug wires might get lucky and find a distributor at a wreckers for the same price as cap and rotar

Jun 10, 2014 | 1997 Chevrolet Blazer

1 Answer

1999 chevy blazer not starting


Check the plug wire from the ignition coil to the distributor cap.
If you haven't already, replace the distributor cap and rotor.
The GM Vortec's have issues with moisture getting inside the cap and rotor and causing problems.

Apr 24, 2012 | 1999 Chevrolet Blazer

1 Answer

I have a 93 s10blazer 4.3 vortec 4x4 that wont start. my fuel pump is working i replaced the ignition module, ignition coil, plugs n wires r good, distributor cap and rotar button. idk what it could be


First spray starting fluid in the air filter. If it starts it is a fuel problem. If it doesn't start then pull one of the spark plugs and see if there is spark. If there is not spark then it is an ignition problem.
If it is a fuel problem and the fuel pump is running when you turn the key on, then check fuel pressure. It should be over 35psi.
If it an ignition problem start by checking fire at coil.

Oct 25, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

It wont turn over


Coil, ignition fuse, or a bad rotor/cap issue.

Jul 18, 2010 | 1996 Chevrolet Blazer

1 Answer

1985 Chevy: I have a 1985 2.8L chevy 4x4 Blazer I just re...


All GM have ignition coil problems , your getting too much fuel , I have seen O2 sensors and plugged catalytic mufflers too many times , be careful the next ride the vehicle will catch on fire..Try the coil first

Apr 14, 2017 | 1985 Chevrolet Chevy

2 Answers

97 s10 blazer cuts out and loses power while driving.


Had the same problem with by 1998 S10 a couple years ago. Changed fuel filter?? didn't work. Changed the fuel pump?? didn't work. Changed the fuel pressure regulator?? didn't work.

I was about to the end of my rope when I put a timing light on it and it showed firing on cylinders more then once a cycle. Turns out my distributor cap was bad and spark was jumping between contacts. When a spark is spread out over more then one cylinder, it doesn't fire correctly and that is causing it to bog out. Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though.

Feb 01, 2009 | 1997 Chevrolet Blazer

1 Answer

1996 Chevy Blazer Wont run


Replace the coil packs.....

Nov 26, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...