Question about 1995 Ford Windstar

Open Question

FUSE FOR WINDSHIELD WIPERS

WHICH FUSE IS FOR THE WINDSHIELD WIPERS FOR 1995 FORD WINDSTAR

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: windshield wipers

The fuse panel is under the instrument panel to the left of the steering column. Lift the handle to unlatch the panel and pull it down. The windshield wiper/washer system uses a circuit breaker in position #2 in the fuse panel. If your washer is working the circuit breaker is OK.

Posted on Sep 22, 2008

  • 85 Answers

SOURCE: 1995 xj6 windshield wiper do not work

you can buy a fuse probe for under $5 and probe all the fuses one by one (it is a small plastic box with two prongs and an 'led' light that glows when the fuse is good). some fuse packs include a fuse probe at no extra charge. some vehicles work on circuit breakers which are small black boxes. listen to the fuse panel while turning the windscreen wipers on or off to see if you can hear a clicking from the circuit breaker. the circuit breaker protects the fuse. good luck

Posted on Nov 13, 2008

  • 1 Answer

SOURCE: Which fuse controls windshield wipers on 1996 Ford Contour

I just pulled out every fuse one by one to see if they were broken and I found one that was broken and replaced it and now my windshield wipers work.

Posted on Jan 10, 2009

  • 65 Answers

SOURCE: 98 ford windstar. power windows, windshield wipers,willnot work,.

This sound like some type of relay switch failure in the fuse box, you need check all the fuses and see if they're all intact and make sure none of them are burned out. If all these are not working you have a live wire some where in you wire harness

Posted on Aug 19, 2009

cj2176
  • 520 Answers

SOURCE: 2001 ford windstar windshield wipers do not work

These wiper controls are notorious for failing. Most likely the wiper switch is bad, but have the wiper motor tested just to be on the safe side. Hope this helps, good luck!

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the wiper relay located on a 2000 Ford Windstar


There are two relay's located in the under hood fuse / relay box . Windshield wiper on / off relay an windshield wiper speed relay .Both relay's are controlled by the FEM - front electronic module . The prudent thing to do would be to take to a qualified repair shop that has a professional type scan tool to check for DTC'S - diagnostic trouble codes rather then play a guessing game . Changing parts that don't fix the problem . The wiper switch is a input to the ( FEM ) when an input is seen the (FEM) then energizes the relay's .

Feb 26, 2017 | 2000 Ford Windstar

1 Answer

1998 ford windstar van where is the fuse to run them windshield wipers


the wiper fuses / relays are in the top left of the fusebox

26072464-4fjufq12tu5gpmpmsxl4f2eb-3-0.gif

Jan 28, 2016 | 1998 Ford Windstar

2 Answers

The windshield washer fluid isnt coming out for


Yes there are two pumps located in the wiper fluid reservoir. If your in a bind, you can switch the plugs and small hose that go to them because they are both the same. The upper pump operates the back, and the lower pump operates the front. The back won't work until it gets replaced, but it beats driving backwards.

Feb 25, 2010 | 1995 Ford Windstar

1 Answer

Windshield wiper relay


this might be a connection/ currosing problem. Check the windshild wiper relay for loose wires and then take apart the connection. Clean them up and put back together. also check your fuses.

Nov 24, 2009 | 2000 Ford Windstar

1 Answer

Winshield wipers quit working. fuse is okay


debe cambiar los carbones o escobillas del motor del limpia brisas, para lo cual debe desmontarlo o removerlo de su lugar.

Sep 17, 2009 | 1998 Ford Windstar

2 Answers

98 ford windstar. power windows, windshield wipers,willnot work,.


This sound like some type of relay switch failure in the fuse box, you need check all the fuses and see if they're all intact and make sure none of them are burned out. If all these are not working you have a live wire some where in you wire harness

Aug 19, 2009 | 1998 Ford Windstar

1 Answer

2000 ford windstar


it would be inthe fusebox . but it sound like the wiper motor is bad

May 31, 2009 | 2000 Ford Windstar

1 Answer

My 99 ford windstar has a click noise from the fuse box under the


Check if u have power going to the motor first.If you have then your switch is faulty.

May 30, 2009 | 1999 Ford Windstar

1 Answer

Where is the fuse to the windshield wipers 1995 ford contour?


10 amp in interior fuse panel. And a main 30 Amp fuse feed in interior panel. see chart in owner guide or on fuse panel cover.

Feb 24, 2009 | 1995 Ford Contour

2 Answers

Fuse for rear wiper blade 1995 ford windstar van gl


The rear wiper fuse number is 24 in the passenger compartment fuse box.

Nov 04, 2008 | 1995 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...