Question about 2003 Chrysler Sebring

2 Answers

I have an 03 Chrysler Sebring and at 3000 RPM the engine cuts out. THe oil was changed the other day, and now the check engine light is on and the oil lamp flickers at idle.

Posted by on

  • 2 more comments 
  • toomey706 Feb 04, 2010

    113,000 and it does not stop, but it will not progress through the 3000 RPM mark, almost like it's a rev limiter. It's exactly at 3000 RPM.

  • toomey706 Feb 04, 2010

    113,000 and it does not stop, but it will not progress through the 3000 RPM mark, almost like it's a rev limiter. It's exactly at 3000 RPM.

  • toomey706 Feb 04, 2010

    I had a check engine light and it came up with a cam position sensor and coolant temp switch, so I had it reset. Coolant was low and the oil level was a little high, but it's fine now. It seemed like a fuel flow issue, but could have very well been electrical with the cam sensor. I'll let you know if it comes back.

    Thanks,

    Bill

  • joyellowhors May 11, 2010

    How many miles? cuts out..engine stops?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 303 Answers

Sound like a fuel delivery issue. Maybe bad fuel plugged fuel filter limiting fuel. Also check air filter.

Posted on Feb 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

Make SURE you have enough oil in engine, check dip stick. Make sure oil is not leaking from drain plug or oil filter.

Posted on Feb 04, 2010

  • lindsay836
    lindsay836 Feb 04, 2010

    Read my response

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 sebring cuts out at 3500rpm, has engine light on, have replaced fuel pump and cam shaft sensor


Most auto stores (Autozone) will use a scantool to tell you what the problem is & clear off the check engine light. It is a free service, but I'd suggest bringing a pen/paper to write down the error code & Google it afterwards. It's definitely handy for getting rid of the check engine light.

Apr 17, 2013 | 2006 Chrysler Sebring 2.4

1 Answer

1999 chrysler sebring low oil pressure at idle


It may be the oil pump. If the gauge is going up when the rpms increase it's probably not the gauge or pressure switch. If the computer senses the oil pressure is low it will shut the vehicle off to try to save it's self from catastrophic failure. Also it may start cranking longer before starting. Thats it building oil pressure before the computer will let it start. Make sure oil is full, clean & thick.

Nov 05, 2012 | 1999 Chrysler Sebring

1 Answer

2007 chrysler sebring will start but cuts off


Do you have a check engine light on ? Common problem with Chrysler is the crank sensor, won way to check is with a scanner, connect to dlc, and goin to live data stream and watch your rpm if you have no signal while cranking that's your problem,another possible cause could be your anti theft system , is your security light blinking ,staying on or not coming on at all?

Apr 17, 2012 | 2007 Chrysler Sebring Sedan

2 Answers

What does it mean when the oil light flashes on my 2006 sebring?


Low oil pressure. Causes: Old oil, bad oil filter, low oil level or even a bad oil pump.

Aug 26, 2011 | 2006 Chrysler Sebring

2 Answers

My check engine light came on and my was bogging and chugging at 2500 to 3000 RPM and now it would not start unless I left the key turned and cranked for 5-10 seconds. Error codes are P0522 Oil Pressure...


There is a new PCM flash for this condition, the Technical service bulletin reference # is 18-026-03. The update will need to be done by a dealer. I would recommend this before replacing any parts.

Jan 21, 2011 | 2003 Chrysler PT Cruiser

1 Answer

Car will not shift gears, when driving at 30 mph


run the fault codes to find the reported fault
engine lights report on engines and transmissions
could be actuator or vacuum to actuator, dirty transmission oil or pump pressure problems

Nov 13, 2017 | 2000 Chrysler Sebring

1 Answer

Oil light on while driving 2002 Sebring


2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.

Jul 02, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2003 Chrysler Sebring Logo

580 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...