Question about 2007 Chrysler 300c AWD Sedan New Cars

2 Answers

My 07 Chrysler 300c Oil light comes on,

My 07 Chrysler 300c Oil sensor light comes on, there's a chime, and the engine cuts out all at once. Any suggestions? My bumper to bumper warranty is over already, but I still have the powertrain covered until 2012. Am I going to be covered or is this a nonpowertrain issue?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 593 Answers

The warrenty should cover this problem. The oil pressure is a very important part of the powertrain.
As for the engine cutoff, this may be caused by the
powertrain control module shutting down the engine
due to little or no oil pressure to prevent serious
damage. This could be as simple as a bad oil pressure sending unit. But it could also be the oil
pump. In any case I would talk to the crysler dealer
to avoid voiding the warrenty. Hope this helps.
Good luck.

Posted on Feb 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

If your engine is the 2.7L you should be covered, being that engine is notoriously bad and has been known to seize before it even hits 100K

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the red lighting bolt on my 2006 chrysler 300c my car wont even turn over now i know it has coolant and oil in it


http://www.autoevolution.com/news/how-to-read-the-dashboard-lights-1370.html look for the symbol

Nov 21, 2015 | 2006 Chrysler 300C Base

1 Answer

My car is dragging then it speeds up, cuts off and the engine light is on. What's wrong? Chrysler 300


You need to see what diagnostic trouble codes are stored in the engine computer ! If engine light is on there are trouble codes stored . On Chryslers you can do this on the instrument cluster ! How to read DTCs in MOPAR cars Dodge Challenger Magnum Chrysler 300C Jeep...

Aug 25, 2015 | Chrysler Cars & Trucks

1 Answer

2007 300c 5.0 hemi check engine and oil light goes on and off


Are your battery connections clean and tight? I'd disconnect the battery and check the ecm harness if that didn't work. Good luck man.

Nov 18, 2014 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

Chrysler 300C hemi check engine light reset


positive wire??? is he trying to fry your system?
you disconnect the negative wire first to avoid damage.
you reset the check engine light by plugging in an OBD 2 scanner and erasing the codes once the issues have been fixed.

Oct 11, 2012 | 2005 Chrysler 300 Hemi

1 Answer

What does tthe trouble code p013a on a 2007 Chrysler 300C mean


P013a-o2 Sensor 1/2 Slow Response - Rich To Lean

Jul 14, 2012 | 2007 Chrysler 300C

1 Answer

Rain sensor chrysler 300c wont work


Check wiring to the sensor on the windshield. Also see if sensor is coming loose from the glass. The repair for this is new windshield with sensor.

Mar 01, 2012 | 2008 Chrysler 300C 5.7

1 Answer

Good afternoon, I need to know where the engine oil pressure sensor/switch A circuit is located on a 2005 Chrysler 300C please. Manufacturer code is P1521...part code is P0520


You will have to remove the alternator to get to it I'm pretty sure. There should be 3 bolts holding the alternator in place. There is 1 you can see up top, and 2 under the alternator, all 15MM size.

But once those are broke lose and off, just swing the alternator out of the way(with belt off of course) and use a 1 1/16" Socket for the Oil Pressure Sending Unit.

After that, it is easy, it all goes on like it came off

May 17, 2011 | 2005 Chrysler 300

1 Answer

2005 chrysler 300c. The pedal is to the floor


if it is an automatic ( speed sensor mentioned ) check the gear linkage selector /cable for proper adjustment as it may not be selecting correctly into drive

Mar 21, 2017 | 2005 Chrysler 300

1 Answer

Engine light comes on, stays on, doesn't blink,


The last chime is most likely an audible reminder that the check engine light is on. It would be advisable to get the car scanned to see why the light is on. Even if the car seems to be running ok, your fuel economy or emissions could be worse than they should be.

Jul 28, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Loud tapping noise under hood of my 06 chrysler 300c


CHECK THE OIL LEVEL, IT MAY BE LOW AND WHAT YOU HEARS IS A VALVE TAPPING.

Dec 10, 2008 | 2007 Chrysler 300c AWD Sedan New Cars

Not finding what you are looking for?
2007 Chrysler 300c AWD Sedan New Cars Logo

773 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...