Question about 2000 Oldsmobile Intrigue

2 Answers

Misfiring on number 2 cy - 2000 Oldsmobile Intrigue

Posted by on

  • dwayne sagh
    dwayne sagh May 11, 2010

    have you tried changing the sparkplug and wire ? next step is checking the coil

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the 99 intrigue and the same problem happend to mine... there is a wire that is; when ur looking under your hood, just to the bottom right of your engine; well there is a wire there and i guess from vibration, it got loose and was grounding some wires and when i tightened the wires it fixed the problem, this might work. it worked for me

Posted on Feb 05, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Try replacing plugs and wires

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I convert $price per CY to $price per M3


1 cubic yard (CY) =.7645543 ( decimal point 76)cubic meters ( M3) so for example 10 CY @$1.00 per CY = $10.00 =$ 7.60 per cubic meter

Mar 11, 2017 | Cars & Trucks

1 Answer

How do know what the codes mean when u use a scanner


Your scanner should have come with a user manual with the codes listed. If it read cylinder #1 misfire, you already know what it means.

Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector

Mar 10, 2015 | Cars & Trucks

1 Answer

1996 buick century misfire


My 96 century with a 3.1 v-6 gave me fits for years shooting a 171 code(running too lean) I wound up changing the fuel filter and the problem went away. If it's been a while since the filter was changed, try it.

Jul 03, 2014 | 1995 Buick Century

1 Answer

I have 2003 trailblazer its idling low and misfire check engine light flashing had it scaned it was map censor and cy 2 misfire ok we put new map censor and new coil pack on 2 it ran great for like 10 min...


You need to figure out what's causing the miss first. If the code was 302 or 303 the cylinder is not producing power, but the reason is a mystery. It could be ignition, the injector, or a compression problem. Since the cylinder problem changed, I doubt its compression.
The code for the map sensor could be something other than the sensor too.

Mar 09, 2014 | Cars & Trucks

2 Answers

Nissan suuny fb15 misssing on no2 cy plug and injecter good


misfire, cylinder 2, P0302 , is the OBD DLC code.
you forgot to state the year, or country? making help , near impossible. but ....Ill try, in the generic.

1: low compresion (tool is called, a compressiong gauge)
2: bad spark to #2 (a spark tester)
3: bad injection (check coil for about 10ohms , listen for click,
then use a NOID lamp to see if injector is firing.
if its firing , then do a power balance test. on all 4.
that is how to do this. all EFI. OTTO cycle engine.

Oct 01, 2013 | Suzuki Cars & Trucks

1 Answer

Started running rough advance auto told wife there were two codes p0305 p0316 our 2003 ford explorer 4.0 6 cy


The problem is at the 5th cylinder and a misfire during start up based on the error code. Inspect first the said cylinder. Check if there is spark or if you need to have the plug replaced. It could also be a bad high tension wire. This may solve the 2nd issue which may have triggered it.

Sep 06, 2011 | 2003 Ford Explorer

1 Answer

Hi my s-type 01 y has a misfire on cy 2 dtcp 0302 plugs are ok and so is the coil it is undrivable,but starts fine and runs ok for about 15 sec then starts to hunt/miss i have taken off fuel injectors and...


PAUL, This is a classic case of where the sparks plugs were NOT gapped before installation?



Welcome to fixya

Hello


I have a solution for this


Press Ok, Accept or replay so we may get started


Your pre-solution is coming up shortly


PLEASE REPLY OR LEAVE COMMENT TO CONFIRM YOU RECEIVED THIS EMAIL


My name is Bruce

Jan 19, 2011 | 2001 Jaguar S-Type

1 Answer

Have a 2000 mits galant-4 cy- misfire on cylinder 2 -Is there a way to check it or test- have already changed out wires connected to ignition coil.


You can buy a coil tested from advanced auto for 10 dollars to identify the spark. Have you checked compression?

Nov 24, 2010 | 2003 Mitsubishi Galant

1 Answer

Missing under load, number three cy,inder was


Next step is the camshaft position sensor.

Mar 21, 2010 | 1999 Suzuki Vitara

1 Answer

Y have 1989 wrangler 6 cy,how I now if is 4.0 o


Bring the vin code to a dealer and they can tell you. The .2 dosen't mean much unless you are changing pistons or connecting rods.

Jun 25, 2009 | 1989 Jeep Wrangler

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...