Question about 1997 Chevrolet Tahoe

1 Answer

How do you take off drivers side door panel.....inside door handle not working

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

Handle is broken inside needs replaceing pop offplastic cover with screwdriver removebolts buy handle first to see location of attacments

Posted on Feb 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Hyundai Elantra SE - Driver side rear door won't open from the inside or outside.


You will need to remove the inside door panel, what that takes I don't know, but it must come off to access the door latch, there you will likely find the latch release control rod has come off or the latch is defective.

Jun 20, 2017 | Hyundai Cars & Trucks

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

Driver side door is jamed shut. ouside door handle and inside door handle broke. can't open door. how do i get the door open or can you take inside driver side door panel off with door closed?


i don't know about taking the panel off with the door closed, but you should be able to remove the inside handle. there should be just one screw holding it in it should be right in the middle usually it is covered with a plastic cap. once you get the handle off manually pull the mechanism and open the door.

Apr 18, 2011 | 1999 GMC Suburban

1 Answer

Driver side door handle (outside) and gas pedal 2000 Camry


Bring the vehicle into the dealer if you have a sticky gas pedal. This is a TOYOTA PROBLEM.
Door handle:
It easy ! You need a philips2_bing.gif and flat screw driver,and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch with the flat screw driver and disconnect it. On the side of the door panel just above the striker/loch mechanism is this plastic push pull type of a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in TWO pieces. Use philips and get the only hold down screw you see out.( you may have to pry out a little screw cover first) Now the inside door handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.

Next lift the plastic cover and remove the door handle hooks and levers . Basically use common sense this is easy stuff. There may be two screws from inside of door panel that keep handle in place . Then work handle loose from outside and inside . reverse for installation.

Jan 27, 2010 | 2000 Toyota Camry

1 Answer

Drivers Side Door Handle


You need to take inside door panel off This just clips on but there are screws in armrest and inside door handle look for any other small square covers that may hide screws Lift panel up Make sure window is up Disconnect wiring from panel and you can now get at door handle linkage and bolts

Jul 10, 2009 | 1989 GMC S-15 Jimmy

1 Answer

Outside driver side door handle won't work. Feels like it's disconnected.


Take the panel of the inside of the door, you will probably find the wire has slipped out of the door handle.

Apr 26, 2009 | GMC C1500 Cars & Trucks

1 Answer

Driver side door mechanism


Can you open the door with the inside handle? If you can, the problem is probably a broken plastic fitting inside between the outside handle and the door latch. There are door panel removal tools available at your local parts store that look like short handled wide bladed pry bars. You could get by with a good stiff putty knife if needed. Take off the arm rest, window crank, and speaker grill if you have aftermarket speakers. Slide the door panel removal tool under the edge of the door panel and CAREFULLY pop the clips loose from the door frame. You could always leave the window open and do the "Dukes of Hazard" thing, but then you would have to change the paint scheme.

Apr 15, 2009 | 2000 Suzuki Esteem

1 Answer

Drivers side door on my jeep cherokee will not open from inside


most likely the inner door handle has a broken hooking tab for the rod to the latch plate.most door panels are held in place with a few screws around the door pull handle and arm rest than most of the sides and bottom of the door panel are held by plastic snap clips. with a large straight blade screw driver start at a corner of the door panel , slide the blade of the screw driver under the edge of the panel and lightly pry out untill you lossen up one of the clips than slide along the screw driver to the next clip , keep going till the panel is lossened up.

Mar 29, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Drivers side door handle won't work


Some linkage maybe broken on the door handle. Door panel removal instructions are availablel on line www.carstereohelp.com/strford.htm but determining the problem will have to be found on your own.

Nov 12, 2008 | 2000 Ford Focus

1 Answer

Door handle


the inside handle and otside both work the release seperate.
what you need to do is take the door panel off the inside by a couple screws (usually in the arm rest) and several plastic clips
around the perimiter which will pull out when you pry out on the panel. You can do this carefully with a screw driver but the proper
fork tool from parts store will be easier. look inside door at latch
and see if your piece is broke or possibly the rod may have just come out and need to be put back in place. If your handle piece is broke it is easy to replace once your inside the door.

Sep 04, 2008 | 1991 Buick LeSabre

Not finding what you are looking for?
1997 Chevrolet Tahoe Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...