Question about 2006 Chrysler 300

1 Answer

Hi I have a 2006 300 Chrysler 300 limited My abs light and the esp light stays on. What is causing the issue?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

I have looked over the book, the only thing I could find that affects both of these systems is the "Anti-lock brake module". Doesn't look to be to big of a job, however it appears that this will be a dealer purchased part. I do not guarantee that is the problem, if possible you may want to have your local auto parts store hook it up to an OBD2 reader, with electrical systems this should quickly pinpoint the problem. Be aware their are two different types of modules on these cars (one per car), if you decide to purchase this, ensure they give you the correct part.

Hope this helps.

Posted on Mar 12, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bas/esp light is on inmy jeep commander 2006

This video is for a liberty, but all Jeeps should be similiar.
Jeep Liberty How to fix Traction ABS EST Light Codes C1240 C123F Also a guy in a forum says that it might involve a recall of the DCX recall applying to ABS modules on many Chrysler, Dodge, & Jeep products including the Commander. I'd call your dealer and ask, they might fix it for free if it's a recall.

Nov 17, 2016 | Jeep Cars & Trucks

2 Answers

Esp bas light is staying on on my chrysler 300 what is that and how do i fix

See a repair shop that does brakes. Be prepared to pay for a diagnostic fee to find problem.
That's an ABS light.

Nov 11, 2014 | Chrysler 300 Cars & Trucks

1 Answer

My abs, brake, esp/bas, and esp/tcs lights all came on at once. Every time I start the car they are off and about thirty seconds into motion they all come on. Brakes seem to be functioning fine. ...

Most likely ou have speed sensor that Is not giving the correct info. At startup the abs does a self check and since the light stays off until you drive it there is no issue with the systems integrity. The light comes on after you start to move because the system is not seeing the info it should be seeing. Your best course of action is to have the abs system scanned for trouble codes. This will help narrow the possibilities. Once you have the codes post them here.

I’m happy to assist further over the phone at

Jun 06, 2012 | 2008 Chrysler Town & Country

1 Answer

I have a 2006 Chrysler 300 Limited, everything seems to be working fine except one problem. I sometimes get the ABS, Traction Control and ESP lights, and they all stop working, which becomes a safety issue...

sounds like wheel speed sensor or air gap on sensor causing intermittent loss of signal, wheel bearings that have play can cause similar condition. With a scanner you can check to see what history codes may be present, if the light(s) are not on when you scan it or have it scanned. Hope this helps

Jan 24, 2010 | 2006 Chrysler 300

1 Answer

ESP and ABS lights come off and on...They don't stay on long, but come on out of the blue while driving. Only on the inerstate at normal driving speeds.

one of the ignition wires are losing power. this was a common problom ona few chrysler vehicles including the trucks.

Nov 08, 2009 | 2004 Chrysler Crossfire

1 Answer

Car stalls after check engine and esp lights turn on

Sometimes the issue is with the mechanical vacuum pump off to the side of the ABS/ESP module. It looks like a round silver canister. This issue is all over Google with many possibilities but the one I copied is most common.

Oct 29, 2017 | 2001 Audi A4

1 Answer

Where are the esp senors located on a 2006Chrysler 300 limited

There are alot of things that will make those lights turn on. Get it checked at the dealer. Could be an ABS sensor/module, could be the steering angle sensor, or other things.

Jul 21, 2009 | 2006 Chrysler 300

1 Answer

Fit new indicator stalk to VW passat esp , abs light on now

the stalk should have no interference with the abs or esp set up what i would look at doing is checking your abs sensors they can go all of a flash...goodluck

Jun 19, 2009 | 2004 Volkswagen Passat

Not finding what you are looking for?
2006 Chrysler 300 Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides