Question about 2006 Hyundai Sonata

1 Answer

I connected yhe power and ground wires but the radio wont turn on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Hi
1. Try with the ignation switch in ON position.
2. Check if wiring is correct i.e. Red wire to wire and Black to ground.
3. Check the fuse.

Regards
Berry

Posted on Feb 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio wont turn on after installation on 1993 geo trackdr


not even the dial show stations , the display active (not back light)
but shows its digitally active??
if not, the fuse is blown or there is no power to radio.
or its ground is open.
or OMG bad radio
it only takes, 5min to bench test any radio.
wana learn.?

Jun 21, 2014 | 1993 Geo Tracker

1 Answer

Radio nissan sentra


Check it for a good ground make sure they haven't tried grounding to the plastic somewhere

Mar 03, 2014 | Cars & Trucks

1 Answer

1999 Mazda millenia Electrical issues


the first thing to do is to remove the wires your sister conected, tape them seperately, these wires are power and ground wires and power the light in the visor mirror , they can not touch, so make sure they are apart and not touching any metal surface, tape them, one at a time.

there must be a blown fuse, did you check all the fuse boxes? there is one inside and one under the hood. start with this .

May 05, 2013 | 1999 Mazda Millenia

1 Answer

I have an 89 camaro rs, I am getting power to the red power wire on my radio, but when I turn on the car I get no response and cd radio will not work. Any ideas?


there are two power wires to most radios. usually red and yellow. the red wire provides 12v when the key is turned on and yellow provides a constant 12v. both must have power to turn the radio on. there will be two fuses for the radio also so make sure both fuses are good. the only other thing that will keep the radio from coming on is the ground wire "usually black" that has to be connected to the ground in the factory harness or you can just connect it to any bare metal behind the dash

Oct 20, 2012 | Cars & Trucks

1 Answer

I just bought a 2006 Toyota Corolla S, and my dash lights and tail lights wont come on. All the other lights work, such as the headlights, break lights, turn signals, four ways, front fog lights and...


the tail light issue could be just bad bulbs, check them with a meter ,, also, check the sockets for power to each contact point,, normally if the brake lights and flashers are working, the tail lights should too,, as far as the dash lights have you installed an after market stereo? If so a common problem is a wrong wire got grounded,The harness from the car to the factory radio has a wire for the dash lights that shows up as ground with the light off. When the lights are on the wire is 12V+. Check to see if you connected the ground from the new stereo to this wire. The radio will work perfect but everytime you turn thr park light on the fuse will blow...and the radio will continue to work. There should be a ground wire in the harness as well, ensure you connect the ground from the new stereo to this wire. there is a 15 amp fuse that blows, check them with a meter rather than by sight

Aug 07, 2011 | 2006 Toyota Corolla

1 Answer

The radio in my 1998 Ford ranger does not turn on. It is not a fuse and it is not the radio (I have tried another one, and it does not turn on eithr). Any ideas?


Then it has to be lacking power or ground. Use a test light to see if there is power at the radio, where it plugs in. If not, all you can do is keep probing the wire back toward the source, and see where the problem is. Or, run a separate power wire. 2. Check your ground wire and connections. Run a separate ground wire.

Nov 27, 2009 | 1998 Ford Ranger SuperCab

1 Answer

My radio works when it wonts to


bad ground wire at radio...recheck radio ground wire....sounds like a bad connection

Nov 22, 2009 | 1993 Dodge Daytona

1 Answer

Dashboard Lights wont turn on


You have wired something wrong. Find a different power wire for your radio. Best to hook a power wire into the fuse box, and have an inline fuse for you radio. And then run a ground wire to your steering column or something.
If it's not that, then you must have pulled a wire off somewhere, and now it's grounding out and blowing your fuse. Have fun. Wiring sucks!

May 20, 2009 | 1986 Ford F 250

1 Answer

Radio


check to see if you have it hooked up right. use a wirer tester and see which is the constant wire and which is the battery wire. the constant wirer is always on and the battery wire is on when you turn your key on. and check to see if your ground is properly connected to a ground spot. if you hear or see a spark then there goes your fuse so be carfull on where you put your wires.

Dec 24, 2008 | 1999 Oldsmobile Alero

2 Answers

Wont hold charge in expedition


  1. Check the wiring of the new radio installed as follows..
  2. Disconnect battery ground
  3. verify radio ground wire is grounded to metal
  4. verify radio hot wire (normally red and thick) is connected to a power source that is off when the ignition key is in the "off" position.
  5. verify that the always hot wire is connect to a constant 12v power supply even with the ignition off.
  6. make sure the pwr antenna wire if not used is taped at the tip and not touching any metal.
  7. verify that all speaker wires are connect correctly and not shorted to ground.
  8. connect battery ground you may get a small spark if your courtesy lites work.
  9. start engine verify your battery is charging by disconnecting the battery ground cable while the engine is running, it should continue running if it don't, alternator maybe bad.
  10. If it continues running problem solved..

Nov 11, 2008 | 1987 Ford F 350

Not finding what you are looking for?
2006 Hyundai Sonata Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...