Question about 1989 Ford Econoline

1 Answer

My 1989 ford e150 van doesn't start. battery is good, selenoid is good, new ignition switch, there is no power to fuse block and ignition switch.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 75 Answers

There is also an ignition relay, a coil, and the wiring harness it's self. Check to see if the ignition can be by passed by using a test light first to find the hot side of the ignition fuse. See if there is power there it should be constant all the time but it only makes the connection when you turn the key. If it does it's probably your relay. You are aware that there is two fuse blocks for the ignition. If there is no power to either fuse block i would buy another ignition switch (you can always take it back).. and if still nothing i would replace the harness.. hope i could help. oh one other thing check the ignition module.

Posted on Feb 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 Ford Econoline 150 Van will not start


Most all vehicles have main power cable to starter solenoid which is mounted on the starter where the power cable to the switch connects OR there is a separate heavy gauge red wire connected to the positive post of the battery that leads to the ignition switch. Also check your ground cable by connecting battery jumper cable to negative post on battery and other end to metal frame of van.

May 22, 2017 | Ford Econoline Cars & Trucks

1 Answer

No voltage to #25,#31 and #36 fuses on a e150 ford fuse block


check the large fuses in the under hood fuse box or a bad ignition switch

Sep 04, 2012 | 2003 Ford E150

1 Answer

93' FORD E150 won't start and doesn't even click or turn-over. Battery and fuses are all good. What could be the problem?


Wires to the starter could be the problem. Check for corrosion on wires. Starter sylinoid maybe the problem the starter is grounded be the bolts holding it on so I would check the wires on the sylinoid

Apr 11, 2012 | Cars & Trucks

1 Answer

My 2000 e150 ford van had a intermitting start problem, but now won't start at all, it cranks over fine but won't hit. it has 105000 miles on it. any suggestions?


my 1989 ford econoline van 5.0 liter electronin ignition was going down the road and it quit now it will not start

Feb 17, 2011 | 1989 Ford Econoline

1 Answer

1989 e150 van with dual tanks. currrently it runs on the rear tank and when I hit the switch it does not switch over to the fwrd tank.


my van does not run right its not getting enough power . I have changed fuel tank, its not holding charge in my brand new batteries.i need a fuse box digram to where what fuse goes where.., my manuaul i do not understand.

Jul 26, 2010 | 1989 Ford Econoline

2 Answers

1996 Ford E150 econol, 5.8 L 351 Stalls sporadically, runs great.


Did you check your fuel pump to see if it is functioning right or not .

Sep 16, 2009 | 1989 Ford Econoline

2 Answers

86 e150 w/FI 5.0. no power to fuel pump system.


If pump does not work when power is directly applied, then pump will need to be replaced. Have you tested the power from the fuel pump relay?

Aug 24, 2009 | 1986 Ford Econoline

1 Answer

I have a 1989 F150 4x4 that won't start. I've replaced the ignition switch, a broken ignition switch actuator, and the EEC Power Relay -- it still won't start. I have full power for radio, headlights, and...


Try jumping the starter solenoid (between small terminal and the positive side) to see if it starts, if so replace selenoid; if not check to see if small wire is hot(someone will havfto hold the key in start position for you); not hot got broken or blown fuse some where.

Nov 29, 2008 | 1989 Ford F 150

1 Answer

95 ford e150 no power no lights no start


So many directions to go....I would start with making sure you have a fully charged battery and good connections to the battery and starter as well as the starter sloenoid.As i recall there is fusable links that give power to the whole system and they are located on the solenoid this is assuming what you mean by no power no lights no start is when you turn the key it will not turn over at all.
Let me know
Jim

Oct 07, 2008 | 2003 Ford E150

Not finding what you are looking for?
Cars & Trucks Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...