Question about 1995 Ford F150 Styleside Regular Cab

2 Answers

95 f-150 5.0 liter has spark and fuel to throttle body just replaced cap,rotor, plugs and wires still no start, not even with starting fluid. whats up????????

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 552 Answers

In your distributor there is a module and when this goes bad the car will not start

Posted on Dec 06, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 109 Answers

Check for injector pulse, if the injectors are not powered then no fuel will get to the combustion chamber.

Posted on Feb 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will turn over but wont start


Do you have normal compression, spark, and fuel pressure ?
Will it try to start if you spray starting fluid into the throttle body ?

Feb 11, 2014 | 1991 Cadillac Fleetwood

1 Answer

95 chevy s10 with a vortec v6. has a mis


The Vortec 4.3 liter V6 is notorious for problems with the fuel injector.One injector solenoid feeds all 6 injector nozzles,and sometimes one whole side of the engine will not get any fuel.See if you can smooth out the engine by spraying some starting fluid into the throttle body(remove the rubber hose from the throttle body).If this doesn't seem to make a difference,you may just be dealing with an ignition problem(cap/rotor/wires/carbon tracks on the spark plug insulators).

Mar 24, 2013 | Cars & Trucks

2 Answers

Cranks but wont start


you need to check for spark at the plugs while cranking.then check for fuel entering the intake at the injectors.you don`t say if its a 4 or 6 cylinder.if its a 4 cylinder you can look into the throttle body while someone cranks the motor and you should see fuel squirting into the intake.if you have no spark then check to make sure the cap and rotor is in good condition and the rotor is turning(if not then the timing belt maybe broken and needs replacing.also check the plugs as if they are worn so bad you won`t get any spark.a common problem on these is the coil pickup in the distributor going bad.there is a 2 wire connector that comes out of the distributor with a plug,if you follow this wire back into the distributor you will see the pickup.also check and see if you can hear the fuel pump running while cranking,you may have a bad fuel pump.you may have to remove the gas cap and listen at the filler neck or listen under the car were the gas tank is.if the fuel pump is not running then you can hit the fuel tank in the middle while someone cranks the motor and it might start.if so then the fuel pump is no good another common problem.there is a fuel pump relay under the hood on the drivers side that sometimes goes bad or there is bad connections.most of this checking is good for the 6 cylinder as well except you can see the fuel squirting into the intake.it could also be a bad computer that will have to be checked out at a shop.

Apr 10, 2011 | 1991 Plymouth Acclaim

1 Answer

Hi. i have a 1994 s10 blazer and it will not start for anything. i changed the injectors and the fuel pump, spark plugs are fine and tubes are in the right posisioon, do you know what it could be.


Anytime a car wont start its missing one of the key things it needs to start. Air, Fuel, spark or compression. The first thing to check is to pull a wire off the spark plug and put a screw drive in the end of the wire. Lay the screw driver on the engine near metal. Crank it and look for a large blue spark it should make a nice popping noise.
If no spark try the same thing with the coil wire. If spark its the cap or rotor. No spark its the coil or module.
If the plugs have spark, try pouring a small amount of gas in the throttle body and see if that starts it. If it does, fuel problem check filter and pump.
If it wont start with either or gas in the throttle body and the plugs have spark then it is either a timing or compression issue. Remove the plug wire from the center of the distrib cap and then remove the cap making sure no wires come off. Have someone crank the engine and see if the rotor spins. If it does not you need to replace the timing chain/belt. If it does spin rent a compression checker and check each cylinder.

Hope this helps.

Aug 25, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Three days ago i had to remove the intake manifold on my 1994 gmc yukon 5.7 liter had to remove throttle body and dist have replaced along with dist cap, rotor and coil the truck ran fine but now won't...


Check to make sure the coil wire is secured to the distributor cap and rotor.
Also check that the rotor is not cracked (even if new) and that the spark plugs are not loose - wires are not loose, frayed etc.
Also, make sure all connections on the battery, ground at chassi, and positive on starter are in good repair as well.
Please, let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert @ Fixya.com

Jun 24, 2010 | GMC Yukon Cars & Trucks

4 Answers

I have a 2000 chevy s 10 with 152,000 miles on it what does a tune up consist of


I would change the spark plugs, spark plug wires, distributor cap and rotor, fuel filter, check and change air filter if dirty, check timing, check and top off all fluids, check or change transmission fluid, check brake pads/.shoes and drums/rotors for wear and check tire pressure, check the condition of all belts and hoses and replace as needed, check condition of radiator antifreeze and top off or replace as needed.

Jun 10, 2010 | 2000 Chevrolet S-10

1 Answer

1996 dodge ram v6 will not start and run. the last mechanic said it might be the fuel pump or catalytic converter. please list the checklist of items, to test and review, to get it running


spray fuel starter fluid in the throttle body.if it runs,it is a fuel issue.
check the voltage at the fuel pump wires,should be 12 volts.
bang on the tank with a piece of 2x4 and see if the pump starts .
sometimes the pump has a dead spot.
check for spark with a spark tester.
check the plugs,wires,cap rotor,timing,and grounds first.

Feb 26, 2010 | 1996 Dodge Ram

4 Answers

Won't start. turning, but won't fire.


If you think its fuel, spray some starter fluid inthe throttle body. If it fires up, you have a fuel problem, otherwise, check your spark plug wires, distributor cap and rotor. Also, check your fuses.

Feb 05, 2010 | 2002 Jeep Grand Cherokee

1 Answer

1988 honda accord lxi- will start if I spray starting fluid into the throttle body. will not start in hot weather


Clogged fuel injectors. Or, starting fluid is basically high octane fuel which doesnt require efficient or hot spark plugs to start, so maybe you need to look at your ignition system, especially your spark plugs, wires, or cup rotors -- perhaps they are not delivering a hot enough spark for regular fuel. While at it, also check the ignition timing. In other words, clean your injectors and get a tune up. Finally, make sure the throttle body is not leaking air. 

Jun 11, 2009 | 1988 Honda Accord 4 Door

1 Answer

Truck wont start


Spray starting fluid in throttle body to see if it starts if so change the fuel pump. Check fuel pump make sure it is kick on the fuel pressure should read 30 psi to start the truck.

Apr 22, 2009 | 1995 Ford F150 Styleside Regular Cab

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...