Question about 2000 Jeep Grand Cherokee

1 Answer

Changed front brakes on 2000 grand cherokee, bled brakes, and pedal seems spongier than normal

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,826 Answers

You still have air in the brakes,start at the master cylinder,then the rear,right wheel,left rear,and right front,then the left front.Make sure the calipers are releasing completely ,if they are not,then a brake hose could be bad.

Posted on Feb 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 Jeep Grand Cherokee brake pedal goes all the way to the floor. Recently replaced calipers and master cylinder and bled the whole system. Brake pedal goes all the way to the floor when first pushed...


Not bleed properly
or you have a rusted out line (leak)

There is NO Procedure-- that when driving a
vehicle or bleeding brakes,do you ever pump them

Dec 03, 2014 | 1994 Jeep Grand Cherokee

1 Answer

2000 Chrysler Grand Caravan, replaced the front driver brake caliper, the brake lines from the master cylinder to the ABS and the rubber hose from the caliper to the brake line, bled all the brakes but the...


i suggest a bad master cylinder, but 1st answer this, when you apply brakes firmly and keep pressure on the brake pedal, does pedal go down while you're holding pressure on the pedal? if so, the master cylinders bad. and also have you checked the vacum to the brake booster?

Aug 24, 2010 | 2000 Chrysler Grand Voyager

1 Answer

My Jeep has low brake pedal. I have bled the


Some time the brake fluid gets water in it and this can have a effect! Some vechicle recommend replacing the brake fluid every few years for this reason. Just a thought

Jul 01, 2010 | 2005 Jeep Grand Cherokee

1 Answer

Brake petal goes to floor


if you cant find any leaks in lines or cylinders or calipers u probaly have a bad booster
see lots come threw my shop like that but also their is a vacum line that runs to the booster and it hooks to a plastic valve that goes in to the booster those get gloged and you loose pedal as well try replacing that before you bye a new boooster

Mar 26, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Changed front brake pads. brake pedal goes to floor. no brakes


Something doesn't sound right, you shouldn't have to remove the brake line to install pads. Did you have to do this on both sides? Do the new pads and the old pads look the same? Did you get the caliper on crooked? Just recheck your work first before replacing more parts. When you install the caliper, You have to hook the pad on one side first before you slide it over the rotor.

Mar 26, 2009 | 2000 Jeep Grand Cherokee

1 Answer

2000 Jeep Grand Cherokee brakes make a hissing noise


has your brake pedal seem to be stiffer than usual? the sound you hear is from the brake booster if it has a leak it will cause a noise but you would have a stiffer pedal because the booster is loosing vacuum.

Feb 08, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Is the brake booster going out?


Let me know what you find out. I get the same whoosh/pedal travel, and at this point have NO braking at all. I am also losing fluid nearly as fast as I can put it in if I use the brakes, but I can't find where it's coming out. I even drove on clean snow and don't see any fluid tracks...

Oddly enough if you are going to do it yourself, gmpartsdirect seems to have the best prices for OEM parts.

I am assuming that my rusted/pitted brake lines have failed me. Aaahhh the old money pit.

Jan 13, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...